Jurin1388
-
Posts
26 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by Jurin1388
-
-
On the MSI Z690 Unify-X board, CrossFire works under Windows XP without any problems. The motherboard supports x8/ x8 in SLI and CrossFire mode.
-
2x HD 4870 AIR Cooling.
-
-
CPU 5.7 GHz/6 cores.. AIO Cooling.
-
The AIO cooler is loosely seated on the CPU, it is not bolted, but is only loaded with a 1KG weight. I do this for most tests. It's a quick way, I don't have to assemble anything.
-
I still don't know where the problem is. Probably something with the CPU. None of the boards go above approx. 5.6-5.7 GHz.
-
On 7/30/2021 at 1:29 AM, d0minat0r said:
https://drive.google.com/file/d/1BvruGhGEHNlD0KmKmr2fgeFr2Q_-pheJ/view?usp=sharing
here is link from GdriveCan't open this file. Message to Gdrive: Sorry. You do not have access to this document because it is in violation of our terms and conditions. Can you help? -
On daily cooling it behaves like any other regular CPU. During 1,35V with AIO cooling it works on a frequency of about 4700 MHz. With higher frequencies it needs higher voltage and that leads to overheating and lowers performance.
-
Have you tried painting PCB with non-conductive Vaseline?
-
It is true. At 1.58 volts, the processor was able to run at 5700 MHz on all cores. At this frequency result Cinebench-R23 14852 CB.
-
It is just an avarage CPU . I tested a processor with AIO cooling. It worked on all cores (8/16) with a maximum frequency of 4650 to 4750 MHz.
Results with AIO cooling in some tests below.?
-
-
Zkouška. Málo LN2. Teplota CPU -10
-
Thanks for the tip. I'll try it later ?
-
21 hours ago, davestarrr said:
nice
Thanks Dave☺️
-
8 hours ago, flanker said:
how much vcore?:)
The Vcore was very high- 2.0 volts. Validation at 7950 has already failed. 7900 MHz was on two cores. -
Určitě pomohly, díky moc. Jen ten 8700K se mi nedaří... 3x přepastované a nenajede přes 5600 MHz. Asi nebude v pořádku.
-
Souhlasím, CPU je sice nově přepastován kryonautem, ale včera jsem skutečně najel přímo na fullpot. Příští týden znovu přepastuju a zkusím znovu. Díky.
-
Je tam kryonaut, ale budu zkoušet znovu (bylo málo LN2).
-
Tak to budou asi obě ty desky Maximus IX APEX i Maximus XI Gene KO, neboť jsem je zkoušel teď v létě- teplota venku kolem 25 °C... Ten test s 8700K jsem zkoušel i na XI Gene a dopadl podobně . Nedostal jsem se s CPU přes 5400 MHz..
-
Bad test- slow mode on board instead of ln2 mode !!
-
Bad test- slow mode on board instead of ln2 mode !!
-
Bad test- slow mode on board instead of ln2 mode !!
-
Thanks, I didn't use any OS optimization. But I already found the answer in the forum: https://community.hwbot.org/topic/167622-spi32m-help-needed/. I'll try waza later. Thank you once again.
Jurin1388 - 3x Radeon HD 7970 @ 1046/1475MHz - 287098 marks 3DMark03
in Result Discussions
Posted