Jump to content
HWBOT Community Forums

Is this a rare chip? 2700k x55+ multi..


Recommended Posts

I have a 2700k that I am most certain is a silicon lottery winner but due to my lack of expertise/funds I would never attemp LN2 or whatever those extreme cooling methods are.. I do want to setup a water loop eventually.. NEVER LOADED @ THESE VOLTS !!

 

69e6d76e_54x1.55vOMG.jpeg

 

d96c123b_55HTx1.62vOMGG.jpeg

 

560c1ce7_56xlol.png

 

Sorry for the big picture dont know how to resize.. Basiclly seeking advice from you guys whether or not this chip is something special or just average I might sell it or wet it up!!

Link to post
Share on other sites

What does it mean if I set the multi to 57x it shows a blinking line and then says Windows but freezes before the logo animation/welcome screen? I know the problem here is temp because it's on 20$ 212+ want to try 58x multi but need to understand how to tell if it's working or would never boot!

 

"You just need to see the windows OS options, not actually boot into windows. If your CPU can show the different OS options, stability will just be function of Vcore and temperature. If it doesn't show the OS options, you will never get it stable anyways, so you might as well ditch the CPU."

 

Does this mean I want to smash F8 and not even try to get into windows??

 

Thanks heres a pic of lower speed stable!

 

e115c29e_4.7HT1.345min12hoursSTABLE.jpeg

 

39e87a27_4.81.365min13hoursSTABLE.jpeg

Edited by dVeLoPe
Link to post
Share on other sites

try booting at 98x57 (yes, downclock BCLK) ... since we know that your CPU/cooling can handle 5.6GHz, the only reason it'd fail would be inability to work with x57 multiplier

after that, you can try slowly raising the BCLK using x56 to see where it stops

 

so far the CPU looks above average to me

Link to post
Share on other sites

Whats funny is this is around my 6th CPU had 3x 2600k and 2x 2500k and I never tested their max multi's.. only try to find one that runs 5ghz under or around 1.400v so I don't have to spend 200$ on a loop but my luck not so good... still this is nice!

 

like my i5-760 was amazing clocker on air!!

 

a8f906cf_4.4141.4.png

 

What does a x56 multi+ cpu sell for? I am willing to give a good deal to someone that will put it under LN2 and become some sort of record holder with it lols!

Link to post
Share on other sites

I just got tired of trying... when I set multi to 57x i can see the windows options but cant boot to windows never tried 58x - 60x

 

The best I was able to boot was like 100.3x56 for like 5622 or something under 5650

 

Here is the best SuperPi 1M I was able to get with 30$ 1600XMP C9 G.Skill ram 6.830!!

 

23b947e8_6.830pi1m55x4c.jpeg

Link to post
Share on other sites

The best I can get out of my 2700K is 5.5 GHz. It won't boot with a 56 x multiplier, and even a 100.1 bclk at 55x doesn't boot. No combination of bclk and multiplier will get me even 5 MHz over 5.5 GHz (at stock I can get a stable bclk of 106 with a little tweaking of skew :). I don't mind though, I have a daily overclock of 5 GHz, and combined with a golden GTX 570 I got some pretty good benches :)

Link to post
Share on other sites
The best I can get out of my 2700K is 5.5 GHz. It won't boot with a 56 x multiplier, and even a 100.1 bclk at 55x doesn't boot. No combination of bclk and multiplier will get me even 5 MHz over 5.5 GHz (at stock I can get a stable bclk of 106 with a little tweaking of skew :). I don't mind though, I have a daily overclock of 5 GHz, and combined with a golden GTX 570 I got some pretty good benches :)

 

I am able to boot 57x see the blinkin line and windows options if i press F8 but it's the temps im sure running a 1m PI @ 55x and it hit 81c but I dont even need such a high multi chip mainly need one that can do 50x@1.39v OR UNDER lols looks like im going to be going water pretty soon after I get my income tax check Switch 810 such a sweet case!! I am currently seeking a 2500k that can meet that hopefully I dont get another fail chip lols..

Link to post
Share on other sites

at 57x I have seen a few diff things which all result in me having to reset the CMOS :

 

Blinking line flashes a few times then freeze

Blinking line says Windows animation starts to animate freeze

 

Press F8 before that puts me to safe mode screen and their were a few others remind you this is with an asus p8p67 pro default settings except for a few things basiclly ultri high llc and manual voltage with xmp ram settings all i changed and disabling ht/cores

Link to post
Share on other sites

Some money is coming my way and I will be setting up a custom water loop when the Switch 810 case is released would like to get into the know as to what I should/could bench that would be benifitical to the HWBOT/forums with around 5.2 - 5.4 ghz (5.5+ requires LN2)

 

I would like to do both 2d/3d but only have 3dMark11/Vantage installed at the moment.

Link to post
Share on other sites
Some money is coming my way and I will be setting up a custom water loop when the Switch 810 case is released would like to get into the know as to what I should/could bench that would be benifitical to the HWBOT/forums with around 5.2 - 5.4 ghz (5.5+ requires LN2)

 

I would like to do both 2d/3d but only have 3dMark11/Vantage installed at the moment.

 

Are you sure you are in the right forum, :P.

 

You do not bench on hwbot for the benefit of hwbot or its members. You should be on hwbot if you are competitive and do feel some/lots of passion to bench not only what you have but what you can beg, borrow and steal........:D

Link to post
Share on other sites

well you get the point... If I was part of a ''team'' I wouldnt mind benching this and that but confused on where to start I know im not benching my hardware for you guys on hwbot to benefiit from it but im sure everyone wants more points dont ya??

Link to post
Share on other sites
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...