bigblock990 Posted March 17, 2019 Share Posted March 17, 2019 (edited) Hey all, some items for sale: 2) Gigabyte x99 SOC Champion Mobo comes full box bundle. It is insulated with LET. The ILM has been modified so that standard M4 2011 mounting works, and also 6-32 rods can pass through for mounting a cpu pot. **pcie_1(1st slot) is stuck in 8x mode, pcie_2(3rd slot) works 16x** I mainly used this board for 2d. No idea when or how this issue happened. I never attempted any troubleshooting or fixes as I have x299 to bench 3d. https://imgur.com/hSnmSQGhttps://imgur.com/lJQ5i2Thttps://imgur.com/tBc6Enkhttps://imgur.com/vE42ODshttps://imgur.com/eFPA2Fx 3) 5960x L522C026 Retail cpu, great condition. Comes cpu only, no packaging. Benched on ln2 once, however I lost my notes on it for temps and volts. Recent air test: https://imgur.com/wgPBbSM CBR15 47/45 @ 1.23vcore ln2: https://hwbot.org/submission/3598112_ https://hwbot.org/submission/3600720_ 1) $900usd SOLD 2) $150usd 3) $400usd 4) $400usd SOLD All prices are OBO. Shipping to USA 48 included. I can ship worldwide at buyer expense. Thanks for looking! 1) Intel i9-9900k - SOLD Cpu in excellent condition. It has NOT been delidded or lapped. Comes with full retail packaging. 6900 r15, 6950 gpupi, 7300 32mhttps://hwbot.org/submission/4061900_https://hwbot.org/submission/4062941_https://hwbot.org/submission/4104085_ You can check my profile for other results. All my best 9900k subs are this cpu. Ofcourse depending on paste, cpu pot, mobo ect your results may vary slightly. https://imgur.com/aL7lGUb 4) 5960x J625A776 Retail cpu, great condition. Comes cpu only, no packaging. Never tried ln2 Recent air test: https://imgur.com/j4InTgb CBR15 47/43 @ 1.20vcore https://imgur.com/2D4b1g5 Edited April 10, 2019 by bigblock990 2 Link to comment Share on other sites More sharing options...
bigblock990 Posted March 20, 2019 Author Share Posted March 20, 2019 Bump Link to comment Share on other sites More sharing options...
unityofsaints Posted March 20, 2019 Share Posted March 20, 2019 5960X doesn't go for that price anymore, especially unbinned 1 1 Link to comment Share on other sites More sharing options...
bigblock990 Posted March 20, 2019 Author Share Posted March 20, 2019 (edited) 18 minutes ago, unityofsaints said: 5960X doesn't go for that price anymore, especially unbinned Price is OBO. I sold one on ebay two weeks ago for $457. If no one here is interested after a while, I'll put these ones on ebay aswell. Edited March 20, 2019 by bigblock990 1 Link to comment Share on other sites More sharing options...
Max-Hardware_Numb3rs Posted March 21, 2019 Share Posted March 21, 2019 Does the 9900K suffer from CB? Link to comment Share on other sites More sharing options...
bigblock990 Posted March 21, 2019 Author Share Posted March 21, 2019 2 hours ago, Hardware_Numb3rs said: Does the 9900K suffer from CB? No, can run full pot no problem on both mocf and apex. Link to comment Share on other sites More sharing options...
Administrators websmile Posted March 21, 2019 Administrators Share Posted March 21, 2019 Just for the record, a 5960X which does CB15 4,7GHz at 1,2-1,23v is top tier, since when is a cpu of that quality unbinned? You can always discuss about scaling but if you don´t like the price, grab ten from ebay and hope to find a cpu doing anywhere near this, 1,19v 4,7ghz went way above shop price in its days. If you don´t like prices, send PM next time and hope seller can follow your reasoning 7 2 Link to comment Share on other sites More sharing options...
OCX.Chile Posted March 22, 2019 Share Posted March 22, 2019 My first 5960X did 4700 with 1.45v with the same SOC Champion, 1.25v or below for same freq is cleary better silicon, top tier without doubt. 1.2v or less is very hard to find. Pricing is OK, considering 5960X has some maxed benchmarks. GLWS BB Link to comment Share on other sites More sharing options...
unityofsaints Posted March 24, 2019 Share Posted March 24, 2019 On 3/22/2019 at 12:18 AM, websmile said: Just for the record, a 5960X which does CB15 4,7GHz at 1,2-1,23v is top tier, since when is a cpu of that quality unbinned? You can always discuss about scaling but if you don´t like the price, grab ten from ebay and hope to find a cpu doing anywhere near this, 1,19v 4,7ghz went way above shop price in its days. If you don´t like prices, send PM next time and hope seller can follow your reasoning Does Haswell-E always scale as expected from ambient to LN2? I was talking about the chip that hasn't seen cold, obviously the other one is top tier. Link to comment Share on other sites More sharing options...
Administrators websmile Posted March 24, 2019 Administrators Share Posted March 24, 2019 Haswell-e scales, variances are normal though like on all platforms. Normal way to bin these is search best low volts from 4,5ghz upwards, the higher you test (4,7ghz is already above average binning frequency) the better Link to comment Share on other sites More sharing options...
bigblock990 Posted March 28, 2019 Author Share Posted March 28, 2019 Bump Link to comment Share on other sites More sharing options...
bigblock990 Posted April 2, 2019 Author Share Posted April 2, 2019 (edited) Price drop 9900k SOLD Edited April 2, 2019 by bigblock990 Link to comment Share on other sites More sharing options...
bigblock990 Posted April 6, 2019 Author Share Posted April 6, 2019 Bump Link to comment Share on other sites More sharing options...
bigblock990 Posted April 10, 2019 Author Share Posted April 10, 2019 X99 soc champ and one 5960x remaining. Link to comment Share on other sites More sharing options...
bigblock990 Posted April 16, 2019 Author Share Posted April 16, 2019 Bump. As said previously, open to reasonable offers. Link to comment Share on other sites More sharing options...
bigblock990 Posted May 3, 2019 Author Share Posted May 3, 2019 Bump Link to comment Share on other sites More sharing options...
bigblock990 Posted July 24, 2019 Author Share Posted July 24, 2019 Still available Link to comment Share on other sites More sharing options...
bigblock990 Posted January 28, 2020 Author Share Posted January 28, 2020 Close and move please Link to comment Share on other sites More sharing options...
Recommended Posts