Jump to content
HWBOT Community Forums

GIGABYTE Z690 Tachyon


sergmann
 Share

Recommended Posts

23 hours ago, Pharitthanun said:

I use x3i bios but i can't unlock DRam volt (Renesas PMIC) over 1435mV


What should I do or anyone have unlock bios, please help me.


Many thanks

Can`t confirm it, with x3i I can change voltages vor PMIC and Mem

Link to comment
Share on other sites

hi i am a good at hardware and old user very good understanding of overclocking ... using pc since 386sx and overclocking since athlon 2500+ 

also  have 12400f and gigabyte tachyon z690 + kingston ddr5 6000 ddr5 rams

6800 cas 32 i have no problem 

but i cant overclock my cpu i tried x2d x3i x3k bioses when my BCLK over 103 i got 0x9 Q code .. i tried many cpu ratios and lowered ram freq like 4000mhz s i have no progress .. my aio pump failed so i am using stock fan but cpu dont go over 65 even on cinebench.. what am i missing ... 

Link to comment
Share on other sites

Posted (edited)
41 minutes ago, eczanet said:

hi i am a good at hardware and old user very good understanding of overclocking ... using pc since 386sx and overclocking since athlon 2500+ 

also  have 12400f and gigabyte tachyon z690 + kingston ddr5 6000 ddr5 rams

6800 cas 32 i have no problem 

but i cant overclock my cpu i tried x2d x3i x3k bioses when my BCLK over 103 i got 0x9 Q code .. i tried many cpu ratios and lowered ram freq like 4000mhz s i have no progress .. my aio pump failed so i am using stock fan but cpu dont go over 65 even on cinebench.. what am i missing ... 

Hi there, for non-K OC please choose 0x09 microcode on main bios section

Edited by ivaneza
  • Like 1
  • Thanks 1
Link to comment
Share on other sites

11 hours ago, ivaneza said:

Hi there, for non-K OC please choose 0x09 microcode on main bios section

thnx for help .. it does not work 0x09 but on 0x0D  .. when go up to 5ghz cpu got 100 celcius degree (stock fan )so i already ordered nzxt x63 i think i can keep my cpu under 70 degree when 5ghz  .. 

Link to comment
Share on other sites

7 hours ago, eczanet said:

thnx for help .. it does not work 0x09 but on 0x0D  .. when go up to 5ghz cpu got 100 celcius degree (stock fan )so i already ordered nzxt x63 i think i can keep my cpu under 70 degree when 5ghz  .. 

Oh, sorry you have 12400F, tought it was 12100F.. of course X63 will do the job for 12400F

Link to comment
Share on other sites

  • 3 weeks later...
On 5/15/2022 at 11:19 AM, Pharitthanun said:

I use x3i bios but i can't unlock DRam volt (Renesas PMIC) over 1435mV


What should I do or anyone have unlock bios, please help me.


Many thanks

Same here, green sticks HMCG78MEBUA081N with Renesas PMIC. MB can not set more than 1.425

Tried x3b, x3c and x3k BIOSes

Link to comment
Share on other sites

  • 1 month later...

Hi guys...

i'm having some issues with my config :  12600K and G7400 with new TACHYON ;  DDR5 are KINGSTON FURY BEAST 6000 CL40 2x8GB ....My problem is error Ad on debug .....and i can't use QFLASH+ function ...Why ?  Wat is wrong ?

Thanks 

Link to comment
Share on other sites

can you start your system to flash new bios or is it not possible?

If you can`t start it, take FAT32 USB drive, put X3i bios on it and rename it in gigabyte.bin.

Put usb-drive in the red USB-Port near LAN port and press QFLASH-Button, after it all two bios chips are flashed.

Link to comment
Share on other sites

  • 2 weeks later...

Hi Sergmann, 

i solved issues with flash the bios finallly. I put X3i but i can’t oc with bclk and G7400. Over 103 mboard stop to 54 debug error.

Any advises ? Can you share me bios setting with ddr5 frequency to 6ghz ? 
 

Thanks a lot 

Link to comment
Share on other sites

26 minutes ago, sergmann said:

For non k CPU’s and BCLK OC you need the right microcode, I would try it with 0x09 😉

Thanks, tomorrow i would try! 
 

Any question :

ddr ram divisor if i set 6000 in frequency, would set automatically if i raise bclk ?  Error 54 seems ram issues for me 

Link to comment
Share on other sites

Posted (edited)
6 hours ago, Andreat85 said:

Thanks, tomorrow i would try! 
 

Any question :

ddr ram divisor if i set 6000 in frequency, would set automatically if i raise bclk ?  Error 54 seems ram issues for me 

Of course 

 

for BCLK benching, set Mem @4k for example and test bclk

Edited by sergmann
  • Like 1
  • Thanks 1
Link to comment
Share on other sites

Hi Gents.

How do I set up the + and - ratio/bclk button on the board.

AFAIK you should be able to gice those buttons different tasks ie

Ratio up or down 

Or

Bclk up or down

 

Thanks in advance

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...