OClockDoc

-50 C. I couldn't find CPU benchable below that. Usually -20/30 C.

everything sold, can be moved, thanks

5625 1.2 VCore Air cooled ( Deepcool Gammaxx GTE V2 RGB) [url=https://postimg.cc/w7GnhP65][img]https://i.postimg.cc/w7GnhP65/2023-05-15-115001.png[/img][/url]

All items arranged for now, will update if any change. everything sold, can be moved, thanks

Golden Ryzen 5 7600X Cinebench - R20 GPUPI for CPU - 1B score 7-Zip score No physic intervention. Works perfect. Local warranty + AMD. Price: €380 14900KF, SP=94, IMC=78, VID=1.496V No physic intervention. Works perfect. Warranty in Germany. Only used for 3 days, 2 on water chiller and 1 on LN2. Price: €550 ASUS ROG Crosshair X670E Gene No physic intervention. Works perfect. Warranty in Germany. Only used for test 7600X. Insulation will be cleaned. Price: €350 Location: Sofia/Bulgaria/EU PayPal or bank transfer. Buyer pays shipping. everything sold, can be moved, thanks

Full pot, but AGESA 1.0.0.6. With 1.0.0.7c has CB.

First steps And one more step:

Thanks for quick response. Bothe CPU exactly the same. I may will try some other.

Do You need to bin CPU`s for CB? I tried two 12300/12100 and both didn`t work below -50C. They didn`t freeze at idle but in benchmark.

Didn`t get exactly fullpot ~-155 C. 1.3 VSoc. Next time will try with 1:2 divider and higher VSoc.

Memory controller is weak. It can do 8000 on chiller with latest Bios, but has cold bug. Also no performance gain with 1:2 divider. Very hard to bench with this board, every 1 hour need to heat up, flash Bios and remount. Will try next days in other benchmarks.

It almost past 7050, but I was amazed and forgot to put some LN2. The board is a bit hard to handle with extreme cooling.

For sale Zotac GeForce RTX 4090 Amp Ext with Alphacool water block. One fan with broken blade from first time when I use it. Otherwise in perfect condition, used only for benches on air/ chilled water. It has warranty in Germany/EU, but suposed fan must be replaced (compatible with Zotac 3090 Ti 110 mm fan). Capable 0f ~3100-3180 Core Clock (air/water) and 1313 Mem Clock: It is in Bulgaria/EU. Price 1650 Euro with water block + shipping (PayPal or Bank Transfer) Best regards. Sold.

No, I didn`t expect good result. My C8I died and this was cheapest temporary replacement for 24/7 use. Know I sold both CPU/MoBo.

Raptor Lake so far are unlocked so BCLK overclock works fine, on any decent board:

Hi, is it possible to increase maximum VCore on MSI PRO Z690-P DDR4? I need just 100 mV more for max out CPU on LN2.

Hi, I am looking for MSI Tuning Controller, from someone with dead board, or someone doesn`t using it. I need to try for LN2 session with PRO Z690-P DDR4 - MSI Preferred EU because shipping cost. PayPal or bank transfer. Best regards.

Playing with one of the cheapest X570 board: Asrock X570M Pro4 (no mem VTT and CPU PLL for higher frequencies)

Hi, have 5950X for sale. With custom water cooling and liquid metal TIM can do 4725/4525 with 1200 mV. It is in Bulgaria (EU). Price 850 Euro + shipping. Best regards.

It is too much VDDG_CCD, according to my experience. My CPU does not work above 1.13V. Does not matter with LN2 or normal mode. If i set it manually to 1.2V in Win it always will be equal to VSoc. Otherwise board works as expected on cold:

Some improvement with tFAW=6. Strange, because it shouldn't be possible.

5min 41sec 775ms That is also mine.

Thanks. Board work well with latest BIOS. Unfortunately mems are cheapest/lowest bined b-die kit on the market here.