G81
-
Posts
54 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by G81
-
-
Oh, okay, interesting. So the one in my thread is rev1.0 and the ADP4100 is rev2.0?
Yep your Tapic for Rev 1.0 and its work fine on TO card not Oc
For OC card there is driver problem when you upgrade bios driver dont detect the vga card i think it have little problem with some code !!
but this one work fine on Rev2.0 i still wait for ln2
-
there are so many different between this two card that use chil 8228G and this use ADP4100 and its lot different between this card and modding not work not OV tools work for it
-
Hey guys
****** Please DO THIS AS YOUR OWN RISK *******
You may have problem same as me to set voltage on 7970 OC Rev 2.0 the software program dont support to set voltage
i buy two card one is rev 1.0 and another is rev 2.0 lot of different between this two
here is the pic
rev 1.0
rev 2.0
i get confused when see the difference .... any way here is hard mod for OCP And Vcore
You Can Read Vcore from Phase at back of the card and any way you can set 50K Vr for Vcore too nothing change and you have fast Vcore up
For me its work Ok without problem soon share result
i Edit bios Too for more stable on OC and can make higher Frequncy with same voltage Pm me if any one want bios
Share Result here Soon
-
-
Need better cpu - card full mod after this result but wait for better cpu
-
-
Thanks I just test Cpu for 3D not Bad yet more on tomorrow
-
-
@Vivi : Not yet its 1.33
@Olesius : Thanks Men
---------------------------------------------------
Need Better mobo Have problem on the temp -165
-
we have many of these in our country.
wtf!!!!
1.2 vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
we have only 50 pic as i know and all fly Good Go a Head Goddy you have your chance
-
that Looks Verry Good !!
What Batch Is This ?
L221a971
-
1
-
-
-
You Run without tweak but fast i Run full tweak but best is useless:D
-
S3 for Z77X-UD3H and S2 for UD5H, no faith in official biosses on these boards
Thanks men
-
Witch Bios Good For GA-Z77X-UD3H ?
-
I had one - shit
L221a971
#1 : Pass 32m 4core with HT @ 1.4 - no Different 4-4 or 2-2
#2 : fail
#3 : fail again
#4 : Pass 32m 4core with HT @ 1.39 - no diffrent 4-4 or 2-2 core
Last One : Pass 32m 4Core with HT @ 1.38 - and on 2-2 Core can done 32m on @ 1.34
Mb > UD3H
-
any detail about L221a971 ?
-
-
Thanks to Mr.Pejman we know about this and there is no problem i will ban him form our team - i dont know whats happen but hope not see this again --we are just like brother and we should forget all the past problem.
btw here the score that he copy hope ban soon : http://hwbot.org/submission/2261967_metalracer_3dmark11___performance_2x_radeon_hd_7970_20637_marks/
-
Good Job bro do it As well
-
N3634027
A2633
pcb cod: 1df6622 01
-
@TAPAKAH : i lap my last 10 cpu i can only send you the pcb detail if you want let me know i will share it here
-
-
a batch would be nice
same old cpu only board different and more stable pas 7.6 @ super pi 1m and can boot to windows @ 7.65
Volt Mod And OCP mod GV-R797OC-3GD Rev2.0
in Extreme overclocking
Posted
You have your own chance mine is not bad
-----------------------------------------------------
Here is the result :
Pic modding
System :
3770K - 215A971
MVE
Gigabyte R797OC-3GD rev2.0
Gskill Pi
And the Result
3D mark 03 - CPU @ 6420
3D mark 11
VGA not Stable on 11 yet i dont know why there is no different in frequency (Stock or OC) windows fail or break resistor on die ( i dont know when it happen),,,,
Any way i find my pot break 4 resistor on the VGA die hope Rma replace it