Jump to content
HWBOT Community Forums

Tsunamijuan - A8-3870K @ 5900.5MHz - 5900.5 mhz CPU Frequency


I.M.O.G.

Recommended Posts

How was the boil off at those volts Juan?

 

On bulldozer, boil off seems the same as deneb/thuban at less than 1.8v or so. Above that and boil off at idle is similar to deneb/thuban under load.

 

Curious if you notice a big difference at 2.3v compared to 1.8 or less on the chip.

Link to comment
Share on other sites

How was the boil off at those volts Juan?

 

On bulldozer, boil off seems the same as deneb/thuban at less than 1.8v or so. Above that and boil off at idle is similar to deneb/thuban under load.

 

Curious if you notice a big difference at 2.3v compared to 1.8 or less on the chip.

 

It could be a little more extreme at times, you could tell when it froze or was getting close to freezing due to how rapid the boil would get. Otherwise the chip is generally so low powered that its just sipping ln2 most of the time. Only time you really really notice these chip heat up is when you get a 4core + apu load, At that point the temperature and watt load swing quite quickly, from the 130ish-170ish watts to around 350-400ish watts under extremely high clocks.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...