-
Posts
659 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by stasio
-
-
ASUS P8P67
http://www.mediafire.com/file/b759m6aj793jbs8/P8P67-ASUS-1608.zip
P8P67 Deluxe
http://www.mediafire.com/file/ib9xeps3j5ieq94/P8P67-DELUXE-ASUS-1606.zip
P8P67 Evo
http://www.mediafire.com/file/ucm9i3k1m53iv1f/P8P67-EVO-ASUS-1606.zip
P8P67 Pro
http://www.mediafire.com/file/qsuatggdn69k89z/P8P67-PRO-ASUS-1606.zip
P67 SABERTOOTH
http://www.mediafire.com/file/zl2ecay0afy7vj1/SABERTOOTH-P67-ASUS-1606.zip
P8H67-M-EVO
http://www.mediafire.com/file/3sq6pneridym2ha/P8H67-M-EVO-ASUS-1607.zip
1. Enhance support for Game Port on old audio cards.
2. Enhance SATA compatibility
3. Enhance mouse/keyboard support under UEFI
4. Enhance USB2.0 / 3.0 legacy support
5. Enhance PCIE compatibility
6. Enable support of CAS = 4 DDRIII-1333 modules
-
-
-
Yes , i tried with the DEL key but no reaction . Completely stuck .
ALso tried 2nd time to flash with no change .
I'll leave it for an hour this time .
Thanks .
Are you have your HD in AHCI/RAID or IDE in the BIOS?
I think Gigabyte added new RAID/AHCI ROM in the BIOS F6.
Maybe this will be the reason.
EDIT:
Lsdmeasap help me to solve the problem (and test).
eSATA option is the problem, not Intel ROM or that new ROM setting in the BIOS, you can set that anyway you want.
But main issue is eSATA setting so anyone that flashed already from yesterdays BIOS files can just wait at the splash screen until they can enter the BIOS, or wait until windows loads and then disable eSATA via BIOS or Touch BIOS.
So these have new RAID Rom (Which didn't matter), and a instruction on how to flash and make the hang stop once you flashed over to Z68X-UD4.
-
Hi,
yes I have also same problem with UD7,but i leave at the LOGO Screen (third/fourth time) and after some time (maybe 5 min) went to the Windows.I spend arround 1 hour to finally boot at normal way.
Did you try pressing DEL,to went to BIOS?
If BIOS ID it's not good,@BIOS will give "BIOS checksum error" or "Invalid BIOS image" on the beggining.
Btw,
if you don't want to try more here is new BIOS:
-
Would it be possible to patch a P67A-UD4-B3 bios so we can flash with the Z68 equivalent ? Maybe it's the only way to play with hyper and 2133Mhz divider.
Thanks .
I can do,
but will be untested,as I don't own UD4 board.
Let me know,if you want.
Edit:
Modded (untested) BIOS Z68X-UD4-B3 - F6 with Hex Editor XVI32 (working only for P67A-UD4-B3 BIOS):
http://www.mediafire.com/?k0uitnfncmfevp6
Before flashing,set in the BIOS "Optimized Defaults".
Flash with latest @BIOS 2.11.
After restart,BIOS maybe will "hang" on BIOS Screen for about 2-3 min.
Disable anything what you didn't use, with latest Touch BIOS
in the Windows.
Restart and after should be OK.Clear CMOS will also speed boot sequence.
Modded BIOS to flash back to P67A-UD4-B3 BIOS F4:
-
Modded BIOS (tested) for P67A-UD7-B3 to flash with Z68X-UD7-B3 BIOS (Touch BIOS works) is here:
http://www.xtremesystems.org/forums/showthread.php?t=263598&page=94
-
GA-Z68X-UD7-B3 - F6
GA-Z68X-UD5-B3 - F6
GA-Z68X-UD4-B3 - F6
GA-Z68X-UD3P-B3 - F4
GA-Z68X-UD3R-B3 - F2
GA-Z68X-UD3-B3 - F2
on Gigabyte web site.
-Fix S3 wake up issue
-09.May 11
-
-fix bug with DVID (LLC disabled)
-02.May 11
-
-
For a best OC, what's BIOS it's recomendable for GA-P67-UD7 B3? I tried F4a and I didn't found "load calibration" and I have 0.037 VDROOP.
regards
pd: Sorry my English
Try F3h.
-
-
-
-
Mayak,
can you mod BIOS for UD3-B3 - F3 to be flashed to B2 mobo.
UD3..........7A89UG09
UD3-B3.....7A89VG0B
Thanks in advance!
-
-
F3 works fine on my UD5 (B2) board, i don't see bugs. ET6 works fine too. LLC level 6 good for me. It's THE BEST Bios
Yes,I agree with you.
BIOS is different,but NOT defective and garbage
,as they attack me on "hardwareluxx.de" forum.
They in Germany had his own "Guru" and they beleive only to him.
They had been surprise and sceptic,how I post BIOS before GB server and act like half closed eyes horses,waiting always for "Jockey" command.
-
-
-Solve press reset button cause system abnormal
-Implemented "Multi-Steps Load-Line" (UD7/UD5-10 levels).
Flash with "Load Optimized Defaults" and clear CMOS.
DO NOT use old BIOS profile!!
-
Yes,
all with PLL override.
Edit:
Modified BIOS to flash back from B3 to B2:
http://www.fileden.com/files/2009/12/20/2696817/p67aud7.f8f1.zip
http://www.fileden.com/files/2009/12/20/2696817/P67AUD5.f7e1.zip
http://www.fileden.com/files/2009/12/20/2696817/p67aud4.f8i1.zip
Thanks to Mayak.
Added:
-
-
pll overvoltage dosent work. max 48x with pll overvoltage enable.
Massman,
please take out "no pll override" from first page for:
- P67A-UD4 bios (F3d1): http://91.121.148.119/downloads/BIOS/p67aud43.f3d1 (no pll override)(B3-BIOS mod by Mayak, click for info)
All new UDx-B3 BIOS's are with pll override.
-
Mayak...THANKS A LOT!!!!
Anything you need just post or PM me.
-
Ok. Thanks, I will try to solve this problem.
I'm very pleased to help you
Thanks,only CPU-Z,
but ET6 and AIDA show P67A-UD7-B3!
Can you ask mayak which hex editor he use?
Thanks a lot.
P67/Z68 BIOS collection
in Sandy Bridge (P67/Z68) OC
Posted
ASUS SABERTOOTH
ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155/SABERTOOTH_P67/SABERTOOTH-P67-ASUS-1702.zip
ASUS DELUXE
ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155/P8P67_DELUXE/P8P67-DELUXE-ASUS-1702.zip