Jump to content
HWBOT Community Forums

Haswell 4670K/4770K Batch and Serial Numbers


Massman

Recommended Posts

Finally got myself some Haswell.

 

First CPU looks good, or at least above average. Will have to see under LN2 if it scales :D

 

4770K batch 3318B691

 

4c/8t 32M @ 5GHz 1.36v

 

f3gea4D.jpg?1

 

4c/4t 32M @ 5GHz 1.35v

 

jJi6zEJ.jpg?1

 

2c/2t 32M @ 5GHz 1.34v (didn't try lower)

 

CvAbQeS.jpg?1

 

LN2 Results: (3318B691)

 

CPU-Z : http://valid.canardpc.com/8yr0hg

 

SuperPi 1M : http://hwbot.org/submission/2500836_

 

wPrime 32M : http://hwbot.org/submission/2500833_

 

wPrime 1024M : http://hwbot.org/submission/2500832_

 

PiFast : http://hwbot.org/submission/2500829_

 

HWBOT Prime: http://hwbot.org/submission/2500827_

 

Cinebench: http://hwbot.org/submission/2500771_

 

 

Coldbug was bad; around -95.

 

Multimeter voltage was around 1.79v

 

Edit: Thermometer might have been inaccurate by 10 degrees so coldbug was possibly -105

Edited by QuantumX
Link to comment
Share on other sites

  • 2 weeks later...

Has anyone i5 4670K with this batch?:

 

3329B715 Costa Rica?

 

I need OC settings.

 

Now i don't set the ring voltage&frequency just the cpu voltage and freq.

 

Under x264 64bit hd encoding stabile 4,4 GHz@ 1,288V :S

Bios Settings:

Adjust Cpu Ratio: 44

Adjust Cpu voltage 1,272V

Offset:Auto/Auto

 

Ring ratio/voltage/offset-all on auto.

DigitAll: all on auto.

 

Is it good or s.h.i.t. ?

 

Now i use adaptive settings not override.

Link to comment
Share on other sites

Has anyone i5 4670K with this batch?:

 

3329B715 Costa Rica?

 

I need OC settings.

 

Now i don't set the ring voltage&frequency just the cpu voltage and freq.

 

Under x264 64bit hd encoding stabile 4,4 GHz@ 1,288V :S

Bios Settings:

Adjust Cpu Ratio: 44

Adjust Cpu voltage 1,272V

Offset:Auto/Auto

 

Ring ratio/voltage/offset-all on auto.

DigitAll: all on auto.

 

Is it good or s.h.i.t. ?

 

Now i use adaptive settings not override.

 

try playing about with the cache ration too, set that to x40 and see if you are stable at lower voltage then. At the moment it's not looking that good a chip I'm afraid :(

Link to comment
Share on other sites

try playing about with the cache ration too, set that to x40 and see if you are stable at lower voltage then. At the moment it's not looking that good a chip I'm afraid :(

 

I tried, i got the same results.

 

I tried at 4,5Ghz, x264 HD Bencmark 5.0.1 need 1,344V :(

 

@4,6GHz- 1,4V frozen under windows 7 startup ...

If i give more than 1,4V always frozen my computer.

 

affect the power supply or the motherboard?

BeQuiet System Power 7 400W PSU/ MSI Z87 G43 mobo.

I know its not the best for oc.

Link to comment
Share on other sites

I had about 3x L315B407, good air clockers but did not scale on LN2 for me, lets hope yours is different!

 

Mine did 1.36v 5ghz 32m for your reference, and was a very hot chip, 87c load average at 1.4v on corsair h60 and 4.5ghz cinebench

 

L315B407 looks good so far. All did 4,5 - 4,6 on air Primestable and stay below 80°C

 

Need to test on LN2 tho

 

Hello there, I have the same batch as this one and it requires 1.265VID for 4,4 on prime and it doesn't boot with 4,6 1.25VID. I could be doing something wrong since many from this batch have done much better than me. Can you please share the settings you used to run those speeds. I know this is a really old post but i'm kinda puzzled at this result and thinking it could be my Mobo(Asus Hero). Feedback is much appreciated.

 

Additional info: Auto Uncore multi and Vring, 1.87 Vin, LLC lvl 8 (SVID off, Igpu off, Cstates enabled w/ c7 short). H100i cooler

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...