Jump to content
HWBOT Community Forums

aGeoM

Members
 View Profile  See their activity

  • Posts

    63

  • Joined

  • Last visited

 Content Type 

Posts posted by aGeoM

    aGeoM - Radeon HD 6950 @ 1025/1425MHz - 166206 marks 3DMark03

    in Result Discussions

    Posted · Edited by aGeoM

    :) Yes they are, I'm working on that, for now I just removed points achieved., soon submission will be edited with good run results. I now how hard is to get good results, and I respect the work of others. I was not present in the run moment, and when I arrived the computer was ok every thing seamed normal, and I published, only when I saw the 1st position I realize that something was wrong. Don't worry will be fixed in a couple of minutes.

    Be well....

     

    Edit: I can not resubmit seams it is blocked or deleted.

    aGeoM - Radeon HD 6950 @ 925/1450MHz - 2699.96 DX11 Marks Unigine Heaven - Xtreme Preset

    in Result Discussions

    Posted · Edited by aGeoM

    Another bugged run.

     

    There's no way your scores are that high. That CPU is pathetic against 2600Ks and so on. It's much higher than my 4770K at 4.7GHz and one of my dual HD 6950s at 925MHz on the core - http://hwbot.org/submission/2521260_themaddutchdude_unigine_heaven___xtreme_preset_2x_radeon_hd_6970_2325.07_dx11_marks (my result)

     

    It's just not possible, whatsoever. Your result shouldn't even be close to my single run, let alone destroy mine and Smoke's who had his card at a much higher speed and his CPU decimated yours too.

     

    You should be getting around 1000 points, if not less.

     

    http://hwbot.org/submission/2523757_themaddutchdude_unigine_heaven___xtreme_preset_radeon_hd_6970_1053.81_dx11_marks (my result)

     

    My dual is plus 4K http://hwbot.org/submission/2522318_ageom_unigine_heaven___xtreme_preset_2x_radeon_hd_6950_4347.42_dx11_marks

     

    I`m trying uploading a video, don`t know if a can, 800MB file to youtube 1067 minutes remaining.

     

    Edit:

     

    After reciving feedback from the creator`s tool, the Enhanced is not allowed for HWBot submissions, the results will be removed.

     

    Thanks to all.

    aGeoM - Radeon HD 6950 @ 925/1450MHz - 2699.96 DX11 Marks Unigine Heaven - Xtreme Preset

    in Result Discussions

    Posted · Edited by aGeoM

    Reported.

    Sorry but your score seems to be really strange.

    The score done by Smoke with 2600K@5900 and VGA@1300/1540 is only at 2129 Marks !!!!

     

    It`s OK, no hart feelings taken. You do what do you think you should do. I`m aware of the strangeness of the result, but is a tweaked result not a raw power or even less a bugged one.

     

    Have hundreds submissions never submitted a bugged result. I do overclocking for fun.

     

    Be well

     

    Edit: This is the best I can do, with this system, Phenom II 965BE @3700, ATI HD7870@1100/1600, forced resolution 1080P by Catalyst CP (native res. supported is 1360x768), can clock higher with fans@full but this is my bedroom PC, wife and baby sleeping.

     

    http://hwbot.org/submission/2525423_ageom_unigine_heaven___xtreme_preset_radeon_hd_7870_(pitcairn_core)_2950.52_dx11_marks

    Moved to Xtreme OC

    in Support

    Posted · Edited by aGeoM

    Hi

     

    I was moved to Xtreme OC without any Xtreme cooling used. I only have Air and H2O cooling systems. Please check.

     

    Thanks.

     

    Edit:

     

    I just realized that I had 2 submissions with wrong cooling settings, already edited to set it correctly.

    The official HWBOT OC Challenge June 2010 thread.

    in HWBOT Competitions

    Posted · Edited by aGeoM

    Ouh, this looks bad. So basically, you're changing the NB clock in windows (which is impossible since change NBclk needs hard reboot) and all application read that it's set like this, so you get an unreal score.

     

    Good catch!

     

    Well, only with Phenom II I realise the "unreal" score before I used the M2N32, with that board NB was set by default to 8x max, so on CPU-Tweak I could change NB 8x to 10x by Apply and Cancel on Reboot message, after many trials, to level the NB default of the Sempron/Athlon II, as we know are locked to 10x.

     

    The "exploid" as chew called, only begans when I was forced to proff that the results are legit, changed board to M3A79-T and later cpu to Phenom II, with unlocked NB first 11 then 12...14 and at last 30.

     

    I removed all my scores now.

    The official HWBOT OC Challenge June 2010 thread.

    in HWBOT Competitions

    Posted

    Yah not saying you actually knew what was happening, however it's very evident now.

    I raised NB with cpu-TWKR to and cpu-z verified it....but it's not real thats where issue lies. Not your fault. You thought it was actually improving your score.

     

    Now that you know however best to redo results :)

     

    LOL... was really improving my scores, the score was obtained by the benchmark, some how it was reading all settings both CPU and memory and calculating from there.

     

    I'm deleting all scores now. You are already in first. :)

    The official HWBOT OC Challenge June 2010 thread.

    in HWBOT Competitions

    Posted

    I could duplicate it but it's not legit....

     

    I suggest you go back and do some legit results with booted NB multi now that it's quite clear that software was bugged.

     

    If there was an actual program like AOD which may work on some boards on the fly.....you would find the inability to lower MRL just as if you booted it :)

     

    well.. chew, I'm not submitting results, any more, only here, with the intention of clarifying whats happening, CPU-Tweaker allow you to change NB freq, CPU-Z reads, MaxMEM acts as if NB is setting at that speed. You can see by looking to all my results that, in some I raise NB and CPU voltages bcz I was convicted that NB was running at that speed, and since I reached 10x limit I went HT ref route. AOD it's a fine tool, but if you change values there, like NB or HT and some in the memory page, it sets in BIOS to AUTO, insted os MANUAL, and we have to redo all the settings, HT Ref and some voltages...

     

    About you Vista x86, you have to do the right steps to NB get read by MaxMEM, and I'm not sure but all AM2+ and AM3 board can change NB On the Fly w/ CPU-Tweak.

     

    Any way be legit or not, using a software tool to change settings, I will remove my DDR2 and DDR3, for you please, not because I consider I was cheating or using exploids witch I was not, just used a tool in some cases required as validation (MEMSET/CPU-TWEAK) like any other tool (SPI Tweaker, A64Info, K10STAT, etc) you/we use to do your/our benchs.

    The official HWBOT OC Challenge June 2010 thread.

    in HWBOT Competitions

    Posted

    the problem is GEO if your not understanding is your not actually at that NB speed you think you are.........Windows however thinks you are.

     

    Combined with the low MRL with the NB speed windows thinks you have it is impacting the bench.......call it an exploit or call it a cheat but your NB is not applying I am looking in bios.......it's bot applied.........I'm in vista 32........although it says i'm at 2700 NB right now vista 32 is not tricked and performance is that of 800 NB which is what is set in bios ;)

     

    Now I know it's not possible my system is running at NB 4700, I booted many times at NB +3000 with sempron and Athlon, meanig 9x or 10x multis.

     

    Both x86, x64 Win7s applied the NB setting in CPU-Tweaker, the first time I didn't realise what was triggering NB. Only with time I realised that setting NB first and then the timings, MaxMEM was performing faster. Found max NB, then was just playing with sub-timings, far from my mind to be cheating or something similar.

     

    But you can duplicate my fiddings, just do the NB tweak, with multi-core, set affinity to one core.

    The official HWBOT OC Challenge June 2010 thread.

    in HWBOT Competitions

    Posted · Edited by aGeoM

    There is no exploit, just do what I say and you will see, only now testing an Black Edition I can go over 10x in NB w/ CPU Tweak.

     

    Here's the last one, this time I set in BIOS NB@ 6x to force lower MLR (39) and then changed NB as I explain to you to 14x.

     

    screenshot14d.jpg

     

    For some reason I don't know MaxMEM is acting as if I was at 4700, but results are consistent.

     

    EDIT

     

    Well, Why not go for extreme NB speed 30x... :D

     

    screenshot16r.jpg

    The official HWBOT OC Challenge June 2010 thread.

    in HWBOT Competitions

    Posted · Edited by aGeoM

    Just send a mail to the coder of the application. Hope he knows what's up.

     

    This looks to be a problem of unsupported architecture. We had the same issue when the Gulftown appeared.

     

    Hi, I already used 3 CPU's and 3 board's, Athon II X2 250, Sempron 140 and now Phenom II 965, boards are ASUS M2N32-Deluxe WE bios 5001, ASUS M3A79-T bios 1203, and ASUS Crosshair IV Formula bios 903.

     

    Still playing NB and MLR and the last score is 1862.7 picture in a minute. LOL

     

    screenshot9h.jpg

     

    Uploaded with ImageShack.us

     

    [EDIT

     

    http://cid-8828d15347fc782f.office.live.com/self.aspx/.Public/HWBOT/959l1730^_dc5501cc^_MaxxMem2.save

×
×
  • Create New...