Jump to content
HWBOT Community Forums

Brazilian Overclocking Championship 2013


rbuass
 Share

Recommended Posts

Brazilian Overclocking Championship 2013

 

rjp1sw.jpg

 

The 10 finalists was the 10 better overclockers in the online competition, that started one month ago...

 

http://www.hardwarebr.com/forum/showthread.php?6199-Dada-a-largada-Campeonato-Brasileiro-de-2013-T%F3pico-Oficial

 

Attempt in the online stage above, we had about 80 CPUs and 35 videocards allowed, but not obscure hardware and people that got scores near World record from each category was the winners in each category (CPUZ, Spi 1M, Wprime 1024, 3DMark01, 3DMark03, 3DMark06, 3Dmark11, Unigine Heaven DX11, so, every overclocker were able to be part of the competition.

 

Information about X5 Arena

 

http://www.facebook.com/x5comp

 

Location:

 

X5 Computers Arena, located at Rua Monte Serrat 967, Tatuapé, São Paulo, SP, BR.

 

The event will be closed to competitors, organizers and media but will be broadcast Live Stream by professional team of X5 Live Stream.

 

Time: 10:00 to 21:00

Schedule:

10:00 a.m. to 10:29:59 - Presentation

10:30 a.m. to 10:59:59 - Home, preparation and testing of equipment

11:00 - 14:29:59 - First stage (race enthusiast)

14:30 - 15:29:59 Evaluation of results and definition of finalists

15:30 - 15:59:59 - Final Stage - preparation and testing

16:00 - 19:59:59 - Final Stage (extreme competition)

20:00 - 21:00:00 - Proclamation of champions and prize-giving party

 

From 11:00 there will be snacks available for competitors.

It will be optional for each one, pausing for food order that is convenient.

 

Competition Rules:

 

Once the competition begins, all contestants will have 30 minutes to prepare and test all components, with no back up components and exchanges, if any, shall be compulsorily required before the end of this term.

Adjustments may be made ​​in the settings and before testing to optimize time during the testing period, but may not be valid results.

They can also be set overclocking profiles.

All equipment will be divided on a fully equal and impartial, and there will be a raffle for each computer with before installed operating system and all programs required for the competition.

It will be forbidden to use memories, flashes or any component to "integrate" any extra software.

 

Phase 1 - Enthusiast style (cooled by H100i)

 

The whole stage is conducted with 10 identical machines.

They all have exactly the same features, and SSDs will be formatted exactly the same.

There will be a draw where each competitor will receive a number that will correspond to the machine being used.

It is for each contestant to choose the parameters and tweaks deemed appropriate to achieve the best results.

There will always be someone nearby the organization to meet any request that might be needed to competitors.

Each competitor may choose the order you want to perform the benchmarks, but the results should be saved to updated immediately after each conquest.

We choose this way to improve the dynamics of competition and also for all competitors have an incentive to get even better results.

All results must be submitted with the official wallpaper competition and exchanges will not be accepted.

We recommend that all competitors do first to capture screen in own SSD and only after saved copy in flash drive (for it will be present on the desktop software Zoomg, clicking on the same icon).

 

 

Test 1 - Memory Clock

 

To open the flaps of CPUZ (memory and processor frequency).

We recommend saving the file "cvf" Original CPUZ (simply enter the tab "about"> "validation" and saving the file or simply by clicking on the screen frequency and pressing the F7).

Thus the result can also be validated in the global league

All results will be followed by judges and organizers and must be saved to flash memory (flash drive) immediately.

Periodically, judges and organizers may request the flashes to update the rankings.

 

 

Test 2 - Super Pi 1M

 

To open the flaps of CPUZ (memory and processor frequency).

Required that the benchmark submit your score altogether, with the checksum (number validation Spi)

All results will be followed by judges and organizers and must be saved to flash memory (flash drive) immediately.

Periodically, judges and organizers may request the flashes to update the rankings.

 

 

Test 3 - 3Dmark11

 

To open the flaps of CPUZ (memory and processor frequency), GPUZ (showing the frequency of the video card).

All results will be followed by judges and organizers and must be saved to flash memory (flash drive) immediately.

Periodically, judges and organizers may request the flashes to update the rankings.

 

Important: The first stage ends at the designated time without fail, and if any test run, this can not be validated.

 

Ratings by benchmark

 

3Dmark11

 

1st place - 20 points

2nd place - 17 points

3rd place - 14 points

4th place - 11 points

5th place - 8 points

6th place - 5 points

7th place - 3 points

8th place - 2 points

9th place - 1 point

10th place - 0 points

 

Spi 1M:

 

1st place - 18 points

2nd place - 15 points

3rd place - 13 points

4th place - 10 points

5th place - 7 points

6th place - 4 points

7th place - 3 points

8th place - 2 points

9th place - 1 point

10th place - 0 points

 

Memory Clock:

 

1st place - 16 points

2nd place - 14 points

3rd place - 12 points

4th place - 9 points

5th place - 6 points

6th place - 4 points

7th place - 3 points

8th place - 2 points

9th place - 1 point

10th place - 0 points

 

The four competitors who obtain the highest score (sum of the results of the 3 benchmarks), and will be finalists for the finals.

In the event of a tied result, prevail the competitor with the highest score at the benchmark of greater validity, namely, in this order:

3Dmark11> Spi 1M> Memory Clock.

 

 

Phase 2 - Extreme (final - cooled by LN2)

 

The extreme phase is performed with four identical machines.

They all have exactly the same features, and formatted SSDs are identical (including be cloned).

There will be a raffle where each competitor will receive a number that will correspond to the machine being used.

It is for each contestant to choose the parameters and tweaks deemed appropriate to achieve the best results.

There will always be someone nearby the organization to meet any request that might be needed to competitors.

Each competitor may choose the order you want to perform the benchmarks, but the results should be saved to updated immediately after each conquest.

All results must be submitted with the bottom screen official competition and exchanges will not be accepted.

The extreme phase follows the same observations of phase enthusiast.

 

 

Super Pi 32M

 

To open the flaps of CPUZ (memory and processor frequency).

Required that the benchmark submit your score altogether, with the checksum (number validation Spi)

All results will be followed by judges and organizers and must be saved to flash memory (flash drive) immediately.

Periodically, judges and organizers may request the flashes to update the rankings.

 

 

3Dmark 01

 

To open the flaps of CPUZ (memory and processor frequency), GPUZ (showing the frequency of the video card).

In the case of 3DMark01 is required to open the Details tab on the screen and show the results of the sub-tests required.

All results will be followed by judges and organizers and must be saved to flash memory (flash drive) immediately.

Periodically, judges and organizers may request the flashes to update the rankings.

 

For confirmation of all the tests are used the same rules and regulations used in league posting world (which was obeyed by all for the ratings for the finals).

So these are known to all and will not be allowed any results outside the rules.

In both phases, the results should be constantly updated by the organization, so they can be accompanied by competitors and the public.

 

Test 3 - 3Dmark11

 

To open the flaps of CPUZ (memory and processor frequency), GPUZ (showing the frequency of the video card).

All results will be followed by judges and organizers and must be saved to flash memory (flash drive) immediately.

Periodically, judges and organizers may request the flashes to update the rankings.

 

 

Important: As the first phase, the deadline for results without fail ends at the designated time, and if any test run, this can not be validated.

 

Note: The organization of the league reserves the right to refuse any outcome that deems suspect for any reason it deems sufficient.

 

Scoring rules of extreme phase:

 

The Brazilian Champion will be the competitor with the most points in the sum of all benchmarks.

In the event of a tie, the competitor will prevail with the highest score at the benchmark of greater validity, namely, in this order:

3Dmark11> 3DMark01> 32 Spi

 

Ratings by benchmark

 

3Dmark11:

 

1st place - 20 points

2nd place - 17 points

3rd place - 14 points

4th place - 11 points

5th place - 8 points

6th place - 5 points

7th place - 3 points

8th place - 2 points

9th place - 1 point

10th place - 0 points

 

3DMark01:

 

1st place - 18 points

2nd place - 16 points

3rd place - 13 points

4th place - 10 points

5th place - 7 points

6th place - 4 points

7th place - 3 points

8th place - 2 points

9th place - 1 point

10th place - 0 points

 

Spi 32:

 

1st place - 17 points

2nd place - 15 points

3rd place - 12 points

4th place - 9 points

5th place - 6 points

6th place - 4 points

7th place - 3 points

8th place - 2 points

9th place - 1 point

10th place - 0 points

 

 

Awards:

The awards will be held as follows:

 

1st Place - $ 3500; Entering the main presentation Overclocking Campus Party 2012, Brazilian Champion Trophy Overclocking 2013.

 

2nd Place - $ 1500; Entering the main presentation Overclocking Campus Party 2012, Brazilian Champion Trophy Vice Overclocking 2013.

 

Other participants: All competitors will receive the official competition shirt and all participants of the third to tenth place, a medal for merit of having qualified for the finals.

 

There will be prizes "surprise" that will be distributed at the end of the competition, but only time will be announced to keep its features.

 

The equipment will be further defined at the beginning of next week, but we can say that the platform will be used

 

Motherboard Intel/Z77

CPU Intel 3770K

RAM Dominator Platinum 2400 Mhz 4 x 4GB

VGA Nvidia Series 6XX

PSU Corsair Series AXi

SSD Corsair Sata 3

 

More definitions in a couple of days...waiting confirmation

 

Sorry the bad english

 

 

Good luck for all.

Edited by rbuass
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...