Jump to content
HWBOT Community Forums

KaRtA - Ryzen 9 3900X @ 5752MHz - 6min 4sec 557ms SuperPi - 32M


robbo2
 Share

Recommended Posts

Thanks everyone.

It’s a really tricky one on this platform, as scaling just falls away very quickly. If it scaled correctly like my spreadsheets it should have been much faster, but after 5-5.2g it really takes a hit. This run was with 1.5s greater efficiency at 4ghz, but only 0.2s faster at full out.

 

I tried 4 dimms, but unfortunately The board either doesn’t like mixed PCB types, or I have a bad slot which is most likely the issue. I never had had much success with 4Dimms on this board, and the 1st and 3rd are difficult to get to boot even with 2 dimms. I don’t have any 16gb dimms so cannot test it. 

 

 

Link to comment
Share on other sites

On 8/25/2019 at 4:03 PM, KaRtA said:

I tried 4 dimms, but unfortunately The board either doesn’t like mixed PCB types, or I have a bad slot which is most likely the issue. I never had had much success with 4Dimms on this board, and the 1st and 3rd are difficult to get to boot even with 2 dimms. I don’t have any 16gb dimms so cannot test it. 

I hear ryzen has a much easier time with 4 sticks of micron rev e than 4 stick of bdie, so if you ran 4 sticks of bdie you may have a bad time.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...