mosie
-
Posts
15 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by mosie
-
-
-
Perssonaly I m so sad ............
But wait test with no ES or ORB information.
-
''Maybe Asus BIOS cant do it, but we have another options ''
hhmm, You say: Its possible STEEP BLK worcking with asus bios modification/update ? and with actual ES chip ? or just with OEM CPU verssion ?
arf, NDA
-
-
"will not work when you have 2 cpu's and only on side of 1 cpu mem modules."
Its worck, I have test this.
1 module or 2 or 3 or 6 put in one CPU with no module put in second CPU: WORK. NUMA mod men ....
I would need the help of the users who have any CPU CPU 6.40 GT/s to have 2:10 ratio, and 12X2GB.
If you can test run at more 195 BLK at 2:10 with any CPU ratio.
The purpose is to see if all 24GB is detected when MHz ram is more than 950MHz.
It might be possible that nobody is able to succeed with 24GB at this MHz.
-
not bad bandwidth.
Certenely worck, use just 6 slot in same CPU but with two CPU active.
-
I ahve me too a strange RAM bug.
Once we set BCLK higher than 193 MHz, 24GB of RAM are ramdomly detected.
whatever the setup (CPU voltage, timings or other) no way to solve it.
The higher the Bclk is, the lower the detected RAM quantity is. @ 23*196=> same issue.
It's not due to the high frequency of the CPU.
And I whant stay at 196*25
I encounter this problem with 12X2GB 2000 C9 kingston HyperX and 12X 2000 C6 gskill.
Disabling NUMA not corect IT
Whene I have 196 blk tedetection ram its min dectect 4GB at 16GB max NEVER 20 or 24 GB.
and at 203 BLK its lower GB detection.
I have tested in SR 2 friend setup with 198 BLK with 24 GB GSKILL and no problem. all RAM is detected.
I hope this problem its not due to BAD IMC CPU due to ES verssion.
Have you ever encountered same problem ?
-
I have already see a bsod due to the USB 3 but its hard for generate this bug.
I remember a problem which would be interested to correct:
The OC BLK by 2 steps
If you try directly more 155 BLK, after shut down the motherboard make FF.
-
possible its due to low gap memory can t alocate RAM per GPU when NUMA disable.
-
Possible to disable NUMA with dual GPU vga in the system
Its phisicaly possible ?
-
Only C1E? LOL
There's a bunch of locked stuff left - QPI slow mode, Memory controller mode (Xeon/NUMA stuff), peripheral stuff - PCI-E ports Priority, Enable/Disable and APIC. Some other stuff like "Hit del message display" and "Wait for "F1" if Error".
.
+1
and:
real GHz cpu in post screen, in defaut change ordering check PCIE ....
-
HIHI
Who modified this bios ?
For flashing, change name bios 1W555A53.rom to 1W555A50.rom
my test:
http://www.kingpincooling.com/forum/showthread.php?t=1241&page=3
THX chiller
-
WWWOOWWW 1050 with 1.175 V ?????????????????
VERY NEED your bios's PPPPLLLLEEEAAAAASSSEEEEEEE
For understand what please read this:
http://www.techpowerup.com/forums/showthread.php?p=2225897#post2225897
http://forum.hardware.fr/hfr/Hardware/2D-3D/penser-6990-amd-sujet_885272_1.htm
Its strange, afterburner , not work for me I can monitor just 1 gpu /4
DO you can modifie voltage with afterburner ????
Please answer me, its IMPORTANT and urgent.
Thanks
-
WWWOOWWW 1050 with 1.175 V ?????????????????
VERY NEED your bios's PPPPLLLLEEEAAAAASSSEEEEEEE
For understand what please read this:
http://www.techpowerup.com/forums/showthread.php?p=2225897#post2225897
http://forum.hardware.fr/hfr/Hardware/2D-3D/penser-6990-amd-sujet_885272_1.htm
Its strange, afterburner , not work for me I can monitor just 1 gpu /4
DO you can modifie voltage with afterburner ????
Please answer me, its IMPORTANT and urgent.
Thanks
[FS] Autocascade
in Sold
Posted · Edited by mosie
wow very nice stuf/realisation. evap made by ? an old piotre ?
You are in which country ?
Can have more spec about the CP ?
the rebuild is already charged ?
Possible for a litle modification ? : remove the air condenseur for a plate exchange for the purpose to be WC.
can be run for H24 ?