superpatodonaldo Posted January 10, 2020 Share Posted January 10, 2020 no freq limitation for this division? Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted January 10, 2020 Crew Share Posted January 10, 2020 Not intended... If you all want I can put 4503mhz? Quote Link to comment Share on other sites More sharing options...
superpatodonaldo Posted January 10, 2020 Author Share Posted January 10, 2020 As you prefer...I just noticed this is the only division without freq limitation Quote Link to comment Share on other sites More sharing options...
MetalRacer Posted January 12, 2020 Share Posted January 12, 2020 Is x99 ok for this one? Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted January 12, 2020 Crew Share Posted January 12, 2020 No it's 2011 not 2011v3... No ddr4 here Quote Link to comment Share on other sites More sharing options...
Pirat Posted January 15, 2020 Share Posted January 15, 2020 this has probably been discussed before, but I want to make sure I understand this right. "Processor must be idle/load and at positive temperatures (HWinfo v6.+, OHM readout)" Positive temps as in +20*C ambient or can I put the radiator out the window where it's around 0*C and HWinfo would still show positive temps? Thank you. Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted January 15, 2020 Crew Share Posted January 15, 2020 if hwinfo gives positive temps it is accepted.... Quote Link to comment Share on other sites More sharing options...
Bullshooter Posted January 19, 2020 Share Posted January 19, 2020 If i can do idle with +1 degrees it is okay thats right? Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted January 19, 2020 Crew Share Posted January 19, 2020 yes it's a positive temp Frank Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted February 1, 2020 Crew Share Posted February 1, 2020 !!!!!Due to multiplier detection error , Open Hardware Monitor will no longer be allowed for future submissions. Frequency (and temperature) Monitoring via HWinfo32/64 and or Benchmate!!! Quote Link to comment Share on other sites More sharing options...
phantom.ololo Posted February 26, 2020 Share Posted February 26, 2020 Please add Asus P9D-X to DB. From my subs https://hwbot.org/submission/4364115 Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted March 5, 2020 Crew Share Posted March 5, 2020 On 2/26/2020 at 11:28 PM, phantom.ololo said: Please add Asus P9D-X to DB. From my subs https://hwbot.org/submission/4364115 added Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted March 8, 2020 Crew Share Posted March 8, 2020 All scores are moderated, putting up a bunch of posts at HWBot's Facebook page, if you see your setup pass by, plz tag !!! 1 Quote Link to comment Share on other sites More sharing options...
Goldguru Posted April 12, 2020 Share Posted April 12, 2020 New here. so an x5675 intel is OK but not a gtx950, is that correct? Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted April 12, 2020 Crew Share Posted April 12, 2020 yes sorry , for the old legacy patforms we also impose a GPU limitation, community opted to go for maximum a GTX770 for nVIDIA users Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted April 19, 2020 Crew Share Posted April 19, 2020 I see a lot of subs with HWinfo running, but not showing the info me and the rest of the moderators require You can adjust the looks of HWinfo by either pressing the configuration cogwheel tab or by a right mouse click (on the opened HWInfo) and selecting the layout settings This will after hiding a lot of HWBot invaluable information (in my case up to 227 settings hidden) result in a smaller HWInfo window Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.