Jump to content
HWBOT Community Forums
Mythical tech

Mythical tech - Pentium E2180 @ 4580MHz - 17sec 656ms wPrime - 32m

Recommended Posts

@noxinite thank you for your help in binning the chips. Once I get my plasti dip and kpx in the mail I am going to do a real session with the rex and by second best chip. I am almost sure it will do 5+ ghz because it can do 3.74 at 1.42 volts in prime 95
  • Like 1

Share this post


Link to post
Share on other sites
9 hours ago, Mythical tech said:

@noxinite thank you for your help in binning the chips. Once I get my plasti dip and kpx in the mail I am going to do a real session with the rex and by second best chip. I am almost sure it will do 5+ ghz because it can do 3.74 at 1.42 volts in prime 95

That chip should easily do 5GHz if it scales :)  That beeing said, i have seen allendales that are about the same as that chip only do 4,8 and on the other hand my 5,2+GHz E4500 probbably only would do <3,4GHz with you criteria...

 

Allso moar volts :P

Share this post


Link to post
Share on other sites

@TAGG CPU temps were about +22 under wprime 32m I was using hy510 tim (the worst stuff I have ever used but it was free and the only stuff I had on hand) I just did a quick 2 min test and my number three chip did about 100mhz higher at the same temp and voltage but I am limited my temp and voltage. First time taking 775 sub zero so I think with practice I can get 10-20 more mhz at this temp and voltage.

Edited by Mythical tech

Share this post


Link to post
Share on other sites
11 minutes ago, Mythical tech said:

@TAGG CPU temps were about +22 under wprime 32m I was using hy510 tim (the worst stuff I have ever used but it was free and the only stuff I had on hand) I just did a quick 2 min test and my number three chip did about 100mhz higher at the same temp and voltage but I am limited my temp and voltage.

Ah, i see :D HY510 sucks, try GD900 if you want cheap paste for benching, i use it on evrything even on LN2 it's fine down to about -120°C.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...