Jump to content
HWBOT Community Forums

Phenom ii X4 965BE + M2N-E : 5.4Ghz @ Stock cooler


bobenjanneke

Recommended Posts

Hi there,

 

First of all, I'm new here.

I hope this post is on the right place.

 

I'm running a M2N-E, x4 965BE and 3GB pc6400 at a stock cooler.

The whole thing is build in a Corsair 750D.

 

I am just playing with my settings in the bios, and put the frequency at 200 and the multiplier to 27.

So its running 5.4Ghz.

What program can I use to look it is stable?

 

Thank you for your answers!

 

Greetz

Link to comment
Share on other sites

It's no problem you won't believe me, but it's real:

 

http://support.asus.com/cpusupport/detail.aspx?SLanguage=en&p=1&m=M2N-E&cpu=Phenom%20IIX4%20965%20(HDZ965FBK4DGM),3.4GHz,125W,rev.C3,SocketAM3,Quad-Core&pcb=ALL&sincebios=5001&memo=Due%20to%20Bios%20ROM%20size%20limitation%20remove%20LAN%20PXE%20ROM%20and%20change%20Crashfree3%20to%20Crashfree

Edited by bobenjanneke
Link to comment
Share on other sites

  • 3 weeks later...

Try a program called OCCT, if you can run the default stress test for 30 minutes you are golden. Don't run for hours on end as you will burn out the VRM's on the board, few games are likely to stress your cpu and memory as much as OCCT.

 

Keep an eye on your temps you don't want the CPU much over 60 degrees C because the VRM's will probably be at least 5 degrees higher. At 5.0ghz I doubt your 965 will run OCCT for 2 minutes, but it might run a few benchmarks like Cinebench.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...