Jump to content
HWBOT Community Forums

[BUGS] Let us know if you experience issues!


Recommended Posts

  • 3 weeks later...
XTU loves to give my cpu an extra 100mhz which means as soon as i open the program the pc instantly bsod because its running too fast for that voltage

How is XTU setup , are you running a profile at startup . It should not do anything just starting XTU till you load a profile or make changes and apply them .

 

I have noticed a bug in XTU monitoring frequency graph, If I run say SuperPI and what the frequency graph and value it does go above my clock speed for a sec or so.

 

example, I have all cores set to 42x , blck@100 , so max clock is 4200 but at times it says 4300 but no other software shows this ,CPU-Z, HWinfo64, HWmonitor etc .

 

Also this happens in XTU Benchmark to now that it lists max temp and max frequency , I get 100+mhz listed .

Edited by edkiefer
Link to comment
Share on other sites

  • 1 month later...

Seems version 5.1.0.22 is out ,maybe this will fix the issues BM not running .

 

readme

 

5.1.0.22 [PV] – 07/08/2014

1. Changes

1. Rebuild with defect fixes.

2. Fix for the root certificate issue

3. Fix for the XTU ACPI WHQL installer issue.

 

5.1.0.17 [beta3] – 14/04/2014

2. Changes

4. Rebuild with defect fixes.

 

5.1.0.13 [beta2] – 03/04/2014

3. Changes

5. Rebuild.

 

5.1.0.3 [beta1] – 02/20/2014

1. Changes

1. Fixed the display of >4 Active Cores ratio controls.

 

5.1.0.2 [Alpha] – 10/18/2013

1. Features

1. Application updated to support Haswell-E Platform.

Link to comment
Share on other sites

  • 2 weeks later...

More information on why XTU doesn't work with older systems here: http://forum.hwbot.org/showthread.php?t=109368

 

The reason for the platform requirement is the hardware/bios profile that is attached to the result. When you're uploaded a benchmark result, you are actually uploading an XTU profile with a benchmark score attached to it.

 

The problem is that the platform characteristic for pre-SB and post-SB architectures vastly differs. Because it differs, it's not possible to create an XTU profile with these architectures. And without a profile, it's not possible to submit a score.

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 1 month later...

don't have time to read the entire topic just some quick input:

 

performance is noticably affected when XTU runs in the backround - ~1k points on the Pentium during 05 and almost a minute in low-clocked Pi

 

check your baseclock after using XTU - on my SOC even it says 100 in the bios, it will apply the last setting from XTU sometimes (even it shouldn't autostart)...maybe related to full reset, didn't investigate further.

 

think the multiplier switch doesn't work due to special things on the SOC, need to check specs for compatibility in the other topic. maybe a "compatibility list" would be cool.

 

It's a nice little tool all in all - serves pretty well in many situations and hope the improvements continue over time. Monitoring features etc. working good - I think AIDA32/Everest/Realtemp and many more old tools have opend an anonymous depression circle already :P

Link to comment
Share on other sites

I might have found a bug. :) I use BPM (bill´s processmanager) to autoset affinity and priority to real time to XTU and Prime95-bench and with that I get a bit too good scores...

 

I have tested it on my laptop too and got the same results. This is from my benchrig and this should not be this high...

 

YDWidIq.jpg

 

And yes, it can be reproduced but with very different scores.

 

This was done with 4.4.0.2

Link to comment
Share on other sites

  • 1 month later...

Hello, I've recently got MSI H81m-P33 and trying out XTU 5.1.0.101 from the MSI site. It works, but every time I click on "settings" it stops working with error popup " Perftune has stopped working".

System Win7 sp1 Ultimate 64, don't remember seeing this error with anything else.

Description:
 Stopped working

Problem signature:
 Problem Event Name:	CLR20r3
 Problem Signature 01:	perftune.exe
 Problem Signature 02:	5.1.0.101
 Problem Signature 03:	53e3cb27
 Problem Signature 04:	PerfTune
 Problem Signature 05:	5.1.0.101
 Problem Signature 06:	53e3cb27
 Problem Signature 07:	23
 Problem Signature 08:	10
 Problem Signature 09:	System.FormatException
 OS Version:	6.1.7601.2.1.0.256.1
 Locale ID:	2057

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...