Jump to content
HWBOT Community Forums

HWProject - AOC playing with Phenny 1090T+Crosshair IV Formula


|ron
 Share

Recommended Posts

On Sunday and Tuesday (yesterday) we, the AOC, played with our phenny 1090T and the crosshair 4, to take confidence with amd since those are our first runs.

 

Let's start, setting up everything with 1090T, C4F, 8800GTX and Kingston 2133C9 Kingston provided us for a review: testing to find maximum vga frequencies on air:

 

th_20100621094932_DSCN1780.jpg

 

th_20100621095508_DSCN1781.jpg

 

Phenny @ 4,25 and 8800gtx at his max on air:

th_20100621100737_16890.JPG

 

8K cpu score on air, not bad!

Then we started to do insulation on Ryba/sf3d gpu pot, to find max frequencies for the 8800gtx without still vmodding it:

 

th_20100621095538_DSCN1782.jpg

 

th_20100621101007_DSCN1783.jpg

 

th_20100621101112_DSCN1784.jpg

 

th_20100621101135_DSCN1785.jpg

 

th_20100621101258_DSCN1787.jpg

 

th_20100621101531_DSCN1788.jpg

 

Gpu pot mounted, here we go:

th_20100621101721_DSCN1791.jpg

 

th_20100621101805_DSCN1792.jpg

 

th_20100621101816_DSCN1793.jpg

 

We arrived at -120 on the 8800, but I have an old UEI DT200 that's going crazy, so take these temperatures with a grain of salt...

At -120, we managed to close at 783/1620/972...

th_20100621101928_18098.JPG

 

Contact between pot and gpu, good!

th_20100621102142_DSCN1794.jpg

Link to comment
Share on other sites

Given that we had problems, troubles, removing that kneaded eraser stuff from the Giga UD7, I tried a new way of preparing the mobo for the neoprene... the thought is to make capacitors and phases, "squared":

th_20100621102407_DSCN1795.jpg

 

th_20100621102432_DSCN1796.jpg

 

Done!

th_20100621102509_DSCN1797.jpg

 

Neoprene...

th_20100621102533_DSCN1798.jpg

 

th_20100621102604_DSCN1799.jpg

 

th_20100621102615_DSCN1800.jpg

 

And here we go with gpu and cpu under ln2:

th_20100621102659_DSCN1801.jpg

 

th_20100621102718_DSCN1802.jpg

 

th_20100621102738_DSCN1803.jpg

 

After 2 hours, insulation did it!

th_20100621102756_DSCN1804.jpg

 

So 5,6ghz max on the cpu, over 10k of cpu score.

 

http://hwbot.org/community/submission/1019359_aoc_3dmark_2006_geforce_8800_gtx_18098_marks?new=true

Edited by |ron
Link to comment
Share on other sites

Third and last part (for now :D )

 

th_20100623024318_18864.jpg

 

11.159@cpu score, 6ghz stable with "only" 1,8v real, with cpu load calibration ON in bios.

We can't move on from that frequency by entering in win from the bios, we think we should try to enter @5,95 and then going up by using amd overdrive...

 

Last score with even the gpu@ln2, now we absolutely need the Vmod :D

 

A question: when we were@5,94ghz, the mobo was switching continuosly the frequencies by 60mhz (2mhz of fsb with 30x multi gives 60mhz)... that's not good that, when you are at approx 6ghz, the frequency goes up and down by so much!

Have you experienced that?

 

By the way: bios 0801, we had also a little problem with that NB voltage bug that Leghoofd was speaking about in his review for madshrimps ;)

Edited by |ron
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...