Jump to content
HWBOT Community Forums

Asrock x570 Taichi need bios bug fixes support. Need a correctly working Bios for extreme overclocking help.


Recommended Posts

Guys there is a few bugs on the latest Beta bios 3.62 released 11/11/2020 ( Enhance AMD Ryzen 5000 CPU performance )

Bug # 1 - Cannot use more voltage for v.mem higher than 1.82v , system will go dark screen mode and freeze until clear cmos ( i need at least 1.985v. for extreme overclocking in subsero temps.)

Bug # 2 - Bios won't allow IF ratio properly if memory is overclock higher than 3800Mhz it will revert back to stock settings , IF/Memory ratio is completely broken and memory won't do more than 3800Mhz due to this bug.

Bug # 3 - A lot less cpu performance than other boards on the cpu when compared to other motherboards.

Bug # 4 - Asrock motherboard utility for overclocking is broken and cannot change cpu multiplier inside windows.

@Splave , @mllrkllr88 , @NickShih can you guys help this bugs fix on the Bios for Taichi x570 , maybe forward this info to the Bios team please , we need a fix for this bugs as it is essential for this mobo in order to be competitive with other motherboard vendors. I will appreciate any help and guidance on this deal breaker bugs , i can be Beta tester if you need me. Thank you in advance.

 

 



Kind Regards: Chispy

( tested on ASrock x570 taichi Bios 3.62 - Rysen 5600x - 2x8gb G.skill Trident Z Neo 3800Mhz cas 14 A2 ram and 32gb G.skill Flare X 3200Mhz cas 12 A0 ram. )

CINEBENCH_R15_CPU_2261.jpg

gb3-2.png

Edited by chispy
  • Like 1
Link to post
Share on other sites
2 hours ago, Splave said:

IF is not NB in cpuz, that is uclock. Check it in ryzen master.  Also use ryzen master for multi the tools don't work besides bclk and vcore. 

 

Can try this bios

 https://drive.google.com/file/d/1Y6R-Qbn67cxl2kqYMjPfGUKJvD__OEd3/view?usp=drivesdk

 

 

Thank you Allen for the help , downloading now to test it right away. I will give you feedback in a little bit.  Appreciate it the quick response and help.

 

Kind Regards: Angelo

Link to post
Share on other sites

@Splave , Allen thank you so much 👍 , indeed it was the Bios 3.62 bugs. The bios that you posted for me it is absolutely insane in performance and it works like a charm , this board is very good i like it a lot now with this Bios 😁 . Mem at 4522Mhz running like a dream with super tight timings upped the cpu performance a lot. I think 4600+ Mhz is doable on this board got to test it some more. Appreciate it all the help , also thank you for  the tip to use Ryzen master for changing multipliers in windows , it is working as it should. Mobo is a good candidate for Ln2 , very capable me thinks.

 here is one cbr15 done at 5250Mhz -  5600x on ss with mem at 4522Mhz Cas14 super tight. Not my best score but just shows how good this board is with this Bios.

 

 

 

CINEBENCH_R15_CPU_2312.jpg

Edited by chispy
  • Like 2
Link to post
Share on other sites

Thank you @Splave . Allen there is a new Beta bios for x570 Taichi :)  Beta 3.66 released today , support d.ram voltage over 1.8v . A lot of people are very interested on this board bro , the ocn support page is very active - https://www.overclock.net/threads/official-asrock-x570-overclocking-and-support-thread.1730162/page-43#post-28674690

  Will try this new Bios 3.66 and report back my findings. Awesome support from Asrock releasing quick bug fixes and new Bios improvements really fast. Got to love when a company listen to it's customer 👍 .

http://www.asrock.com/mb/AMD/X570 Taichi/#BIOS

 

With Beta bios 3.58 i was able to run 4600 cas14-13 flawlessly when tweaked right , but limited to 1.8v on ram. I tried to stabilize 4666 but was a no go as i think my ram needs more volts for that speed. will try to 4666Mhz with more volts on ram to see if it helps. Good times ahead :D

Edited by chispy
Link to post
Share on other sites
On 11/20/2020 at 6:33 AM, chispy said:

Thank you @Splave . Allen there is a new Beta bios for x570 Taichi :)  Beta 3.66 released today , support d.ram voltage over 1.8v . A lot of people are very interested on this board bro , the ocn support page is very active - https://www.overclock.net/threads/official-asrock-x570-overclocking-and-support-thread.1730162/page-43#post-28674690

  Will try this new Bios 3.66 and report back my findings. Awesome support from Asrock releasing quick bug fixes and new Bios improvements really fast. Got to love when a company listen to it's customer 👍 .

http://www.asrock.com/mb/AMD/X570 Taichi/#BIOS

 

With Beta bios 3.58 i was able to run 4600 cas14-13 flawlessly when tweaked right , but limited to 1.8v on ram. I tried to stabilize 4666 but was a no go as i think my ram needs more volts for that speed. will try to 4666Mhz with more volts on ram to see if it helps. Good times ahead :D

Yes after the vdimm patch you will need more vdimm for the same speed. I think the 1.8 limit bios overshot a bit and the patched over 1.8 bios undershoots a bit. 

Link to post
Share on other sites
On 11/20/2020 at 6:55 AM, insanefugitive said:

Before run 3733 ram  and now not boot with beta bios 3.66 im so sad

I haven't tried this bios bit if you don't need vdimm over 1.8 I would just use the beta posted in this thread

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...