View in the app

A better way to browse. Learn more.

HWBOT Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS

Tap the Share icon in Safari
Scroll the menu and tap Add to Home Screen.
Tap Add in the top-right corner.

To install this app on Android

Tap the 3-dot menu (⋮) in the top-right corner of the browser.
Tap Add to Home screen or Install app.
Confirm by tapping Install.

HWBOT Community Forums

GTX 960 PNY XLR8 Vcore Mod

Followers

July 6Jul 6

GTX 960 PNY XLR8 Core Voltage Mod, Pic one is the card model, second pic is back of the pcb showing pot and location of the NCP81174 Controller. "dont mind the work was quick and currently going under more work as this pcb isnt great as is.." Third Pic is the NCP81174 Controller and the resistor I soldered a 200k pot to for the voltage mod.. You can use a 40kohm pot though.. "Connect wiper side to that resistor and ground to.. ground.. any ground connection works". With this mod and pot all the way down you will have an extra 20mv off the bat. Very easy Mod only thing I did to make work was solder some 28 gauge wire across my shunt resistors for a quick N dirty no power limit mod.