Jump to content
HWBOT Community Forums

LGA1156 Clarkdale COLDBUG modifications!!


Massman
 Share

Recommended Posts

  • Crew
PEG_RBIAS present on 1366 platform too, but related to IOH.

 

If anybody want try I can show :)

 

Tylersburg chipsets have PE0RBIAS (ball AN34), PE1RBIAS (ball AN13). these are hooked to GND with same 750ohm resistor.

 

But coz 1366 IOH is extra chip, not part of CPU package it may not be related to CB/CBB's.

 

Thought about it, but could not find...

 

Can you please tell me the landmark or sent me magnifying glass...:D

 

Lets see, I might try...

Link to comment
Share on other sites

  • 3 weeks later...
  • 3 weeks later...
  • 2 weeks later...
  • 1 month later...

Im gonna do this mod on the h55m-USB3 I think its the same spot as the the last 2 pics. Ill post results.

 

 

EDIT

 

so far so good. the mod went fine and I can boot in at any temp I went as far as -145c and no problems. FOR THE RECORD THE LAST 2 PICS WORK CB MOD ON H55M-USB3!!!

 

THanks again! now if anyone can help me remember my settings. Thats another story.

Link to comment
Share on other sites

  • 4 months later...
Yes it is, the same as gd85. Should i follow your guide in benchtec?

 

hey

the youtube vid is for cold bug mod

(lol you edited^)

if its the same controller as the gd 85 then heres a link to the gd-85 volt mod

 

http://www.benchtec.co.uk/forums/showthread.php?t=5854

 

also consider if the max is 1.7v in the bois you have the voltage dipper for 0.2v i know with the gd -80 if you set 1.7v in the bios then click the dipped you get like 1.88v just test it out say set the voltage in the bois at 1.1v then probe the V-read point click the cpu dipper and probe again im sure its a 0.2v jump

 

cant really check as the triergy i had the dr mos blew up when they got wet :(

Link to comment
Share on other sites

hey

the youtube vid is for cold bug mod

(lol you edited^)

if its the same controller as the gd 85 then heres a link to the gd-85 volt mod

 

http://www.benchtec.co.uk/forums/showthread.php?t=5854

 

also consider if the max is 1.7v in the bois you have the voltage dipper for 0.2v i know with the gd -80 if you set 1.7v in the bios then click the dipped you get like 1.88v just test it out say set the voltage in the bois at 1.1v then probe the V-read point click the cpu dipper and probe again im sure its a 0.2v jump

 

cant really check as the triergy i had the dr mos blew up when they got wet :(

 

yeah... iirc, in bios i set to 1.71v then after pushing the switch it's 1.8v. too bad now do not have the correct VR to apply the mod. only had 20K. thanks for your guide though.

Link to comment
Share on other sites

  • 9 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...