Jump to content
HWBOT Community Forums

Ivy Bridge 3570K/3770K Batch and Serial Numbers


Massman

Recommended Posts

I've never dabbled in zub zero cooling mate but fancy having a go at some point.

 

For now it's delidded and under custom water. Temps are pretty great. Got my 5.4 & 5.5GHz profiles set up for benching. IMC seems pretty strong. Stable with 4x8GB Teamgroup 2666MHz but after running a few tests 2400 is the sweet spot. Anything higher and the read/write bandwidth starts to drop quite rapidly.

 

Sounds good! Whats your 24/7 clock speed and volts?

Link to comment
Share on other sites

  • Replies 729
  • Created
  • Last Reply

Top Posters In This Topic

Wow... 5.5 on water? Sounds lovely!

 

5.5 around 1.5v seems good for a quick run. Could do with more voltage but the limit kicks in soon after. I would need to enable LN2 mode to get around it but haven't given that a try yet.

 

th_super%20pi.png

 

1M 5.5

32M 5.4

 

Sounds good! Whats your 24/7 clock speed and volts?

 

5.1 1.325v is my 24/7 clock. Previously had it 5GHz 1.28v.

Edited by Bluntwrapped
Link to comment
Share on other sites

5.5 around 1.5v seems good for a quick run. Could do with more voltage but the limit kicks in soon after. I would need to enable LN2 mode to get around it but haven't given that a try yet.

 

th_super%20pi.png

 

1M 5.5

32M 5.4

 

 

 

5.1 1.325v is my 24/7 clock. Previously had it 5GHz 1.28v.

 

Nice clocks dude, however wondering why bump to 5.1GHz thats quite a voltage bump for the sake of 100Mhz.

 

Either way looks like you've got a very good clocking chip there! What I wouldn't give to put that under my Single Stage Phase to see how much further it could go ;)

Link to comment
Share on other sites

Thanks man :)

 

I had it sitting 5Ghz for about a year under my makeshift loop. After taking the lid off I gave bare mount a try using the MSI delid die guard followed by the EK naked mount kit. Both were pretty underwhelming and hindsight a complete waste of time. Little to no benefit and I spent ages mounting and remounting each just to get an even amount of pressure across the die.

 

After stripping everything down for the fourth time I thought I'll try again with the lid on but this time twice as much CLU as I had used previously. I was surprised when I saw roughly an 8c drop over what I was seeing before during a 10x loop of IBT. While it is quite a bump from 5 to 5.1, I thought since I have a bit of extra headroom to play with it'd be a shame not to use it. That was really the extent of my thinking and reasoning! That, and there's something extremely satisfying about firing up CPUZ to see 5100Mhz :D

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...