Jump to content
HWBOT Community Forums

G.Skill Flare and Eco (PSC)


Recommended Posts

  • Administrators


I am cutting down my stock on mems again




1. 2x2GB G.Skill Flare 2000 7-9-7-24 1,65v


Some of the best PSC I had over the years, doing 2600 8-11-8-28 around 1,76v on Gene5, also tested for hard timings on Z77 at 2600 8-12-8-28 1,77v, they also do trcd11 on haswell.


flare-eco285si4.jpg 104032m13008-11-8-282tsufl.jpg flare13018-12-8-2817740kq2.jpg flare12008-10-8-281613trgg.jpg


2. 2x2GB G.Skill Eco 1600 7-8-7-24 1,35V


I bought three kits for 24/7 use but only need two, as these are all X-PSC I decided to sell the best kit, maybe someone needs good value PSC, tested for 1200 8-11-7-28 1T 1,69v on Z87 and also used for some 3ds tests on Z77 where they showed similar results. Should be able to do 1300 on the right rig, I tested these with memtest and they needed a bit above 1,8v for 2600 7-12-7-28


flare-eco476ssr.jpg eco2400c8uau3b.jpg


Prices excluding shipping in Euros

1. 170 Euros sold

2. 50 Euros sold and already paid


Paypal (non CC) and Western union are preferred means of payment. It is only a deal when I confirm it :) - items are located in germany, so EU is best option for me and potential buyer, please ask for shipping cost if you are unsure about these, they will be between 7.50 Euros up to 12 Euros with insurance and deutsche Post, DHL is more expensive.



Disclaimer: no returns, and no warranty or guarantee provided by me as seller, but the items are fully working and tested

Edited by websmile
typo and flare on hold
  • Like 1
Link to comment
Share on other sites

This topic is now closed to further replies.

  • Create New...