Jump to content
HWBOT Community Forums

ChriscomIT

Members
  • Posts

    14
  • Joined

  • Last visited

Posts posted by ChriscomIT

  1. I can confirm that with beta bios 1.51 my mice not recognized after bootup is fixed. I had the problem that my Steelseries Sensei was not recognized by the system after a bootup with some delay in standby ( longer than 5 minutes ) until i replugged the mice.

     

    So with 1.51 beta bios and my 3 working ram modules the issue no longer persists and after every bootup my mice gets recognized properly no matter how long in standby before bootup. Many thanks for that fix!!!

  2. You had the 04,60,55 debug LED boot loop too with one of your sticks of G.Skill RAM on the Godlike?! I am having this same issue that seemed to appear out of nowhere like the Godlike destroyed one of my RAM sticks... This happened when I updated to BIOS version 1.4 from 1.2 I believe.

     

    Yeah sadly and good to see i am not the only one. But dont talk about that here because its not possible that it can be the Godlike whos destroying ur ram, its the cheap ICs which memory vendors using (just kidding).

     

    And yes u have to get or rma ur kit cuz one of ur sticks is defective now.

     

    I got it that with OCed high end ram there is more likely a fail to happen. But so much people have the same problem on the Godlike that its not just that anymore. Its so fishy....

  3. I can make u plenty of screenshots and things but u would just reject everything. There is enough evidence in the MSI forums. What is the 04,60,55 debug led code reboot loop then??

     

    I just buying a new kit and a new cpu and if they fail again on this board i throw the sh..it out of the window together with my new msi laptop ( jk the GE72 Apache Pro works great hope it stays like that). I never had problems like this with other vendors.

     

    And also i know that u was talking about ICs but i was talking about the IMCs cause u was saying at first it cannot be the ICs, check memtest.

     

    Whatever, u need to look nowhere into cause i am done with this mess. And yeah i have prove that with XMP settings none of my voltages where set correct for my dram (vdimm) and thats why every bootup i had "press F1 OC failed" message. This was related to the ram. With beta bios 1.51 pc is starting with 4 ram sticks populated. No reboot loop but windows is crashing randomly short after bootup because of bad ram stick.

     

    And changelog for 1.4 bios is "- Improved memory compatibility problem.". Ok and u tell people they are not aware of the situation and have no technical knowledge at all? Ok got it! I am done with this.

     

    Btw beeing an engineer at IBM doesnt mean i am a expert in consumer pc electronics but i have knowlegde (advanced) about computers. But hey never talk with a god about things like that. I try to message msi support but i foresee there is the same ignorance regarding this problems. Just because u dont have the problem it doesnt mean others with other configs have not the problem.Have a nice day.

     

    One of the threads: https://forum-en.msi.com/index.php?topic=269740.0 (i add more) look into it and tell me again there is no issue... i have the exact same problem like these people

  4. So pepinorang u say its more likely that the 3000Mhz CL15 settings after around 5 months killed one of my IMCs (5930k IMC should be not that weak...) ? Randomly ? Short after a bios update. Let me recheck this. But this seems all very fishy. Regarding this there are also plenty threads about on the MSI forums where other people complaining about the same. I just say 04, 60, 55 debug code reboot loop with press F1 message cause OC failed. This caused by one ram stick. Without system runs fine.

  5. 1. So at every cold boot it needs to update configurations? Why doesnt the Gaming 9 X99S board act that way? and why is it limited to only when xmp or m.2 pcie is enabled?

     

    2. I shut off the switch on back of the psu after computer shuts down everytime. Been doing it that way for years. Makes me feel safer.

     

    3. The gaming 9 x99s has just as much of a recent ME than the godlike. Not only that my Asus Z170 Workstation doesnt doublepost either.

     

    As far as Im conerned I can turn off XMP and manually set parameters if I have to. To me it sounds like a bug. Wish MSI fix it already.

     

    Thanks.

     

    When i got that right its mainly caused by XMP code getting enabled so turning XMP of and set it manally should eventually help u.

  6. 1) You misread my explanation, Intel ME don't forget these configuration, that's the opposite. Because the saved configurations inside Intel ME might need to be updated, it double post to reset/update/save them.

    2) You are not supposed to turn OFF your PSU each time your turn OFF your computer

    3) Old ME versions didn't have this behavior but with newer Intel ME, ALL the X99/Z170 motherboards share this behavior.

    4) See 1).

     

     

     

    Seems more like a BIOS issue... Anyway as said previously it's the BIOS/MB that controls the voltages (AUTO or manual), not the CPU.

     

     

     

    The full change log is always confidential, but for this one most change are related to Broadwell-E and bug fix. Here is what I can list:

    - Fix system OC fail issue when use Avexir DDR4-3000 CL17 8GB memory and XMP is Enabled.

    - Modify auto adjust DRAM timing related code.

    - Modify auto adjust CPU Base Clock related code when use over XMP 3300MHz memory for Haswell-E CPU.

    - Fix Intel SSD 750 S3 issue.

     

     

     

    LOL, all I can say is re-read my explanation...

    It's not possible and I already explained you why. ;)

     

     

     

     

     

    Double flash is 200% useless unless Intel ME update went wrong or it has been corrupted with BCLK OC, in which case any BCLK change would fail or result in 100MHz.

    Since your memory hasn't been killed by "one of the bios updates after 1.1", which as I explained in a previous post with technical facts to someone else is IMPOSSIBLE; it's probably time to edit or delete your previous post, don't you think? :rolleyes:

    Anyway, if I was you I would still try to run MEMTEST with all modules installed/detected at XMP, just to be sure as you may have one or more defective IC that cripple your kit.

    Higher capacity/frequency kits are more affected by this than others.

     

    Haha ok thats not possible ??? Why the hell then memtest say my 4. ram is wrecked and with every 16gb kit it works? Why should the ic be crippled?? Because i just used XMP and everything other normal? Thats ridiculous especially in regards with the latest voltages mess in the 1.2 and 1.3 bios and a pulled of 1.3 bios tells me everything. Also the ram worked like a charm for many months with my settings without any issue until an bios update. I recheck it but in 99.9% its not the case here. With every other ram stick populated in the slot or in all slots its works just fine like before.

     

    I am engineer at IBM so i dont edit my post cause its truly possible!!!

  7. What do you mean 'double flash'? Also does it fix the double post issue? Where do you dl it from?

     

    Thanks

     

    I mean with "double flash" that i flashed it one time ( that will update the updater aswell) and then after that i did flash it again and then shutdown and CMOS reset ( after disconnecting power).

     

    It seems like it kinda fixed the double post from cold boot issue but not the intended "if u change pcie settings ME firmware needs to save and reboot" behaviour which seems a feature rather than a bug. Which to me is logical and i only have this if i am change critical values in the bios.

     

    I did download it here in the frontpage.

  8. Ok flashed bios 1.51 yesterday and for me it seems to bring back some "Godlikeness". I double flashed bios and did CMOS reset. After that i put all my 4 ram sticks back, started and configured the bios. So from first time on a clean boot with m.2 and and XMP enabled also with all 4 sticks. No more "OC failed press F1" message or continous 04,60,55 debug LED boot loop. From that point good job!

     

    For me only one problem persist now which is that my SteelSeries Sensei mouse will not get recognized after booting up the computer after a longer period in standby.

  9. OK didnt ever believe this is possible but it seems one of the bios updates after 1.1 was killing my ram. Fact is i had massive boot problems and took out the fourth ram stick. And now everything is back normal and working like at the first day.

     

    Tested many combinations but its the one ram stick for sure. Crazy now i need to RMA and so on and just on 12GB RAM. Maybe i just buy a new kit. Somebody have experiance with G-Skill RMA quality?

     

    Whats up with bios 1.50 beta ?

  10. Btw some guy on the MSI forum is claiming there is an issue with Godlike 1.4 bios flashing killing ram. Crazy but true!

     

     

    Sent from my iPhone using Tapatalk

     

    Wow thats seems crazy. I hope this is not true. But my problems with the board are all over the place. Can you give me a link to the thread in the msi forum please? Thanks

     

    Btw. "good" (not really) to see i am not aloone with the problem. I think i will flash the second bios chip back to version 1.1 and try it again. Some weird stuff is going on with the "Godlike" bios.

  11. For me it seems that XMP is totally broken with latest bios on my Godlike. Also the dram voltage sometimes work and sometimes not. If so my settings work fine. If not i get "overclocking failed pres f1" mostly when booting up after a longer period in standby. I then need to switch voltage in bios for + or - 0.15v for dram and save and reboot and hopefully it boots with 1.35v and above. Mostly it will do not. With XMP enabled it stays strictly at 1.20v and so is when its set it self back. Bios 1.0 and 1.1 were working well.

     

    Moreover sometimes the board when booted after some time in standby dont recognizes my Steelseries Sensei mouse. I need to plug it out and back in again to make it work. In my opinion there is something weird going on with the two latest bios versions.

     

    Also remember bios version 1.3 was taken back by MSI and they released version 1.4 . But bios still seems to be broken. With bios 1.2 the problems started. But 1.4 seems even more worse.

×
×
  • Create New...