OClockDoc
-
Posts
42 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Events
Blogs
Posts posted by OClockDoc
-
-
everything sold, can be moved, thanks
-
5625 1.2 VCore Air cooled ( Deepcool Gammaxx GTE V2 RGB) [url=https://postimg.cc/w7GnhP65][img]https://i.postimg.cc/w7GnhP65/2023-05-15-115001.png[/img][/url]
-
All items arranged for now, will update if any change.
everything sold, can be moved, thanks
-
Golden Ryzen 5 7600X
No physic intervention. Works perfect. Local warranty + AMD.
Price: €380
14900KF, SP=94, IMC=78, VID=1.496V
No physic intervention. Works perfect. Warranty in Germany.
Only used for 3 days, 2 on water chiller and 1 on LN2.
Price: €550
ASUS ROG Crosshair X670E Gene
No physic intervention. Works perfect. Warranty in Germany.
Only used for test 7600X. Insulation will be cleaned.
Price: €350
Location: Sofia/Bulgaria/EU
PayPal or bank transfer. Buyer pays shipping.
everything sold, can be moved, thanks
-
1
-
-
Full pot, but AGESA 1.0.0.6. With 1.0.0.7c has CB.
-
First steps
And one more step:
-
2
-
1
-
-
Thanks for quick response. Bothe CPU exactly the same. I may will try some other.
-
5 hours ago, Seby9123 said:
0022 + ucode 09 needed for bclk oc (that bios was ucode 15)
Also here is 1401 bios I used for bclk oc https://cdn.discordapp.com/attachments/1113803878014652469/1153675416201068574/1401bclk.cap
If either doesn't work, let me know
Do You need to bin CPU`s for CB? I tried two 12300/12100 and both didn`t work below -50C. They didn`t freeze at idle but in benchmark.
-
Didn`t get exactly fullpot ~-155 C. 1.3 VSoc. Next time will try with 1:2 divider and higher VSoc.
-
Memory controller is weak. It can do 8000 on chiller with latest Bios, but has cold bug. Also no performance gain with 1:2 divider. Very hard to bench with this board, every 1 hour need to heat up, flash Bios and remount. Will try next days in other benchmarks.
-
It almost past 7050, but I was amazed and forgot to put some LN2. The board is a bit hard to handle with extreme cooling.
-
For sale Zotac GeForce RTX 4090 Amp Ext with Alphacool water block.
One fan with broken blade from first time when I use it. Otherwise in perfect condition, used only for benches on air/ chilled water. It has warranty in Germany/EU, but suposed fan must be replaced (compatible with Zotac 3090 Ti 110 mm fan).
Capable 0f ~3100-3180 Core Clock (air/water) and 1313 Mem Clock:
It is in Bulgaria/EU.
Price 1650 Euro with water block + shipping (PayPal or Bank Transfer)Best regards. Sold.
-
On 3/28/2023 at 4:52 PM, Sparky's__Adventure said:
Efficiency looks very good, have you tested BenchMate 10.5 vs 10.11 and newer?
No, I didn`t expect good result. My C8I died and this was cheapest temporary replacement for 24/7 use. Know I sold both CPU/MoBo.
-
1
-
-
Raptor Lake so far are unlocked so BCLK overclock works fine, on any decent board:
-
Hi, is it possible to increase maximum VCore on MSI PRO Z690-P DDR4? I need just 100 mV more for max out CPU on LN2.
-
Hi,
I am looking for MSI Tuning Controller, from someone with dead board, or someone doesn`t using it.
I need to try for LN2 session with PRO Z690-P DDR4 - MSI
Preferred EU because shipping cost.
PayPal or bank transfer.
Best regards.
-
Playing with one of the cheapest X570 board: Asrock X570M Pro4 (no mem VTT and CPU PLL for higher frequencies)
-
1
-
1
-
-
Hi, have 5950X for sale. With custom water cooling and liquid metal TIM can do 4725/4525 with 1200 mV. It is in Bulgaria (EU).
Price 850 Euro + shipping.
Best regards.
-
On 2/5/2021 at 10:26 PM, 5erveD said:
Ran 3204 for a few days now.
Anyone experienced trouble with the ln2 jumper resulting in a instant 92 postcode ?
It is too much VDDG_CCD, according to my experience. My CPU does not work above 1.13V. Does not matter with LN2 or normal mode. If i set it manually to 1.2V in Win it always will be equal to VSoc. Otherwise board works as expected on cold:
-
3
-
-
On 12/22/2020 at 10:52 PM, OClockDoc said:
Shure, I know the mem is unstable, but same settings works fine for 4000 and even 4066. That is why supposed it is BIOS issue.
tCWL 9 is no go, tWRRD 1 is fine, but don`t think it`s faster, tWTR L/S=3/8 lowest possible for me. I don`t think ProcODT has direct affect on time, may be stability issue affecting time.С2x8GB DDR4@3800MHz 11-11-8-9-21-29-1T
Some improvement with tFAW=6. Strange, because it shouldn't be possible.
-
3
-
1
-
-
On 1/19/2021 at 8:31 PM, Sparky's__Adventure said:
@OClockDocCan you do some 4.5g runs with your 4133c12 settings? I'd like to get a feel for how far behind I am, but my CPU can't do 5g single core on ambient.
-
1
-
1
-
-
5min 41sec 775ms That is also mine.
-
1
-
-
Thanks. Board work well with latest BIOS. Unfortunately mems are cheapest/lowest bined b-die kit on the market here.
-
On 12/21/2020 at 9:19 PM, chew* said:
My guess would be aggressive error correction. 2000 is not really any more stable than 3933 or 3966 all produce whea errors when not cutting OS memory down via maxmem. 3800 and lower is perfectly fine if there is no post hole which apparently even on DARK my 5900 has at 3800 with 07 post code. 3800+ boots fine but wheas.
Shure, I know the mem is unstable, but same settings works fine for 4000 and even 4066. That is why supposed it is BIOS issue.
On 12/21/2020 at 10:23 PM, Sparky's__Adventure said:@OClockDoccan you do tCWL 9, tWRRD 1, lower tWTR L/S?
Also does higher ProcODT have any affect on time?
tCWL 9 is no go, tWRRD 1 is fine, but don`t think it`s faster, tWTR L/S=3/8 lowest possible for me. I don`t think ProcODT has direct affect on time, may be stability issue affecting time.
2x8GB DDR4@3800MHz 11-11-8-9-21-29-1T
-
1
-
lkozarov - Core i3 12100F @ 6206MHz - 1min 50sec 798ms GPUPI for CPU - 1B
in Result Discussions
Posted