Jump to content
HWBOT Community Forums
TaPaKaH

TerraRaptor - Core 2 Duo E8200 @ 5104MHz - 8min 51sec 828ms SuperPi - 32M

Recommended Posts

No chance to make 2:3(266) or 5:8(333) to work? On some boards these (especially 5:8) seem much easier than other dividers.
  • Like 1

Share this post


Link to post
Share on other sites
2:3 posts but freezes after usb init, 5:8 works but requires 7-7-6. I will re-run with another cpu and fresh windows installation, hopefully will make runs with both a.m. dividers.

Share this post


Link to post
Share on other sites

Actually s266 2:3 direct boot @643 was doable before repair (SB swap) - I think I should just try different cpu, this one had issues starting from 625mhz on core0 and it is hard to tell cpu limit from potential issues with the board.

Share this post


Link to post
Share on other sites
Posted (edited)

Great work. You can more))))

Edited by GRIFF
  • Like 1

Share this post


Link to post
Share on other sites

I'm amazed that you can get any form of FSB reliability above 600 with Wolfdale on single stage. It seems that no matter what I do, the behavior is only stable for me when the CPU is on LN2.

Share this post


Link to post
Share on other sites
1 hour ago, TaPaKaH said:

I'm amazed that you can get any form of FSB reliability above 600 with Wolfdale on single stage. It seems that no matter what I do, the behavior is only stable for me when the CPU is on LN2.

Preach, I never could get the REX to behave nicely. Well I managed to get 634 2:3 32M working nice with PSC, but it seems harder with hypers and never consistent.

Share this post


Link to post
Share on other sites
Wow ! Very nice ! Strong ! Big grats !
  • Like 1

Share this post


Link to post
Share on other sites
@TaPaKaH what temps does your single stage do? On my single stage I can do 615mhz on most of my wolfdale chips but that is the limit of my p5e3

Share this post


Link to post
Share on other sites
10 hours ago, sale_quiche said:

Nice mem wow

Fake clock in cpuz, it is strap 400 2:3 being detected like this.

7 hours ago, TaPaKaH said:

I'm amazed that you can get any form of FSB reliability above 600 with Wolfdale on single stage.

For me, it is more about cpu/nb skews (>600 should be smth like 300/0, >625 300/100, >640 400/100) and gtl settings. This one was binned out of 4 samples, 3 are consistent @625mhz, 1 is failing even at 600. 

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...