trevormacro
-
Posts
77 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by trevormacro
-
-
First TEST with same system of my watercooling cards.
3DMark01se and Quake3 Freeze @166MHz in the first 5s.
The Watertemp 50°C is to high. (measured with IR lasergun)
The Tecs can be cool -22°C without heat. Better is 30°C watetertemp. But I need more radiatorsurfaces. 360mm radiotor is not enough big to cool well the water.
I have a thermalpower about 480W (400W for the tec cooler and 80 max in charge for the V5k6).
The 360mm Radiator is recommend about 200-300W for good watertemperatures. Better is, I get one more radiotor or much better 2 more. Or with a chiller I would have any better watertemperatures. May be below 20°C.
I let you know.
I have baught this waterchiller.
Aquatuning recommend this one.
I hope I will receive it in good condition with DHL.
Anyone have experiences with waterchiller?
History:
On the frontside:
4 tec of 36W for gpus and 3 tec of 18W for sdrams.
144 + 54 = 198Watts
http://img15.hostingpics.net/pics/20780084y3.jpg
http://img15.hostingpics.net/pics/49351671y4.jpg
On the rearside:
3 tec of 18W.
=54Watts
http://img15.hostingpics.net/pics/20350942y6.jpg
http://img15.hostingpics.net/pics/17825149y7.jpg
In all = 252Watts TEC on the card + 100Watts max for the V5k6 = 352Watts
The waterchiller is for 790Watts with max low temperature of 4° C.
Is it good?
One VSA100 produce 14Watts in full charge. is the tec (36W) on gpu are good for it?
-
Hello,
The Control Panel:
Let's start...
Let's see if condensation occurs...
Next step for the next time...
-
Hello everybody,
Do you remember the V5k6 GOLD SE with aircooled system?
Who want to see the update?
-
Preparing the card with plastik 70:
Preparing waterblocks:
Preparing the tec's:
-
The green color is good now.
Soon the next step...
-
Hi,
Some tests for the green color.
nb. the painter will paint again because the quality is bad.
What do you think?
-
Hello,
Come back
The front copperbaseplate is done:
New structur. 1mm to 0.3mm for cooler tecs. 4 hours of investement for this struktur. In the backcooler, same structur.
An electronics engineer draws up the control panel:
All provisionally done.
Here is the beauty:
In progress now...
Regards,
Trevormacro
-
Hello,
Informations about Peltier elements:
QC-127-1.4-3.7MS
Peltierelement 36W for GPUs
40x40x4,7mm
30,12€/pieces
120,48€ (4 pieces)
QC-127-1.0-3.9M
Peltierelement 18W for Sdrams
30x30x3,6mm
26,92€/pieces
179,52€ (6 pieces)
8 Tecs are here:
The others tecs will arrived 2 weeks later.
Powersupply is ordered:
350W Coolingpower is very high. Maybe, we can freeze the card for best o/c results.
Powersupply received:
-
Hello,
Here is one of my 3dfx Voodoo5 5500 PCI.
-> Unsold original 6 ns sdrams and sold new 4 ns sdrams.
-> Unsold original VSA-100 Rev.220 and sold new VSA-100 Rev.320.
Pictures :
Before modding :
After modding :
Here we have the 3dfx Voodoo5 5500 PCI Silver Edition:
Video:
Finished soon...
Best Regards,
Trevormacro
-
The second one...
Video:
Best Regards,
Trevormacro
-
Hello,
I love 3dfx and I want the best cooling system for The Voodoo5 6000.
I think it will be the best project never realized on this card.
Video:
...Before end of this year...
Best Regards,
Trevormacro
-
Bonus time:
Video:
-
Here is the Mystical card:
Pictures:
-- The 3dfx Voodoo5 6000 Mystical Edition Booting --
Video:
-- It's time to test --
The card booting and benchmarking...
Video:
Now, I present you The Fastest Voodoo5 6000 in the world...
Video:
Terrible, no?
-
Hello,
I just received my Voodoo5 6000 Mystical Edition:
Pictures:
Pictures and Tests before end of this week!!!
Stay tunned
-
I added copper sheet for sdrams in back of rear heatsink:
Eighth video:
-
Two blocks are joined:
-
Rear heatsink:
Working in the right block...
Two rear blocks:
Copper sheet came in. I adjusted it for joining both heatsink.
I did 3 holes in the copper sheet and 3 holes more in the base from left heatsink.
-
Successful Leak Test:
-
Doom 3 playdemo:
- OpenGL32.dll MesaFx 6.2.0.2 with DooM 3
- Comparaison @166 MHz and @199 MHz...
- In console: playdemo activate_demo1.demo
Video:
-
After work, here is the copper heatsink without fans:
Need to put on the front of the V5 6000 card...
-
cool project , but we want to see some benchmarks
Thank you but this project is not finished you must wait...
-
I present you The Voodoo5 6000 Silver Edition with 4ns tsop sdrams...
The progression:
First video:
Second video:
Third video:
Fourth video:
Fifth video:
Sixth video:
Seventh video:
Your reactions?
-
Second Teaser:
Your reactions?
-
Third video:
3dfx Rampage #B001
in General hardware discussion
Posted
Hi,
After more than 10 years, the rampage (in working condition) is here:
It's a legendary card and never tested.
You can wait your whole life and never have one.
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1370739590/0
Have a pleasure to follow me (including post some goods ideas) and register on this board (all graphics cards fans).
If you want to make an article on my card, feel free...
Trevormacro.