March 5, 20251 yr 38 minutes ago, Mr.Scott said: What vcore? 1.78v here. Cpu is happy with 1.6v @3.55ghz and voltage curve goes to sky after that. I also wasn't able to validate this cpu above 3.65ghz this time - no matter voltage. I'm going to check some other things later this month (vdda and ldt voltages).
March 5, 20251 yr What can i say. After so many years (in this hobby) , i thought i've seen it all. But ... i was wrong. Congrats for this awesome combo (board and cpu) and score !! Die temp ?
March 5, 20251 yr Should be -30 with the load like that (knowing my ss unit). -40 when idle. I control temps only with hot chips that may de-frost evaporator in order to shut down just before it happens.
March 6, 20251 yr Nope, not really. You can measure delta between load and idle pretty accurately but I’ve had temp readings colder than my evap temp on A64.
March 8, 20251 yr On 3/6/2025 at 7:19 AM, TerraRaptor said: Evap. Have no idea of the die temp? Is software monitoring that good with cold? I asked about die temps , because you know how weird these E5 and E6 cores react with negative temps. No software monitoring. Many years back , when i was using extreme cooling , i remember i had to actively monitor realtime the die temp with an extra temp probe on the Fluke. We had temp probes with very thin wires , that you could navigate through the cpu pins. At the edge of stability , even a 2C temp difference had an impact on benchmarks. For example , at -8C die temp you could finish the run , while at -10C you were blue screening (temp related) cold bug. When using an SS it's very hard to hold the temps you need. I was never lucky enough to have a 754 or 939 cpu without a cold bug (and we didnt have a list of cpu steppings to have ... back then). On 3/6/2025 at 4:31 PM, raiden said: Nope, not really. You can measure delta between load and idle pretty accurately but I’ve had temp readings colder than my evap temp on A64. What do you mean ? Evap temp will always be higher (colder) than die temp
March 10, 20251 yr On 3/8/2025 at 12:08 PM, TASOS said: (and we didnt have a list of cpu steppings to have ... back then) Is this list of CB-free steppings available somewhere?
March 11, 20251 yr On 3/10/2025 at 2:41 AM, unityofsaints said: Is this list of CB-free steppings available somewhere? People that are still benching 754-939 with xtreme cooling should have a clue (i guess) It wasn't such a big list anyway. I can't find my notes at the moment (must be stashed away in some board box with other stuff ... probably) and as always , i will find it when i wont be looking for it.
March 11, 20251 yr Not CB free, but this was -130c ish - https://hwbot.org/benchmarks/pifast/submissions/4569395
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.