Jump to content
HWBOT Community Forums

Recommended Posts

Posted (edited)
3 minutes ago, chispy said:

Thank you for the fast response my friend.  The one at the first page says it's for windows xp , does this ahci driver works for W7  also ? Intel usb ports are not working for me , giving me errors and just refuse to work. If you or anyone has any other alternate drivers please post them here , it will be greatly appreciate it . 

 

Kind Regards: Angelo

it shoots an issue after driver installation (and restart) if u dont have digital signature off.
Still needs to be tested but what might work is to disable secure boot in bios so you can disable dig signature in OS.
Might find to try this out tonight.

Edited by FireKillerGR
  • Like 1

Share this post


Link to post
Share on other sites
Posted (edited)
21 minutes ago, FireKillerGR said:

it shoots an issue after driver installation (and restart) if u dont have digital signature off.
Still needs to be tested but what might work is to disable secure boot in bios so you can disable dig signature in OS.
Might find to try this out tonight.

Finally the right Intel usb driver installed some entries + the correct driver for this usb ports 😁 and now all Intel usb ports are working flawlessly even after reboot and no need to disable driver signature anywhere ,  it just works , the answer is the drivers posted by @noizemaker

@FireKillerGR would you be so kind and update the drivers for W7 on the first page ? appreciate it all the help and work on this thread of yours , thank you .

 

Thank you so much guys , no more mambo jambo and jumping hoops , this driver installed flawlessly. I will test on xp later today and post feedback if it works :) , now i can sleep lol ... Angelo out !

 

 

ok.png

ok2.png

Edited by chispy
  • Like 3

Share this post


Link to post
Share on other sites
Posted (edited)

Anything other than PLL Termination that need to be set manually when using LN2 on water?  Still getting CPU over temperature errors with it set to 1.3 or even 1.2.

Edited by sabishiihito

Share this post


Link to post
Share on other sites

Have any of you guys run into this bug ?  Asus Turbo v freeze the whole pc if i boot with HT disable and only 2 cores active for me on w7 ( does not happens when all cores are active and HT On ). I'm doing some initial testing and tweaking but Turbo V app always has this bug for me ( it's no fun trying to boot 2 cores no HT at 6.1~6.2Ghz on SS at -52c ) . Does anyone knows how to make it work or a new version with a fix ? i'm using 1.10.07 the one posted here at the first page. Last year we had some similar bugs with Turbo V on Z390 Apex xi and Elmor stepped in and helped me a lot , he could replicate that bug , hence a new Asus Turbo V app. was released with bug fixes. Any ideas ?

 

Kind Regards: Angelo

Share this post


Link to post
Share on other sites
2 hours ago, chispy said:

Have any of you guys run into this bug ?  Asus Turbo v freeze the whole pc if i boot with HT disable and only 2 cores active for me on w7 ( does not happens when all cores are active and HT On ). I'm doing some initial testing and tweaking but Turbo V app always has this bug for me ( it's no fun trying to boot 2 cores no HT at 6.1~6.2Ghz on SS at -52c ) . Does anyone knows how to make it work or a new version with a fix ? i'm using 1.10.07 the one posted here at the first page. Last year we had some similar bugs with Turbo V on Z390 Apex xi and Elmor stepped in and helped me a lot , he could replicate that bug , hence a new Asus Turbo V app. was released with bug fixes. Any ideas ?

 

Kind Regards: Angelo

till confirmed (and fixed) u can try using this:
https://www.dropbox.com/s/1en7v8q11i14yx0/Ratio_Hotkey_with_V.zip?dl=0

hotkeys for multi + vcore

  • Like 1

Share this post


Link to post
Share on other sites

I can confirm that barbonenet acronis image for z390 from antome work on that board to. I used ps2 , just needed to install usd xp drivers

1593187162845-1.JPEG

  • Like 1

Share this post


Link to post
Share on other sites

Windows xp 32bit working fine over here for 2d :) , i used the iso posted by @FireKillerGR burned into a dvd and installed that way 100% fine as firahelper was giving me way too many issues and could not installed that way thru usb. I tried my best to get usb xp drivers of intel to make it work , sadly they do not work for me and a few guys also have the same problem , i was talking with @noizemaker  about it as he also have this same problems , xp intel usb drivers are not working for old z-390 xp installation or fresh install of xp , i did try everything but it was a no go at the end. I gave up and installed my old usb 3.0 pci express card wish installed fine since it has xp support and drivers. No problem then for me on xp since i use ps2 keyboard and mouse and usb 3.0 pci express card for pen drives and usb wi-fi module for internet.

 I have a question , has anyone managed to successfully install windows xp x64 bit and ran 3dmark 01 and can confirmed 01 is working on xp 64bit ? As in xp 32bit 3dmark01 does not work at all and it was confirmed already by 2 other members of my team that 3dmark01 does not work on xp 32bit and this platform :( , any ideas , help or guidance will be very welcome and appreciate it :).

 

Kind Regards: Angelo

Share this post


Link to post
Share on other sites

install via firadisk and ahci drivers works, then usb works with the z390 xp drivers.. i just cant get it to work with antome image :P

  • Like 2

Share this post


Link to post
Share on other sites

Seems like all the dropbox links from OP went 404? friend getting the same.

Share this post


Link to post
Share on other sites
5 hours ago, Tyllo said:

Seems like all the dropbox links from OP went 404? friend getting the same.

Work fine here

Share this post


Link to post
Share on other sites
12 minutes ago, FireKillerGR said:

Work fine here

 

Getting '404' also from here.

Location: Riverside, California.

Outage?

Share this post


Link to post
Share on other sites

hmm weird - it works from my main account but if I open it as incognito it gives me 404 (it didnt before); links are enabled and files are public.
Will try once again later today (tomorrow morning) and if they still dont work then I will reupload on gdrive

  • Like 1

Share this post


Link to post
Share on other sites

I'm having trouble getting into Win7.  All cases read a little of the OS to the point of entering Windows, then immediately reboot.

BIOS is 0069 with ucode - it will boot into WIN10 and run properly.

Attempts: 

Win7 sp3 image loaded onto nvme.  Includes z390 chipset driver, also includes the usb drivers provided my Noizemaker that run z390 usb in Win 7. (another thank you  to Noizemaker)

Win7 image with x299 chipset driver loaded on the nvme.

Win7 installation ISO on a USB drive

Legit retail Win7 installation CD connected through either PCH sata or asmedia sata port.

Any help?  What am I missing?

Share this post


Link to post
Share on other sites

Does anyone get cb at -160 after 3 session of ln2 ? I've done 3 session full pot no problems but now can't go full pot , have cb at -160 . I tried raise pll term up to 1.8 no luck.

  • Sad 2

Share this post


Link to post
Share on other sites
2 hours ago, shar00750 said:

Does anyone get cb at -160 after 3 session of ln2 ? I've done 3 session full pot no problems but now can't go full pot , have cb at -160 . I tried raise pll term up to 1.8 no luck.

Oh no's, cpu is cold scared now. I do not look forward to this  myself

Share this post


Link to post
Share on other sites

anyone want to try some daily mem presets? :)

https://drive.google.com/file/d/18Voa-zBpBVtlHFAMtxLH8cMeqxFpOGaO/view?usp=sharing

These have been verified so far by testing a couple bdie kits and few micron ones.

More kits to be tested but thought to share for any of you who might be interested.

Please note that each kit/imc etc will behave differently so you might need/want to fine-tune timings and voltages.

  • Like 3
  • Thanks 2

Share this post


Link to post
Share on other sites
On 7/4/2020 at 6:33 PM, shar00750 said:

Does anyone get cb at -160 after 3 session of ln2 ? I've done 3 session full pot no problems but now can't go full pot , have cb at -160 . I tried raise pll term up to 1.8 no luck.

So sorry to hear that bro :( , you are the 5th person i hear this problems occurs with comet lake cpus does not matter motherboard brand. Does anyone knows why this is happening ?

Also has anyone managed to install windows xp 64bit succesfully ? I can install xp 32bit and run 2d only if i use the chipset pci expressx16 running at 4x if i use any of the pci express lanes coming from the cpu 16x i get bsod , any idea if it needs another acpi. files or something ? or i'm just dreaming of running 3dmark01 on comet lake cpus ? I would kill 3 pink unicorns for running 01 on this platform 😁

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...