Donbe

Thanks, Pt1t-san. I tested result. http://hwbot.org/community/submission/2103336_donbe_wprime_1024m_core_i7_2600k_2min_28sec_437ms http://hwbot.org/community/submission/2103340_donbe_3dmark06_geforce_gtx_480_35893_marks 5210MHz @1.45V

oh, I did not notice. I think that this is a bug of GPU-Z. It is recognized SLI in ORB. http://3dmark.com/3dm06/14182155 Because I cannot present SS without the bug, this post is deleted. And, I challenge newly.

Hi, olesius-san. The batch of the CPU is 3005F742. Thanks.

Thanks

It's 1.90V.

Yes, This chip is 3005F742.

Thanks,Olesius-san. The temperature is a temperature of the buffer of Cup. CB is about -160C.

hi, Olesius-san. It becomes 1.50V even if it sets it to 1.55V with BIOS.

When I next try, try using CCC10.3.

Nice Bench!

I try again to 5770hawk OC at Dice in last weekend. Core i7 960 msi Eclipse Plus G.Skill Perfectstom F3-16000CL8T-6GBPS MaxxNeo by TAM Tek-9 Ver6.66 by Vince 3D06 : core 1270MHz/mem1300MHz VGPU 1.42V I'm sorry,poor English. Thanks

Great clocks!! What is the Afterburner version?

hi,all members. I have targeted the 3D06 of AMD in the record, I did not get seven points. However, 38k+ I'm satisfied I've achieved. Thanks.

The next challenge is likely still some time away. Next time, target is 1.4GHz+. Thanks

It's my easy mistake. When Vmem was remodeled, it seems to have put up wrong VR. When a new card is obtained, I challenges again.

hi,Theorw Vmem mod point seems to be safe in #6pin of uP6101. 100KΩ VR to ground. However, if a new card is not obtained, it is not possible to verify it because I have destroyed it. hahaha....

This time, to concentrate to raise GPU Clock, Vmem doesn't do mod.

I'm sorry,It made a mistake in registration. Please delete it. http://hwbot.org/community/submission/957543_donbe_pcmark_vantage_core_i7_extreme_965_14634_marks

I am not good at soldering. Therefore, it searched for the point that was able to be soldered a little more easily. I was good at mod by this. Please guide it when wrong. thanks

The voltage indicated 1.75V in the tester. It was possible to run the whole distance in the same process as the time of a complete test when only GT2 was selected. There is no cold bug. However, it did not continue if it did not turn up the heat up to about -130℃ when GT1 was read. It was necessary to pour LN2 from the vicinity where roading GT1 had been completed.

hi,massman. LN2 Overclocking of VGA challenged for the first time yesterday. 3DVantage-P was 1350MHz and OK. However, if it was only GT2, it was OK by 1400 MHz in the same voltage. I should practice so that Overclocking may do better. Thanks.

hi,all. Because I obtained the chance to test msi R5770Hawk, it reports. I tried OC by air cooling. [system] CPU : Intel Core i7 Extreme Edition 975 MB : msi Eclipse Plus RAM : G.SKILL F3-16000CL8T-6GBPS VGA : msi R5770 Hawk PSU : Silverstone ZU-1200 OS : Windows Vista Ultimate 32bit [setting] CPU 4GHz(BCLK200*20) Memory DDR3-1600 CL6-7-6-18 Uncore 3200MHz GPU core 1120MHz at VGPU 1.45V(mod) Memory 1400MHz 3D06 : 20775 3DVan : P13607 I was able to enjoy OC. I am not good at English. I'm sorry. Thanks.