MTB Scotland
-
Posts
18 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by MTB Scotland
-
-
not sure if you have enough fans there lol
-
23 hours ago, unityofsaints said:
Which GPU is it? Can't tell from the logs alone. A screenshot with GPU-Z may be helpful as well.
Reinstalling the drivers worked but I get an error after batch 4 Error: Invalid partial result by a margin of 0.000000003185910. Tried combinations of batch and reduction size but makes no difference
OG START at 2022-01-11 22:17:56 ----------------------
HWiNFO library for extended hardware detection successfully loaded.
Timer initialization:
QPC is available
OS detected: Windows 8 or higher
CPUID: AuthenticAMD (Family: 15, Model: 1, Stepping: 1)
CPU detected: AMD
Mainboard model detected: X470 GAMING M7 AC (MS-7B77)
RTC is not safe to use on this system!
Timer: HPET (14.32 MHz)CUDA is not supported on this system (Error: CUDA driver version is insufficient for CUDA runtime version)
CUDA devices initialised:
=> no devices found.
OpenCL GPU devices initialised:
=> AMD Accelerated Parallel Processing 2.1
- AMD Radeon RX 5600 XT (18 CUs, 1660 MHz, OpenCL 2.0) (PCIe: 0000:29:00.0)
OpenCL CPU devices initialised:
=> no devices found.
OpenCL Accelerator devices initialised:
=> no devices found.
Timer initialization:
QPC is available
OS detected: Windows 8 or higher
CPUID: AuthenticAMD (Family: 15, Model: 1, Stepping: 1)
CPU detected: AMD
Mainboard model detected: X470 GAMING M7 AC (MS-7B77)
RTC is not safe to use on this system!
Timer: HPET (14.32 MHz)Decrypting kernel source: IDR_OPENCL_PI
Decrypting kernel source: IDR_OPENCL_PI
Decrypting kernel source: IDR_OPENCL_REDUCTION
Decrypting kernel source: IDR_OPENCL_REDUCTION
Starting run to calculate 1000000000 digits with 1000 batches
Batch Size: 1M
Maximum Reduction Size: 16
Spawning 1 threads for scheduling workloads to devices. -
Its an RX 5600 XT
open CL is not ticked anymore on my GPU. I'll reinstall driver
-
Stumped with this. CPU works fine.
Debug log
LOG START at 2022-01-10 21:26:20 ----------------------
HWiNFO library for extended hardware detection successfully loaded.
Could not open file handle for loading options file!
Could not load options from file!
Timer initialization:
QPC is available
OS detected: Windows 8 or higher
CPUID: AuthenticAMD (Family: 15, Model: 1, Stepping: 1)
CPU detected: AMD
Mainboard model detected: X470 GAMING M7 AC (MS-7B77)
RTC is not safe to use on this system!
Timer: HPET (14.32 MHz)CUDA is not supported on this system (Error: CUDA driver version is insufficient for CUDA runtime version)
CUDA devices initialised:
=> no devices found.
OpenCL GPU devices initialised:
=> no devices found.
OpenCL CPU devices initialised:
=> AMD Accelerated Parallel Processing 1.2
- AMD Ryzen 7 1700 #1 (16 CUs, 2994 MHz, OpenCL 1.2) (PCIe: undefined)
=> AMD Accelerated Parallel Processing 2.0
- AMD Ryzen 7 1700 #2 (16 CUs, 2994 MHz, OpenCL 1.2) (PCIe: undefined)
OpenCL Accelerator devices initialised:
=> no devices found. -
That is a lot of volts you put through the chip. What are you cooling it with?
-
downloaded BenchMate 0.10.7.2 and avast is telling me it is infected with IDP.generic
-
how did you unlock the bios?
-
Going to have to do a lot more than report valid results to get back 3rd place.
-
you've put the wrong score in - should be 75.32 according to your results tabs
-
what sort of temps are you getting on the ram and vrm without the fans from the cooler?
-
-
no, just letting people know.
-
is the card volt modded?
-
various types of HD 3470. can have DDR2 or DDR3
-
how did you get the block on the GPU given the mounting hole width?
-
you didn't enable 12 threads in the advanced settings I see. I did that on the 32m calculation first.
-
Traktor - Radeon RX 5600 XT @ 2081/1988MHz - 4674 marks 3DMark - Time Spy Extreme
in Result Discussions
Posted