Jump to content
HWBOT Community Forums
AgreSor

Amd VS Intel

Recommended Posts

No real preference here. I buy the one thats gives good performance for value, and doesn't dissipate too much heat. I really hate noise. :)

 

Currently I own a E2160, previously an Athlon 64 MT-36 and I still have my XP1700+ 'tbred-b'. All very 'cool' processors. :)

Share this post


Link to post
Share on other sites

I go with whatever offers the best Bang for my Bucks. Recently its been Intels though, the last 5 CPU's I've owned have been Intel's (Core Duo T2600, Core 2 Duo T7200, E6400, E6600, E6700). Currently using an E6400 because I sold my E6600 and E6700. Before Core Duo's I had been with AMD's for years.

Share this post


Link to post
Share on other sites

i've owned 1AMD and 5 Intels. i like intel no FanBoy but i find they are just better

 

AMD xp 2900+

Intel Celeron D 2.4Ghz

Intel Pentium 4 3.0Ghz

Intel Pentium D 920

Intel Celeron D 365 (OC to 4.7GHz)

Intel E6550 (get this tomorrow, cant wait)

Share this post


Link to post
Share on other sites

Intel for now.

 

No stupid cold bugs with -100'c, no problems with htt, better performance, can take more volts, no problems with high mem overclocking etc. Now amd are for ladies and "aircooled" ocers :D .

 

In my daily rigs I have P4 631 with HT (4-4.2ghz 1.15v passive, great performance/heat/price) and undervoltaged PM 1.4GHz in laptop. I'm not playing games, so I don't need better ones ;) .

 

My current cpus: Celly 352 (@7.9GHz :D LN2 ), P4 631 (@~7GHz with cascade), P4 631 ES, A64 2800+ (propably broken), Celly 420, E4400, P3 1GHz.... duron 750MHz :D, and few <500mhz .

Share this post


Link to post
Share on other sites

i like both :D

 

currently i have used more AMD chips than intels

  • PD 930 (no oc cause the mobo=gay but its a HTPC so i dont care)
  • celeron D 351 @ ~3.8ghz 24/7, 4.2ghz max on a ECS P4M800-pro i would go higher but i'm capped at a +.03v to the cpu and its for my sister so it really doesn't matter
  • AXP 2000+ tbred on a MSI K7N2-delta (went boom some time ago)
  • 3000+ newcastle CG max oc 2.59ghz @1.81v (tried up to 2v with no increase in oc) on a Machspeed K8M8MS r2
  • 3400+ clawhammer C0 @2.35ghz 1.56v 24/7 on a machspeed K8M8MS r2 (replaced my 3000+ and outperforms it @ 2.35ghz vs 2.59ghz)
  • 3000+ venice still sitting in a box waiting for the pci-e vid card i ordered to show up on a DFI infinity ultra this should do 3ghz+ on air

 

not much money as you can see so there all low end chips but i do my best getting them to run todays apps/games my 3400+ ran crysis when i mated it with a BFG 7800GS OC @ all med/high 1027x768 :D

 

 

No stupid cold bugs with -100'c, no problems with htt, better performance, can take more volts, no problems with high mem overclocking etc. Now amd are for ladies and "aircooled" ocers :D .

 

no cold bugs on my chips...and i doubt any intel chip can run @ 2v vcore and survive

Share this post


Link to post
Share on other sites

from the beggining to the end...

 

amd athlon xp 1700+

 

amd athlon xp 2500+ (barton core)

amd athlon xp 2600+ (barton core)

 

trade athlon 1700 with an athlon xp 2000+

 

amd athlon xp 2800+

amd athlon 64 3400+ (laptop)

sell athlon 2000+

sell athlon 2800+

 

intel core duo 4300

intel pentium 3 600mhz !

 

that's my story

Share this post


Link to post
Share on other sites

My history:

 

AMD 486DX2 40MHz

Intel Pentium 120MHz

Intel Celeron 333A

AMD Athlon (T-bird) 900MHz

AMD Athlon XP 2100+ (T-bred B0)

AMD Athlon XP 1700+ ( - || -)

AMD Athlon XP 2500+ (Barton)

AMD Athlon XP-M 2400+ (- || -)

AMD Athlon 64 3000+ S939 (Winchester)

AMD Opteron 144 (Venus)

Intel C2D E6300

Intel C2D E6400

Intel C2D E6600

Intel C2D E6700

Intel C2D E2140

Intel C2D E8500

 

That's my history i guess, i had few more chips for a shorter period of time, those listed i had for at least half a year.

Share this post


Link to post
Share on other sites

I prefer Intel !!

In the past I had an AMD processor X2 3800+...now I have Q6600 G0 processor and I am very satisfied !!

Share this post


Link to post
Share on other sites
Has anyone played with the phenom B3 yet?

 

not yet but from what i ve seen its same crap lol

Share this post


Link to post
Share on other sites
no cold bugs on my chips...and i doubt any intel chip can run @ 2v vcore and survive

I want too amd non coldbugged chip!:D

 

Has anyone played with the phenom B3 yet?

crap, -30 at evap and cannot boot at stock freq:banana::banana::banana:

Share this post


Link to post
Share on other sites

well my story:

 

intel pentium 133MHz

amd k6 180MHz

amd k6-II 300 MHz

amd k6-II 500MHz

amd duron 800MHz

intel pentium 3 1GHz

amd athlon xp 1800 1,5GHz @1,8GHz OC

amd athlon xp 2800+ 2,2GHz @2,5GHz OC

amd athlon 64 3800+ 2,4GHz @2,6GHz OC

amd athlon x2 4600+ 2,4GHz @2,65GHz OC

amd athlon x2 6400+ 3,2GHz @3,4GHz OC

 

and seriously amd had better times than yet^^

but im fine with my x2 6400+..maybe i will buy a phenom x4 9850

or a intel c2d q6600 i dont know yet^^

Share this post


Link to post
Share on other sites

My story:

AMD Duron 800MHz@ 1200MHz

AMD Athlon 1400MHz@1700MHz

AMD Athlon XP 1800+ @ 1640MHz

AMD Sempron 2600+ @ 2520MHz

AMD Turion 64 MK-38 @ 2681MHz

AMD Athlon X2 4000+ @ 3.2GHz

Intel Celeron Willamette 1,7GHz @ 2.5GHz

 

AMD and Intel - good CPU's. I like Athlon, Sempron,..., Celeron, Pentium, and over CPU's.

Share this post


Link to post
Share on other sites
I want too amd non coldbugged chip!:D

 

 

crap, -30 at evap and cannot boot at stock freq:banana::banana::banana:

 

so much for non-coldbugged chips my single cores were fine frozen but the duals/quads are annoying now i have

 

phenom 9500 @2.84 under water

5000BE 3.5ghz under water

celly 430 2.4ghz stock volts (stupid ECS mobo again)

e7200ES unknown top right now cause i think my 780i is DOA

Share this post


Link to post
Share on other sites
now you have the coldbug free Phenom II chips. AMD FTW

 

I think you just put MaSell's foot in his mouth..

 

-200C + and still no coldbug..

Share this post


Link to post
Share on other sites

Hey bro Welcome to the forum! I have a 5600+ here. For a 24/7 system, I love it. Id be willing to give up a chunk of performance for AMD purely because of AMDs mounting mechanism!!

Share this post


Link to post
Share on other sites

AMD k6 350

intel celeron tualatin 1.1GHz@1.33GHz

AMD X2 4600+ EE@2640MHz (first Windsors F2 :( )

AMD X3 8650@2740MHz (bad motherboards-nVidia chipset, not possible higher than 240 busspeed )

now: AMD X4 955@3895MHz (stable of course with aircooling)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...