johnamd Posted April 7, 2011 Share Posted April 7, 2011 i can use 2 cpu , one for sp32 and one for cpuz? Quote Link to comment Share on other sites More sharing options...
LeGaL^CriMeR Posted April 14, 2011 Share Posted April 14, 2011 Again lying. OC Genie clock my processor i7 860 of 2530.0MHz -> 3788.5MHz: +49.74% And if it is the result yamahar1 - 2530.0MHz -> 3932.3MHz: +55.42%: This is impossible, in the same motherboards and processors. Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted April 14, 2011 Author Share Posted April 14, 2011 It's not cheating, when the i7 860 has been added to the database, his default clock has been set to 2.5 GHz and in fact it's 2.8GHz, when this will be changed, then it will be OK. Ho and btw : http://www.facebook.com/MSIHQFANCLUB/posts/148932271840121 Quote Link to comment Share on other sites More sharing options...
Massman Posted April 14, 2011 Share Posted April 14, 2011 I'll look into it! Quote Link to comment Share on other sites More sharing options...
LeGaL^CriMeR Posted April 14, 2011 Share Posted April 14, 2011 Leaving a party error in initializing the processor. I speak specifically for overclocking which is achieved with ocgenie, how much different from mine in the same machines. Quote Link to comment Share on other sites More sharing options...
Massman Posted April 14, 2011 Share Posted April 14, 2011 I report the results of >> yamahar1On the video, CPU after pressing OC GENIE is 210x18 = 3780Mhz. And once in windows is clearly visible on the CPU-Z 217x18 = 3914mhz Man entered during loading of windows used BCLK buttons on the board. This should be a violation of the rules. Hm. In the CPU-Z video I clearly see 218x18 boot http://hwbot.org/community/submission/2155285_yamahar1_cpu_z_core_i7_860_3932.3_mhz Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted April 14, 2011 Author Share Posted April 14, 2011 I see 218x18 too on the POST Quote Link to comment Share on other sites More sharing options...
Massman Posted April 14, 2011 Share Posted April 14, 2011 Christian - nice video, but not at all valid for the competition ... ^^ Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted April 14, 2011 Author Share Posted April 14, 2011 Not for the comp But for the ''MSI Fan Club Voting Contest '' I need vote guys come on Quote Link to comment Share on other sites More sharing options...
Crew Turrican Posted April 14, 2011 Crew Share Posted April 14, 2011 nice video. Quote Link to comment Share on other sites More sharing options...
LeGaL^CriMeR Posted April 14, 2011 Share Posted April 14, 2011 Do not look post screen, OCgenie where is blck option buttons work, so after pressing the button, people can immediately press the + (plus) and overclocking the CPU Dock reach the post screen I say it is impossible for the same processor and motherboard, then pressing the OC Genie are overclocking differently. Quote Link to comment Share on other sites More sharing options...
Massman Posted April 14, 2011 Share Posted April 14, 2011 On my Xpower board, the BCLK buttons were disabled with OC Genie I think. Are you sure pressing the BCLK buttons before POST screen will increase value? There are quite some differences between the two setups, by the way. Different BIOS, different memory divider. Quote Link to comment Share on other sites More sharing options...
johnamd Posted April 14, 2011 Share Posted April 14, 2011 hello massman,i can use 2 cpu different, one for sp32 and one for cpuz?(with two video different) help please. Quote Link to comment Share on other sites More sharing options...
johnamd Posted April 17, 2011 Share Posted April 17, 2011 my friend oc genie when you have got multipler 25 you can use bios (super unlock technology)Then lock bclk 155 and multipler 25 .you use untiliti (msi control center)in from windows .be out Specific Rules look at this http://hwbot.org/article/news/rules_competition_59 too you have got wrong video look at this .i 'm sorry .too when you do reboot at black monitor under left there isn't yellow oc genie. please delete submission it. Quote Link to comment Share on other sites More sharing options...
Massman Posted April 17, 2011 Share Posted April 17, 2011 my friend oc genie when you have got multipler 25 you can use bios (super unlock technology)Then lock bclk 155 and multipler 25 .you use untiliti (msi control center)in from windows .be out Specific Rules look at this http://hwbot.org/article/news/rules_competition_59 too you have got wrong video look at this .i 'm sorry .too when you do reboot at black monitor under left there isn't yellow oc genie. please delete submission it. Can you please post your message in Greeek? The translator is making it very difficult to understand the message. Quote Link to comment Share on other sites More sharing options...
George_o/c Posted April 17, 2011 Share Posted April 17, 2011 I can translate it then Quote Link to comment Share on other sites More sharing options...
johnamd Posted April 17, 2011 Share Posted April 17, 2011 φιλε μου oc genie οταν εχεις πολαπλασιαστη 25 τοτε χρισημοποιεις τη λειτουργια στο bios super unlock technology ,τοτε αυτη η λειτουργια κλειδωνει το bclk σε 155 και το mult σε 25 . εσυ χρισειμοποιεις το utilitis (control center) μεσα απο τα windows , αυτο ειναι παραβιαση τον κανονων . επισης οταν κανεις reboot δεν εμφανιζεται στην οθονει η λειτουργια oc genie μρ κιτρινα γραματα. ειναι εκτος κανονων. ευχαριστω Quote Link to comment Share on other sites More sharing options...
johnamd Posted April 17, 2011 Share Posted April 17, 2011 The member oc genie is out of rules because he use utilities (control center by MSI). if use 875k the bios unlock selection super unlock technology. and lock the multiplier 25 and bclk 155. the member with control center upgrade bclk 155=>178. and restart the system. after we can't see the yellow worlds oc genie. Thank you!!! Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted April 18, 2011 Author Share Posted April 18, 2011 (edited) Sooooo, both of you guys have not a valid video First: yamahar1's video is wrong, why ? No Clear CMOS Explanation: 0:21 we clearly see that the ''OS Speed'' and ''CPU Speed'' is 219x18 He hasn't cleared the CMOS, then he saved settings reboot and push the OC Genie Button after. Ok there is the OC Genie Logo but I don't think it worked on that way because ''OS Speed'' and ''CPU Speed'' are again both 219x18 @ 0:42 Now Regarding OcGenie's video: He hasn't cleared the CMOS too 1:39 => we have ''CPU Speed'' 178x22 and ''OS Speed'' 178x25 WTF ? Anyway, you guys have to Clear the CMOS before pushing the OC Genie Button and have to clearly show it on the video like here: It's not that hard to do it step by step. Clear CMOS => start the board => disable Logo => push OC Genie Button => press F10 and Enter...... Do not forgot to change IDE/AHCI for your Hard Drive EDIT: Instead of Clear CMOS, you can also ''Load Default settings'' or ''Optimised Settings'' on the BIOS as far as I know, and then follow the steps Edited April 18, 2011 by Christian Ney Quote Link to comment Share on other sites More sharing options...
Massman Posted April 19, 2011 Share Posted April 19, 2011 Looking into this issue with MSI at the moment. One thing is very clear: OC Genie must be setting the overclock, not the user. So, it's not ok to press it during post and just have the message (OC Genie didn't set the overclock) or already press the button and then do manual OC afterwards. Quote Link to comment Share on other sites More sharing options...
Massman Posted April 19, 2011 Share Posted April 19, 2011 (edited) Yamahar1's result is not valid: manual OC is not allowed and OC Genie did not set the overclock. http://hwbot.org/community/submission/2155831_yamahar1_cpu_z_core_i7_860_3950_mhz http://hwbot.org/community/submission/2155833_yamahar1_superpi_32m_core_i7_860_9min_37sec_140ms In these two submissions we don't see OC Genie button being pressed -> OC Genie doesn't set overclock. http://hwbot.org/community/submission/2155285_yamahar1_cpu_z_core_i7_860_3932.3_mhz http://hwbot.org/community/submission/2155287_yamahar1_superpi_32m_core_i7_860_9min_48sec_963ms Edited April 19, 2011 by Massman Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted April 19, 2011 Author Share Posted April 19, 2011 I deserve a prize for my investigation Quote Link to comment Share on other sites More sharing options...
Massman Posted April 19, 2011 Share Posted April 19, 2011 Quote Link to comment Share on other sites More sharing options...
yamahar1 Posted April 19, 2011 Share Posted April 19, 2011 my result is not valid. ok !!! can you see the utility (control center) on the screen shot oc genie? run this utility down -left . utility is on the rules? Quote Link to comment Share on other sites More sharing options...
Massman Posted April 19, 2011 Share Posted April 19, 2011 OC Genie did not set the overclocked settings, so you set them manually (which is against the rules). The have OC Genie overclock your system, you must: - shut down your system - press OC Genie - power up system Pressing OC Genie button after boot does not activate it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.