Pyr0Beast
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by Pyr0Beast
-
-
LN2, awesome.
Mine hanged up at ~170MHz or s for no apparent reason. Could use a bit more volts tho
-
Innovative setup and very nice results
-
It was a bit cold that day
-
You are forgiven.
Not because of the time passed, nor the forgiving part of my mortal soul,
but simply for the acquired knowledge through which you realized mistakes you made.
-
Would it be also possible to separate E and EB versions of Slot 1 Pentium 3 800MHz
-
So far, 4 submissions have been flagged for this problem.
First problem: Pentium 3 800MHz is not properly detected by CPU-Z.
On Slot 1, 2 editions of this 800MHz CPU exist, one with 8x multiplier and 100MHz FSB (E) and another (faster due to faster bus) version, however with 6x multiplier and 133MHz FSB (EB).
Problem arises since there was another Pentium 3 CPU with 6x multiplier and with 100MHz bus manufactured.
Abit BH6 on POST reports CPU as Pentium 3 600MHz(E) when FSB is set to 100MHz and Pentium 3 800MHz (EB) when FSB is set to 133MHz
Unfortunately, CPU-Z has problems differentiating between the two.
This is the P3-800 CPU:
http://www.shrani.si/f/3g/bn/1n5iWnol/dsc00026.jpg
Which is reported as this:
http://valid.canardpc.com/show_oc.php?id=602696
Similar is with Pentium 2 400 which is reported as celeron. Problem is since L2 shut-off due to high latencies which I was not aware at that time.
http://www.shrani.si/f/43/WU/4FIBWCOU/dsc00028.jpg
You can see the 44 ns ram, which is rated at 227MHz x 2 working frequency.
Reported as 266MHz celeron. L2 chache is detected but CPU-z is unable to measure its amount.
Veld - Pentium 3 800Mhz (slot 1, 133 FSB) @ 954MHz - 1h 43min 20sec 368ms wPrime 1024m
in Result Discussions
Posted
Sweet result