gioy86 - Core i3 12100F @ 5666MHz - 60641 MIPS 7-Zip

[Muut]

how are you cooling 1.61v with an AIO and only getting 87°C ? I was already hitting 78°c with 1.51v(set) on my 12100 using custom loop with triple D5 pump and 4°c water.

[gioy86]

Cpu-z read 1,61v, but in bios and via atuning tool i set 1,55volt. My board has a big difference from real vcore and read vcore. I bench only with aio (bequiet pureloop 360), and in past with a noctua.

Edited March 12, 2024 by gioy86

[mcmanus9442]

1 hour ago, Muut said:

how are you cooling 1.61v with an AIO and only getting 87°C ? I was already hitting 78°c with 1.51v(set) on my 12100 using custom loop with triple D5 pump and 4°c water.

CPU-Z voltage is usually always off. I've asked the same question before. Ryzen 8000 series is even worse. Benchmate shows 2.55+ V, but CPU-Z will show close to actual values. Dont trust anyones voltages unless its a HWInfo Screen.