November 1, 20241 yr New platform arrived, here's some initial testing with some G.Skill CK 9466 next gen goodness. G4 looking pretty good and much easier to run over 9000 than G2. All testing done with air cooling no cold testing yet, coming soon. 245K 7z YC GB3 285K 7z YC GB3
November 1, 20241 yr 265k 5,5 4,9 3,8 This is all i can do atm with 16a. Edited November 1, 20241 yr by snakeeyes
November 4, 20241 yr Looks like an interesting platform ! Do we have any tools or special BIOSes for board yet ? Should be receiving mine in hopefully not too long
November 7, 20241 yr Author On 11/4/2024 at 8:05 AM, Paul7347 said: Looks like an interesting platform ! Do we have any tools or special BIOSes for board yet ? Should be receiving mine in hopefully not too long Come join the party 😎 Also mods, can we move this to the Z890 OC section? The only reason I put it here is it didn't exist at the time of thread creation.
November 8, 20241 yr Author New bios pumping up those megahurtz 10k YCunt done 10266 GB3 And thanks to @NickShih for working so hard on optimizing every new UEFI.
February 24Feb 24 Author Getting reacquainted with ARL for OCWC 2026 preparationsYC 1B YC 2.5BYC 5B Edited February 25Feb 25 by l0ud_sil3nc3
February 26Feb 26 Author @coolice @NickShih Any idea why every bios post 3.xxx has some form of clipping ( IA Electrical Design Other & GT Max VR Voltage, ICCMax, PL4) when all power limits are set to unlimited? Even heavily undervolted frequency is throttled heavily and it seems like pulling anymore than 300 watts or so causes it. All TVB settings are set to disabled also to clarify. I will say latency seems much better on later bios revisions (probably microcode) but not being to heavily overclock the cores is a major showstopper.
March 2Mar 2 Author 2 hours ago, coolice said:are you still seeing it with 3.12.TL02?Yes TL, all versions after 2.28 will send you a pm have some screens to show you what I am talking about.
March 2Mar 2 Author 1 hour ago, l0ud_sil3nc3 said:Yes TL, all versions after 2.28 will send you a pm have some screens to show you what I am talking about.YGPM
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.