unityofsaints Posted January 28, 2022 Share Posted January 28, 2022 FYI biscuits will show "out of range", need to set 49x P-core multi to get a value there. 1 Quote Link to comment Share on other sites More sharing options...
Motley Crue Posted January 29, 2022 Share Posted January 29, 2022 Intel 12500 max cpu multi is only 46.No biscuits for me. X2i. Appears multi bug.Locks in at 41 while previously working any range. Quote Link to comment Share on other sites More sharing options...
sergmann Posted January 29, 2022 Author Share Posted January 29, 2022 this bios have some bugs. Let me test new one 1 Quote Link to comment Share on other sites More sharing options...
Motley Crue Posted February 5, 2022 Share Posted February 5, 2022 New X bios?❤️ X2i.Ddr5 extreme mode works great on Hynix with tighten rtl. Gigabyte keeps improving?. Quote Link to comment Share on other sites More sharing options...
sergmann Posted February 12, 2022 Author Share Posted February 12, 2022 X3b Bios in the first post uploaded. Please note, GTL tool only works for multi and cache! As soon as a new version is available, it will be available in the first post. 2 Quote Link to comment Share on other sites More sharing options...
Motley Crue Posted February 13, 2022 Share Posted February 13, 2022 Thanks Sergmann.? All day trying X2i with G7400 and it is painful. 1 Quote Link to comment Share on other sites More sharing options...
skullbringer Posted February 13, 2022 Share Posted February 13, 2022 I think radio buttons are also buggy with this bios version, you can go up bclk with +, but not down with - in Germany we call this an Einbahnstraße 1 Quote Link to comment Share on other sites More sharing options...
Motley Crue Posted February 13, 2022 Share Posted February 13, 2022 (edited) In states we call it a bitch?. X3b.Same - button issue.Used MCU 0X09 to unlock g7400 after some time trying?. So far upon windows restart.Multi bug not showing.Settings holding unlike before. Progress.Thanks for bios. Edited February 13, 2022 by Motley Crue 1 Quote Link to comment Share on other sites More sharing options...
sergmann Posted February 13, 2022 Author Share Posted February 13, 2022 Don’t have any problems with X3b and G7400/G7400T/12100F/12300. Sometimes are lower voltages better ? 1 Quote Link to comment Share on other sites More sharing options...
unityofsaints Posted February 14, 2022 Share Posted February 14, 2022 15 hours ago, skullbringer said: I think radio buttons are also buggy with this bios version, you can go up bclk with +, but not down with - in Germany we call this an Einbahnstraße Haha yes that's a good word for it. I confirm I also have this issue. Quote Link to comment Share on other sites More sharing options...
sergmann Posted February 14, 2022 Author Share Posted February 14, 2022 Will testing today later, but usually I start with lower BCLK and go up in OS and don’t down ?. for example start with 180 BCLK and goes up to 190. from 190 I can go down but not tested to go under 180 Quote Link to comment Share on other sites More sharing options...
skullbringer Posted February 14, 2022 Share Posted February 14, 2022 10 minutes ago, sergmann said: Will testing today later, but usually I start with lower BCLK and go up in OS and don’t down ?. for example start with 180 BCLK and goes up to 190. from 190 I can go down but not tested to go under 180 you also can't set it down via gtl, though you can set it up. sure, you don't need bclk minus often, but when you needed it's usually in a situation where it's really annoying if it doesn't work Quote Link to comment Share on other sites More sharing options...
Motley Crue Posted February 14, 2022 Share Posted February 14, 2022 (edited) Not much luck with X3b.Operator error……..?Back on X2i. Bios X3b.What is bios MCU setting?Only option working for me 0X09. Congrats on WR sergmann. Tachyon dominating early non k results.Leave my obscure results unchallenged?. https://hwbot.org/newsflash/5367_intels_pentium_gold_g7400_lives_up_to_its_name_absolute_gold/ Edit MCU https://forum.phala.network/t/topic/2565 Edited February 14, 2022 by Motley Crue 1 Quote Link to comment Share on other sites More sharing options...
sergmann Posted February 14, 2022 Author Share Posted February 14, 2022 I don’t know what you guys do different ? 1 Quote Link to comment Share on other sites More sharing options...
Motley Crue Posted February 15, 2022 Share Posted February 15, 2022 Operator error confirmed X3b. Not sure I have bios correct.Set cpu multiplier in 3 places instead of 2 like previous bios.But it’s working. ddr extreme mode higher latency clock for clock compared to X2i Hynix? Quote Link to comment Share on other sites More sharing options...
sergmann Posted February 15, 2022 Author Share Posted February 15, 2022 Send me your profile, I’ll check it and adjust it for if it’s necessary 1 Quote Link to comment Share on other sites More sharing options...
Motley Crue Posted February 17, 2022 Share Posted February 17, 2022 Is Intel G6900 supported in X3b?MCU 0X09 in use. Extremely poor OC on G6900.5100mhz. Quote Link to comment Share on other sites More sharing options...
sergmann Posted February 17, 2022 Author Share Posted February 17, 2022 Not tested it. You can try different MCU‘s Quote Link to comment Share on other sites More sharing options...
Motley Crue Posted February 17, 2022 Share Posted February 17, 2022 Think G6900 sample is poor silicone.Atleast it’s not as bad as a G7400 I’ve seen 5000?. Quote Link to comment Share on other sites More sharing options...
Vertex_FR Posted February 22, 2022 Share Posted February 22, 2022 someone have tested XP on Tachyon ? I have 7B BSOD with my Z590 backup. (SATA drivers i guess) also tryed to clean install and still 7B error. drivers id used : 43D2 Quote Link to comment Share on other sites More sharing options...
d0minat0r Posted February 23, 2022 Share Posted February 23, 2022 YOu need new ahci for z690 Quote Link to comment Share on other sites More sharing options...
Vertex_FR Posted February 24, 2022 Share Posted February 24, 2022 17 hours ago, d0minat0r said: YOu need new ahci for z690 that what i've expected, I have the Z590 AHCI for XP and the usb3.0 driver for win 7 (also working on z690). If someone have the ahci driver for xp 32, please PM me. I will make an ISO for it + backup Quote Link to comment Share on other sites More sharing options...
d0minat0r Posted February 24, 2022 Share Posted February 24, 2022 Try my image from Z690 strix thred and do not forget to use AS media sata ports Quote Link to comment Share on other sites More sharing options...
Vertex_FR Posted February 24, 2022 Share Posted February 24, 2022 27 minutes ago, d0minat0r said: Try my image from Z690 strix thred and do not forget to use AS media sata ports Tachyon doesn't have asmedia sata controler, I will ask for a modded intel AHCI driver like i did for Z590 Quote Link to comment Share on other sites More sharing options...
sergmann Posted February 24, 2022 Author Share Posted February 24, 2022 Try to replace your files from driver folder with these files. For me it works without any issues https://drive.google.com/file/d/1rN6klLnvIjjsyCFTzk-zeJU-Tus5w39u/view?usp=sharinghttps://drive.google.com/file/d/1rN6klLnvIjjsyCFTzk-zeJU-Tus5w39u/view?usp=sharing Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.