Jump to content
HWBOT Community Forums

HWSW - Phenom II X6 1090T BE @ 4434MHz - 5sec 576ms wPrime - 32m


Recommended Posts

so its hi or low?


my CPU not BE version :( and i cant goo higher on the air.


All 1090T have unlocked multiplier and that's what BE (Black Edition) means, so yes - your CPU is BE.

1.74V on air is very high for these. You're basically running in the dry ice territory.


I have M4A89GTD Pro/USB3 at home and as far as I remember, voltage readings were close to what is set in bios. This might have changed in latest bioses, I don't know.

Edited by I.nfraR.ed
Link to comment
Share on other sites

Do you have load line callibration enabled?

If not - enable LLC for CPU and disable LLC for CPU-NB, these worked best for me when I was using that board.


You can't compare any air cpu cooler with DI no matter how great it is. Dry ice is -78°C.

Even 1.65V is too much for this cpu on air, better stay in the 1.55V range.

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...