boobteg4642
-
Posts
40 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by boobteg4642
-
-
Only 1 GPU, D@rkkey's entry should not be accepted.
-
I meant under video memory 1013 Mhz not 1594 Mhz, 1594 Mhz is my factory clock.
-
Validation picture might be messed up Im not sure.
-
Have had it to 4800mhz but not for daily use.
-
Hi. I'm trying to find the right Vcore to set an fx-6200 above 4400mhz. I'm overclocking only using the mulitiplier at the moment, memory overclcoking is messy. CPU-NB is at 2200, HT-link is 2600. The board doesnt like to go above 1866mhz on the memory, even though it says it supports 2133mhz. Plus I wouldn't know where to set voltages for higher CPU-NB settings and HT-link if I increase the FSB. Although is says Ht link is safe up to 3200mhz, I dont even know the stock voltage on the HTlink so I wouldnt know where to start. Plus I don't know if HTlink CPU-NB and memory should all be raised equally via the FSB or seperatly.. The memory timings autoadjust to the frequency of the memory. Right now their 9-9-9-24 at 1600mhz. I've just seen other overclockers be able to keep stable at above 4400 and wondering how. Cooling is not an issue, liquid everything. Under load i hit like 45 celcius. Thank you for the help.
-
CPUNB can be at auto, if is near the default clock (2000-2200MHz)
Hwats your VRM? Its hot or not? Whats your CPU current capability in BIOS?
CPU current cability like stable? or highest muliplier?
-
VRM temps I'm assuming are fine (is less then the cpu itself). CPU-NB is at 2200, HT-link is 2600. The board doesnt like to go above 1866mhz on the memory, even though it says it supports 2133mhz. Plus I wouldn't know where to set voltages for higher CPU-NB settings and HT-link if I increase the FSB. Although is says Ht link is safe up to 3200mhz, but I dont even know the stock voltage on that so I wouldnt know where to start. Plus I don't know if HTlink CPU-NB and memory should all be raised equally via the FSB. The memory timings autoadjust to the frequency of the memory. Right now their 9-9-9-24 at 1600mhz. I've just seen other overclockers be able to keep stable at above 4500 and wondering how. Cooling is not an issue.
-
What is causing the instability? If it's a temperature related issue, more voltage is not going to help.
(ps: moving this to the right subforum)
Its not tempurature related, I'm watercooled both cpu and gpu. Max temp i've reached was 51c via HWinfo, also HWmonitor.
Components;
msi 990xa-gd55 motherboard
EVGA GTX 580 gpu
Corsair Vengeance Pro Series DDr3 1600mhz 2 x 4gb ram 9-9-9-24 timings.
Cooler Master 750 watt power supply
Sandisk Extreme 128gb SSD
I can play games with it and use it at 4300mhz and about 1.4v but it fails prime95. I dont know what the factory CPU-NB voltage is so I left it alone. Only raised v-core. Thx appreciate the help.
-
So this competition is limited to Intel processors only? With XTU and all, and no 4 core AMD processor will match a 4 core intel. Sorry, but im a proud owner of a six core amd processor. Can't compete limited 4 core only.
-
also maybe my amd processor is a bottlekneck idk
-
i meant mine didnt do so good amongst the gtx 580's. i think its my memory stuck at 11-11-11-28 timings
-
How 462 out of 1000 with single GPU but 128th out of 151 with gtx 580?
-
Hello, I have fx6200. What Cpu voltage for 5000mhz? Mine becomes unstable at 4400mhz @ 1.468v. Only overclocking with multiplier.
-
Please, no SLI setups for true competition. Only 1 GPU. Thank you and happy oC'ing!
The official boobteg4642's 3DMark - Cloud Gate global challenge - Oct 20, 2014 until Oct 27, 2014 thread.
in Challenges
Posted
Pull out 1 GPU and do it fair.