Jump to content
HWBOT Community Forums
Mythical tech

Fighing condensation

Recommended Posts

How well would this work for fighting condensation for long cascade bench sessions. I know it wont remove all condensation but I have seen people do things like this before and am wondering if it works well.

no con.png

Share this post


Link to post
Share on other sites

what ever you use , the way to beat condensation is remove ambient air temp to the whatever is being used,

same as sealing  a socket , motherboard , pot or whatever 

Share this post


Link to post
Share on other sites

not worth it. $10 worth of artists eraser all you will need. Peel off and reuse when done. 

you wont want to sit next to a vacuum pump that's constantly running. also I think PSU should not be getting that cold or could have some issues.

Elmor did a nitrogen gas purge system at computex with the idea of little to no H in the system so no H2O can form. 

ic.jpg

Edited by Splave
  • Like 3

Share this post


Link to post
Share on other sites

@Splave I already have all the parts and I would only have to run the vacuum pump if the pressure got above the desired level, as for the psu I could put it outside of the vacuum chamber. 

Share this post


Link to post
Share on other sites

are you able to get into it easily  ? so as to reset cmos etc, if theres a boot failure, change gpu, cpu, ram etc

looks to me the toplate on the pot fits on top of the lid of the case, is that right ?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...