bscool Posted April 14, 2022 Share Posted April 14, 2022 (edited) Strix d4 bios 1404 4266c16 DR b die 901 is still better for me as I can run 4266c15-16-16 But with KS this is the best bios so far for DR b die. CPU at Asus defaults for this run. Edited April 14, 2022 by bscool 1 Quote Link to comment Share on other sites More sharing options...
uraganX Posted April 16, 2022 Share Posted April 16, 2022 On 4/14/2022 at 8:21 AM, bscool said: Strix d4 bios 1404 4266c16 DR b die 901 is still better for me as I can run 4266c15-16-16 But with KS this is the best bios so far for DR b die. CPU at Asus defaults for this run. Any SR info with 1404 ? Quote Link to comment Share on other sites More sharing options...
bscool Posted April 16, 2022 Share Posted April 16, 2022 (edited) 3 hours ago, uraganX said: Any SR info with 1404 ? I havent tested it with SR or seen any feedback. I would think it would still be good with SR but havent tested it. Edited April 16, 2022 by bscool Quote Link to comment Share on other sites More sharing options...
Broken APEX49 Posted April 17, 2022 Share Posted April 17, 2022 Hello everyone. I just bought a 12900KS myself! By the way, what is the best BIOS? Quote Link to comment Share on other sites More sharing options...
uraganX Posted April 20, 2022 Share Posted April 20, 2022 On 4/14/2022 at 8:21 AM, bscool said: Strix d4 bios 1404 4266c16 DR b die 901 is still better for me as I can run 4266c15-16-16 But with KS this is the best bios so far for DR b die. CPU at Asus defaults for this run. On SR 4000cl14 b-die A2 pcb I can't even get as much as you on DR. Tested with bios 003, 901, 1303, 1304. vddq 1.5-1.55v sa 1.45v I can't get more than 4000 MHz on two sticks. If I set the dram voltage to 1.8v, then it turns out to take 4100 cl 14. Or with one bar on slot B2 4133cl 15 to 1.8v at a memory temperature of about 16 degrees. Still earned 3800 cl 12 at 1.8v and 4000 cl 13 at 1.7v. 1 Quote Link to comment Share on other sites More sharing options...
Matusalem Posted April 26, 2022 Share Posted April 26, 2022 On 14/04/2022 at 17:21, bscool said: Strix d4 bios 1404 4266c16 DR b matrice 901 est toujours mieux pour moi car je peux exécuter 4266c15-16-16 Mais avec KS, c'est le meilleur bios à ce jour pour DR b die. CPU aux valeurs par défaut d'Asus pour cette exécution. Hi ! it's your daily profil ? Can you share the .cmo please ? Quote Link to comment Share on other sites More sharing options...
bscool Posted April 26, 2022 Share Posted April 26, 2022 (edited) 6 hours ago, Matusalem said: Hi! it's your daily profile? Can you share the .cmo please? Here is the cmo. cpu is at default. https://1drv.ms/u/s!Alekwwtstb8wlOJOPvNz6ssFJv7XqQ?e=Avf6LJ I usually set static vcore and p,e and cache for daily. Unless you have really good sticks you will probably need to bump dram to 1.563 or higher to run 4266 or lower ram clock to 4133c15-15-15. Edit I noticed I had tras set to 16 in that cmo. It will probably be easier to boot and get stable at 30 to 36. Edited April 27, 2022 by bscool 1 Quote Link to comment Share on other sites More sharing options...
Matusalem Posted April 26, 2022 Share Posted April 26, 2022 59 minutes ago, bscool said: Here is the cmo. cpu is at default. https://1drv.ms/u/s!Alekwwtstb8wlOJOPvNz6ssFJv7XqQ?e=Avf6LJ I usually set static vcore and p,e and cache for daily. Unless you have really good sticks you will probably need to bump dram to 1.563 or higher to run 4266 or lower ram clock to 4133c15-15-15. Yes 4133c15-15-15. for me at 1.564 with my Galax Oc Lab DR, but i just bought a KS and i will try it soon with the CPU Contact Frame by Thermal Grizzly, I hope to have a good imc on this cpu, i really want to run a profile like yours. Thank's 1 Quote Link to comment Share on other sites More sharing options...
Broken APEX49 Posted May 1, 2022 Share Posted May 1, 2022 BIOS1404 cannot be changed to CR1, can it? Is it just me? Quote Link to comment Share on other sites More sharing options...
Matusalem Posted July 16, 2022 Share Posted July 16, 2022 @cool Hey! Have you tested the latest bios on your KS? Quote Link to comment Share on other sites More sharing options...
bscool Posted July 17, 2022 Share Posted July 17, 2022 (edited) 3 hours ago, Matusalem said: @cool Hey! Have you tested the latest bios on your KS? No I havent. Need to put it back in and try it had it in Apex. Edited July 17, 2022 by bscool Quote Link to comment Share on other sites More sharing options...
Matusalem Posted July 17, 2022 Share Posted July 17, 2022 2 hours ago, bscool said: Non je n'ai pas. Besoin de le remettre et de l'essayer dans Apex. oh okay DDR5 Apex, are you done with strix D4? Quote Link to comment Share on other sites More sharing options...
bscool Posted July 17, 2022 Share Posted July 17, 2022 (edited) 1 hour ago, Matusalem said: oh okay DDR5 Apex, are you done with strix D4? No I have both 2 Apex(2021 and 2022) and Strix d4. I have 3 cpus I switch out to compared IMCs. Strix d4 currently has 12900kf in it. Edited July 17, 2022 by bscool 1 Quote Link to comment Share on other sites More sharing options...
Matusalem Posted July 18, 2022 Share Posted July 18, 2022 Oh nice, i'm still looking for a good bin DDR4 DR like yours but hard to find it 1 Quote Link to comment Share on other sites More sharing options...
Splave Posted August 7, 2022 Share Posted August 7, 2022 amazing mobo when you get the hang of it. 1504 is great with dual rank 1.75vDimm 1.45vSA 1.55vDDQ Be sure to enable round trip latency in the mem algorithm page, it fixed my rtl at higher clocks from 71/79 to 71/71. 14/13/13/36/2t/12/374/0/6/4/7/3/8/23/13 65535/6/7/4/7/7/12/12/12/12/24/20/7/7/7/4/9/9 71/71 worked well for me in pi at 43-4350mhz 4400mhz would train but not end the OS unfortunately. Tightening tras and trfc was worse here. 4 2 Quote Link to comment Share on other sites More sharing options...
l0ud_sil3nc3 Posted August 8, 2022 Share Posted August 8, 2022 On 8/7/2022 at 11:46 AM, Splave said: amazing mobo when you get the hang of it. 1504 is great with dual rank 1.75vDimm 1.45vSA 1.55vDDQ Be sure to enable round trip latency in the mem algorithm page, it fixed my rtl at higher clocks from 71/79 to 71/71. 14/13/13/36/2t/12/374/0/6/4/7/3/8/23/13 65535/6/7/4/7/7/12/12/12/12/24/20/7/7/7/4/9/9 71/71 worked well for me in pi at 43-4350mhz 4400mhz would train but not end the OS unfortunately. Tightening tras and trfc was worse here. Could not agree more, probably going to go down as one of the last great DDR4 mobo's. UEFI navigation still trips me up and I wish the thirds would follow an order I'm more used to (Asrtc) but other than that smooth experience and thanks for the awesome bios support @shamino and @safedisk. Quote Link to comment Share on other sites More sharing options...
bscool Posted October 24, 2022 Share Posted October 24, 2022 (edited) ME firmware 16.1.25.1917 https://rog.asus.com/forum/showthread.php?126385-FIRMWARE-Intel-ME-(H610-B660-H670-Z690-B760-H770-Z790) 2103 is best bios so far for me with DR b die and 12900ks. 43000c15 ran 2.5b y cruncher. Edited October 24, 2022 by bscool 2 Quote Link to comment Share on other sites More sharing options...
bscool Posted October 26, 2022 Share Posted October 26, 2022 (edited) Posting in case anyone else runs into this issue on Strix d4 with 13th gen. I had 12900ks installed flashed from 1601 to 2103 and it was like I had a really bad IMC gear 1 after installing 13900k, it would not be stable for memtest or y cruncher. Current ME firmware(1917) was installed before installing 13900k So I flashed back to bios 2004 and then to 2103 and now it is stable in gear 1 4300 with DR b die. Just wanted to let anyone know if having issues on Strix d4 try that. Edit used Ezflash for flashing for info Edited October 26, 2022 by bscool 1 Quote Link to comment Share on other sites More sharing options...
bscool Posted October 31, 2022 Share Posted October 31, 2022 I ended up testing more and what a difference manually setting tCWL(lower than tCL) makes . Still need to test more but went from difficult to excellent memory OC experience with 13th gen. I was use to leaving tCWL on auto when OCing mem on 12th gen. 4300c15-15-15 1.35sa/vddq. CPU at Asus default for voltages and clocks. 1 Quote Link to comment Share on other sites More sharing options...
Titane Posted November 23, 2022 Share Posted November 23, 2022 Can you make 4000 g1 c12 with rpl ? 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.