Jump to content
HWBOT Community Forums
Massman

IB-E 4930K/4960X Batch and Serial Numbers

Recommended Posts

That Black Edition is a monster for memory overclocking :eek:

 

How big is the difference with the regular Extreme ?

 

You know PJ, I don't have one to test anymore, but I think a lot of it is the improved IMC from the Ivy architecture. Just think of the difference from Sandy to Ivy memory clock wise.

 

Regardless every IC has been so easy to run in quad channel as long as you have decent kits. Still have BBSE to test but I think 2600 8-11-7-22 should be doable which should be very strong for any 3D benching.

  • Thanks 1

Share this post


Link to post
Share on other sites

had anybody test PSC @ 1300/1333 7-9-7 ? make any different or is the ram clock the key and not the latency of CL7 for 3DMaek 11,Vantage and so on

Share this post


Link to post
Share on other sites

I7 4930K cine 5ghz@1.496v ss -40 / 5.2ghz@1.62v cascade -102

batch 3327A694 :-(

and 1300mhz memory no go

psc bad bad

samsung ok

dont test others bz I cried... :-)

Edited by T.Rex

Share this post


Link to post
Share on other sites

4930k retail

 

batch# 3332B065

 

4650 6/12ht vantage cpu test 1.43v/water

 

boot 4700 and 4800 6 core /12ht but unstable for vantage

 

5 ghz 2core 1.5v for 32m

imc 1400+cl9-12-12 32m

Share this post


Link to post
Share on other sites

4960X ES - 3320A573

 

4500MHz Cinebench R15 @1.13V

 

xgEvxpCl.jpg

 

4750MHz Cinebench R15 @1.3V

 

rxXkyNBl.jpg

 

 

config @cold air with watercooling

 

BmJMUp5l.jpg

Share this post


Link to post
Share on other sites

That's a 6Ghz CPU easily JB if it scales with cold and voltage :) my CPU needs 1.42 for 4600GHz CB

Edited by Leeghoofd

Share this post


Link to post
Share on other sites

Ahah Sam always the eye for details. :P Yes it is probably too much, never tried these 4 modules together and i didn't want to worry about that.

 

I still have 7 cpus from this batch to go through so i will see if i was lucky with the first one.

Share this post


Link to post
Share on other sites

Darn Allen can you imagine JB will just use it to render new animations for the upcoming Kingston commercial...

 

While we can use it's real power :)

Share this post


Link to post
Share on other sites

Picked up a 4930k from Microcenter Yesterday.

batch #3326B667 it did Pretty damn well

 

4.7ghz at 1.37v on a H100 Temps Sit around 65-70C Full Load with Prime

These puppies overclock better when you raise the BLCK instead of just going Multi only.

 

I Ran Prime95 for 3hours and ran 100 runs on Intel Burn test, Dont know if its 100% Stable but this is enough for me.

Edited by Raizel

Share this post


Link to post
Share on other sites

...just got my 4960X 24 hrs ago, so not too much testing / setup yet...batch #3325A993 ...boots into Win7 fine at 5GHz / 1.42v...also seems to like strap 166; will do 4.833Ghz / strap 166 / DDR3 2666 Cinebench R15 at 1.38-1.4v

 

http://valid.canardpc.com/cjjxw7

 

http://valid.canardpc.com/hzu8an

 

QUESTION / Help please:

At 16GB of DDR3 2133 / DDR3 2222, VCCSA and VTT on 'auto' in RIVE use only about 1.0v to 1.05v...but at DDR3 2400 and DDR3 2666, VCCSA and VTT go up to 1.25v to 1.3v...

 

...with SB-Es / C2s anything more than 1,2v was considered quite bad for longer terms survivability by some...can't find any ""safe"" max values for VCCSA and VTT published for Ivy-E, though have seen several reviews where those can run up to 1.4v, ie w/64GB of RAM...any ideas / links ? TX !

Share this post


Link to post
Share on other sites

lucky man, thats a chip with some serious potention..

 

My chip runs 2800 mem with 1.15V on I/O en SA. I don't feel like using more then 1.2V too, so better tweak it to the lowest stable voltage.

Share this post


Link to post
Share on other sites
...just got my 4960X 24 hrs ago, so not too much testing / setup yet...batch #3325A993 ...boots into Win7 fine at 5GHz / 1.42v...also seems to like strap 166; will do 4.833Ghz / strap 166 / DDR3 2666 Cinebench R15 at 1.38-1.4v

 

http://valid.canardpc.com/cjjxw7

 

http://valid.canardpc.com/hzu8an

 

QUESTION / Help please:

At 16GB of DDR3 2133 / DDR3 2222, VCCSA and VTT on 'auto' in RIVE use only about 1.0v to 1.05v...but at DDR3 2400 and DDR3 2666, VCCSA and VTT go up to 1.25v to 1.3v...

 

...with SB-Es / C2s anything more than 1,2v was considered quite bad for longer terms survivability by some...can't find any ""safe"" max values for VCCSA and VTT published for Ivy-E, though have seen several reviews where those can run up to 1.4v, ie w/64GB of RAM...any ideas / links ? TX !

 

 

We have similar fpo/batch. (mine is 3325A911)

 

der8auer also has (had) a similar one.

 

Ours are 4930k though.

 

I can cinebench @ 4.9 with 1.38 volt watercooled.

@5Ghz i need +0.12 volt and temps are raising fast.

 

I need less than 1.2 volt (s.a.) for 3000 Mhz superpi32m

 

But every cpu (and imc) is unique and yours might need some extra voltage for high mem clocks.

 

I believe that anything under 1.20 for both vtt and sa , is supersafe.

Share this post


Link to post
Share on other sites

Thanks guys - ...started to play with some of the RIVE settings (it's early Saturday with a Pacific rain storm warning, good timing :-) )

 

...DDR3 2333 now has VTT at 1.0v and VCCSA at 1.05v with Cinebench R15 passes

 

...DDR3 2666 is what I'm working on now; 'capped' VCCSA and VTT at 1.2v in BIOS and it also passes Cinebench R15 and may have more room to lower them...while strap 166 works fine, I'm using strap 125 to dial in as I'm used to that one from tuning my RIVE Bios / SB-E

Share this post


Link to post
Share on other sites

3331B507

 

looks good. 5 GHz boot 1,460 V 6C12T.

 

4,7 GHz 1,35 Volt primestable.

 

Will test on LN2 tomorrow. Should do 5,8 - 5,9 Benchstable.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...