[ROG Crosshair VI]

Hi there Elmor,

 

Since I installed M.2 drive im getting DRIVER_POWER_STATE_FAILURE (sometimes). Tested the m.2 drive on Intel pc and its working fine (Samsung 960EVO). Could it be a driver problem? or is something related to the bios?

 

Probably setup related that is the same SSD I used in the build I posted earlier and it runs into windows with no issues with BCLK all the way up to 148mhz.

[ROG Crosshair VI]

Let me guess - you're benching 2D with high-end current-gen VGA. Try another VGA that can handle increased PCI-e clocks.

 

That really depends on card. I did all of my testing with a 1070. BCLK was fine all the way up to 148, 2D/3D benchmarks.

[ROG Crosshair VI]

That is wrong,till 104.85 you have pci-e 3.0,then the pci-e drops to 2.0 but the pci-e clocks is still synced to REFCLK.

 

Finishing my tests with Crosshair VI,limit here is 152 refclock(which is suicidal for some benches) however 150.77 could run realbench no problems.

 

Also for @chew,VDDSOC might help when on on the edge of stability,for example in my particular case i did memtest DDR4-3550 14-15-15 which was attainable only after raising VDDSOC to 1.25,1.15 was instant fail and 1.20 failed like 10% progress. I don't know how safe this is,however imc showed no sign or degradation whatsoever after this session.

 

https://abload.de/img/snaphsot0040a7szh.png

 

https://abload.de/img/snaphsot0011acs0k.png

 

I have been pushing 1.3v through the VDDSOC for the past week or so to keep >3600 stable on my -b's. I have tested as high as 3800 with 0702, I was unable to keep those speeds with 1001/0038. I have not seen any noticeable degradation of the IMC. The chip itself seems to be good for ram, the other one I was testing with wouldn't push the same ram over 3300 regardless of voltages.

[What to buy for USD $1049.99]

I mean if they hit the market like the hype train has them it is a valid point. Here is to hoping they break the cycle. I could do for a 6950x in the $500 range.

[How do these CPU's need to be submitted]

I have purchased a set of opteron ES chips (ZS252145TCG44) They do not match a retail chip available (2.5ghz, 3.2ghz boost) They would be an opteron "6236" if it was ever sold.

 

[The official TPU HWBOT Competitions thread.]

There has been a question about number of cards popping up as well. This is a single card competition, no SLI.

[cdawall - Phenom II X4 B97 @ 4805.2MHz - 4805.22 mhz CPU Frequency]

Forgot the photo of the rig.

 

[Processor specification request]

A couple more business class processors to add since you already got the Phenom II X4 B95

 

Phenom II X4 B93

 

http://www.cpu-world.com/CPUs/K10/AMD-Phenom%20II%20X4%20B93%20-%20HDXB93WFK4DGI.html

 

Phenom II X4 B97

 

http://www.cpu-world.com/CPUs/K10/AMD-Phenom%20II%20X4%20B97%20-%20HDXB97WFK4DGM.html

 

Phenom II X4 B99

 

http://www.cpu-world.com/CPUs/K10/AMD-Phenom%20II%20X4%20B99%20-%20HDXB99WFK4DGM.html

 

Phenom II X3 B73

 

http://www.cpu-world.com/CPUs/K10/AMD-Phenom%20II%20X3%20B73%20-%20HDXB73WFK3DGI.html

 

Phenom II X3 B75

 

http://www.cpu-world.com/CPUs/K10/AMD-Phenom%20II%20X3%20B75%20-%20HDXB75WFK3DGI.html

 

Phenom II X3 B77

 

http://www.cpu-world.com/CPUs/K10/AMD-Phenom%20II%20X3%20B77%20-%20HDXB77WFK3DGM.html

 

Athlon II X2 B26

 

http://www.cpu-world.com/CPUs/K10/AMD-Athlon%20II%20X2%20B26%20-%20ADXB26OCK23GM.html

 

Athlon II X2 B28

 

http://www.cpu-world.com/CPUs/K10/AMD-Athlon%20II%20X2%20B28%20-%20ADXB28OCK23GM.html

 

Athlon II X2 B30

 

http://www.cpu-world.com/CPUs/K10/AMD-Athlon%20II%20X2%20B30%20-%20ADXB30OCK23GM.html

[cdawall - Athlon X2 L310 @ 1573.3MHz - 1573.26 mhz CPU Frequency]

Tossed some quick ones in.

[Processor specifications requests : opteron 8350]

Ticket ID: 1170

 

Priority: Low

 

couldn\'t find one only chips i saw in the listing opteron 8354/56/57\r\n\r\nhttp://img.techpowerup.org/110126/opteron2310.png

[Bug reports : no points?]

Ticket ID: 935

 

Priority: Low

 

http://hwbot.org/community/submission/867915_cdawall_cpu_z_phenom_ii_x4_910_4485.31_mhz\r\n\r\nWhy isn\'t this ranked its been a couple of days? I updated from my 4062mhz score

[Processor specifications requests : AMD Sempron X2 2X00]

Ticket ID: 805

 

Priority: High

 

Please add \r\n\r\nSempron X2 2300 2.2ghz \r\nhttp://valid.canardpc.com/show_oc.php?id=574233\r\n\r\nand Sempron X2 2200 2.0ghz \r\nhttp://www.newegg.com/Product/Product.aspx?Item=N82E16819103826\r\n\r\nsherman core ie cut down brisbane both have\r\n2x256KB L2\r\n1.35v core\r\nBH-G2

[Bug reports : techpowerup team page wont work]

Ticket ID: 801

 

Priority: High

 

wont work form any team menu also the teams Techpowerup and TechPowerUp! are the same and should be combined into one\r\n\r\nhttp://img.techpowerup.org/100214/Capture023.jpg

[Processor specifications requests : Athlon II X2 250]

Ticket ID: 392

 

Priority: High

 

http://valid.canardpc.com/show_oc.php?id=588967\r\n\r\nhttp://img.techpowerup.org/090619/Capture099.jpg\r\n\r\njust need that little bugger added

[Amd VS Intel]

I want too amd non coldbugged chip!

 

 

crap, -30 at evap and cannot boot at stock freq:banana::banana::banana:

 

so much for non-coldbugged chips my single cores were fine frozen but the duals/quads are annoying now i have

 

phenom 9500 @2.84 under water

5000BE 3.5ghz under water

celly 430 2.4ghz stock volts (stupid ECS mobo again)

e7200ES unknown top right now cause i think my 780i is DOA

[hybrid crossfire]

feature request RB

 

done

 

http://hwbot.org/forum/helpcenter.php?do=ticket&tid=78

[Feature requests : hybrid crossfire/sli]

Ticket ID: 78

 

Priority: High

 

it would be nice to have the ability to select different types of cards for a hybrid crossfire or sli setup\r\n\r\nmaybe just up to 4 places to select cards rather than just one with a spot that says select number of cards?

[hybrid crossfire]

there should be an option to select multiple types of cards IMO that way if you xfire a 3870X2, 3850 and 3870 you not scored unfairly and its not unfair with others

[Fx 5700 Overclocking]

i have a ECS P4M800 now time to find a dirt cheap C2D to do some benchies on going to take the cake

[Fx 5700 Overclocking]

i'm not to far behind all of you using a stock cooled FX5700 and PD930 on a mobo that wont alow overclocking.

 

and thats a bone stock cooled FX5700 with no vmods at all

 

not to mention a dirty everyday use copy of XP

[Processor specifications requests : Turion X2 RM70]

Ticket ID: 63

 

Priority: High

 

http://valid.x86-secret.com/show_oc.php?id=399001\r\n\r\nchip runs @200x10 2ghz i just have cool and quiet enabled

[Videocard specifications requests : HD3200(780G)]

Ticket ID: 50

 

Priority: Low

 

http://gpuz.techpowerup.com/08/07/16/a5r.png\r\n\r\nplease add the onboard HD3200

[3Dmark 2008 'Vantage' - to add or not to add]

i honestly think its nice for people who are on vista and running all of that but its pointless to anyone who cant/wont upgrade to vista as its a POS OS thus my vote is add it but no points

 

 

also 1280x1024 is bloody useless on any high end gpu unless you have a 5ghz intel quad that alienates way more than half of users its bull to loose in a graphics race if you have a higher clocked gpu and better rig in games and other 3d apps just cause your 3ghz DC cant compete with an LN2 potted QX9650

[blocking old results that don't comply to new rules]

i think he is referring to one of the other blocked ones that one is ummm going to get fixed i'm going to force that PD to play nice for some better runs

[blocking old results that don't comply to new rules]

thank you so much