Mayo_naise - GeForce 9500 GT DDR2 @ 900/630MHz - 7851 marks 3DMark06

[Exabyte]

Hi, nice result :) Could you share some pictures how you volt-modded the card? I also want to try it on this card, but I don´t know where I have to solder the vr´s on.

[Mayo_naise]

@Marco: Sry, Card is already build back to normal. On mine is a APW7068 PSU IC. Just add a variabel resistor between pin 4 and Gnd. I used a 20k Trim Pot. Also i removed the current limiting Resistor (OCSET, pin 8) and replaced the Main inductor because mine was hearable saturated (which causes more current draw). Was my first attemp with no Software tweaks. With this modifications the Card can do a lot more if it works. Since mine started to fail when bent (even on base clock) i didn't try to push it further or spent any more time on it. If you need more Infos or help make a topic in the Forum so i can answer there :)