teurorist Posted February 16, 2014 Share Posted February 16, 2014 of courser you should try it with phase change would be n1 to see Quote Link to comment Share on other sites More sharing options...
rsnubje Posted February 17, 2014 Share Posted February 17, 2014 Will do It will show up here eventually Quote Link to comment Share on other sites More sharing options...
I.nfraR.ed Posted February 17, 2014 Share Posted February 17, 2014 (edited) This is great, but the other guy deserves recognition too. He fed it with 1.8V from his vga's memory circuitry which is also awesome idea, without buying evga untouchables. Both results are awesome, keep us up to date. Interesting to see where the limits are . Edited February 17, 2014 by I.nfraR.ed Quote Link to comment Share on other sites More sharing options...
rsnubje Posted February 17, 2014 Share Posted February 17, 2014 He sure does Also one of the sources to make the Epower work properly(not solder to wrong points). I tried first with a voltage divider with a pack of resistors, which also worked, but couldn't regulate the voltage, it went from 5v to 1.66v. Quote Link to comment Share on other sites More sharing options...
Hopetech Posted April 7, 2014 Share Posted April 7, 2014 Hello, I'm a french student in IT and I'm just beginning in OC. I have a question: Is the OS important in the overclicking of the RPI? If yes, what is the best OS? Regards, Hopetech PS: Sorry for my english. Quote Link to comment Share on other sites More sharing options...
rsnubje Posted April 8, 2014 Share Posted April 8, 2014 Since the Raspberry uses no actual bios, you need an OS that has one, like Raspbian or Pidora, which are both meant for the Raspberry pi. Personally I would use Raspbian, because I think it works and handles well. If you are doing it for Hwbot Prime, don't forget to install Java JDK 8. It can be a pain to install in some cases tho. Quote Link to comment Share on other sites More sharing options...
Hopetech Posted April 9, 2014 Share Posted April 9, 2014 Thanks for the answer. I thought a lightweight OS such as archlinux or gentoo used fewer resources and thus improving performance. Last question: Did you tweak raspbian? Quote Link to comment Share on other sites More sharing options...
rsnubje Posted April 9, 2014 Share Posted April 9, 2014 My knowledge of linux in general is very slim, so I didn't do more than what is told in this topic:http://forum.hwbot.org/showthread.php?t=88888 Quote Link to comment Share on other sites More sharing options...
rsnubje Posted August 12, 2014 Share Posted August 12, 2014 Apearently, someone was able to bypass the 2GHz wall for me in the Raspbian core. Tested last night: Quote Link to comment Share on other sites More sharing options...
Luebke Posted September 22, 2014 Share Posted September 22, 2014 (edited) how do u guys get such high results? i only got 478 pts @1150 mhz cpu/450 mhz sdram with java8. what am i doing wrong to get such weak results? need help! what clock is possible for sdram without cooling? Edited September 22, 2014 by Luebke Quote Link to comment Share on other sites More sharing options...
rsnubje Posted September 23, 2014 Share Posted September 23, 2014 http://forum.hwbot.org/showthread.php?t=88888 That's all you need to know. Quote Link to comment Share on other sites More sharing options...
Luebke Posted September 23, 2014 Share Posted September 23, 2014 i´ve found the thread, but it doesn´t work on my pi on runlevel 1 it won´t run prime... anyway, team-cup is over for me now Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.