Jump to content
HWBOT Community Forums

Ivy Bridge 3570K/3770K Batch and Serial Numbers


Massman

Recommended Posts

  • Replies 737
  • Created
  • Last Reply

Top Posters In This Topic

Hi Nachtfalke...

I have found the same batch 3770K.

Can you test it with Single Stage ? I want to know if it can do 5.7, 5.8 GHZ 4c 8t to change my 2600K that it has bad memory controller with Z77 chipset.

 

Thanks

Andrea

Yup the cip can 5,7 on SS for 1M , my cip work better with 4/4htt- 4/8htt , 5,5 boot in windows and than 5,6 -5,7 with rog connect from another pc http://forum.lab501.ro/showpost.php?p=201511&postcount=4493

Link to comment
Share on other sites

Yup the cip can 5,7 on SS for 1M , my cip work better with 4/4htt- 4/8htt , 5,5 boot in windows and than 5,6 -5,7 with rog connect from another pc http://forum.lab501.ro/showpost.php?p=201511&postcount=4493

 

If it can do 5.7GHZ with 1.65V in 3D bench is ok for me. Can you try? Or a 32MB SPI ?

Now with the 2600K I can do all 3D BENCH @ 5.7 GHZ 1.65V under SS, but with 3DM VANTAGE I must set 5.6GHZ.

 

Thanks a lot..;(

Link to comment
Share on other sites

unfortunately I don´t think your cip can(my cip can not ) 3D on those freq... i think 5,5 for 3D ..

but the behavior is different from chip to chip (even from same batch) ..you need test it:)

good luck

 

At 5.5.GHZ i havn't benefit, only with memory frequency...i can test it if i can buy...

Thanks Nachty!

Link to comment
Share on other sites

fuuuuuu, I don't even want to waste LN2 if they don't boot 5ghz, and you still ended up with a 6.7 1c 1t.

Makes me wish I would have tested the ones that didn't boot 5ghz on air under cold:(

 

however I just picked up a new Malay with this batch #:

 

L223B796

 

testing tonight on air, hoping its not a turd .

 

any update on this one

Link to comment
Share on other sites

  • Crew

Tested one of the

 

3224A968

 

boot 2933 strap memory no probs. (on gigabyte UP5, msi gd65 could not)

 

1.35v 5ghz 32m (2core)

1.69v 6.4ghz LN2 (1M)

1.69v 6ghz 4c 8t (physix and 3d)

 

 

When i add volts above 1.7v i get shutdown almost like OCP when running benchmarks. And when running 3d 11 physix i bluescreen with error 124.

 

No matter what temps or clock, 1.7v+ = instant crash.. i wanna know what this cpu can do at 1.85v arghh

Link to comment
Share on other sites

The 3218C017 did 6.15ghz spi 32M on cascade -94

The 3218C043 not testet yet

The 3218C055 did 6.28 spi 32M

 

Hope to test ln2 next week

 

3218C043 did 6,71ghz spi 32M

But we had alot of problems with cb and cbb, and alot of debug code 55 which meant demount and defrost

We benched on Asus V formula

Edited by Nanok
Link to comment
Share on other sites

Hi Nachtfalke...

I have found the same batch 3770K.

Can you test it with Single Stage ? I want to know if it can do 5.7, 5.8 GHZ 4c 8t to change my 2600K that it has bad memory controller with Z77 chipset.

 

Thanks

Andrea

Sorry dude, expect about same freq with SS on ivy, as you did water on sandy, unless you got a powerful rotary..

 

5.2-5.4ghz stable is about it I guess :(

 

5ghz 1.35v 2c fine (8 core crash windows boot)

Badass! I want 8 core ivy!

Link to comment
Share on other sites

3570K Batch 3221B905 test with LN2 not good...Cold boot at -85° and cold bug at -120°. Can do 5.7GHZ 1.785V 4c/4th, but good memory controller, 1351MHZ CAS 11-12-12-30 1T with GEIL EVO CORSA 2400MHZ CL11 @ 1.65v

 

t171849_pi-1mb.jpg

 

have you checked your coldbug above 105bclk as it should ?

 

on topic

3770K L223C207 #1 - 5ghz 4c/8t 1.392v / #2 1.344v

testing it on ln2 on wednesday

Link to comment
Share on other sites

have you checked your coldbug above 105bclk as it should ?

 

on topic

3770K L223C207 #1 - 5ghz 4c/8t 1.392v / #2 1.344v

testing it on ln2 on wednesday

 

 

I have tested the CPU only with basic bclk, max 101.3 as you can see. Should be that the CPU have no cold bug with higher bclk than 105 ?

Link to comment
Share on other sites

  • Crew
Thanks Vivi...It means that the cpu can do higher frequency, not only 5.7 GHZ. It's correct ? This is my first Ivy Bridge and the first time I have used LN2. I can do experience

 

yea man 5.7 is terrible. you should see 6.2+ at a least at -180 with that CPU. you will enjoy it

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...