iProSocial

Thank you for your response @wutske. Much appreciated. It seems from my testing that my board won't allow 1T a this high of a frequency (4133). I did have 1T running previous with with following frequency and timing: Frequency: 3600 MHZ Primary timings: 14-13-11-21 Perhaps I can revisit 1T and try going up from 3600 with looser timings. Thanks for that suggestion. And thanks for catching that reduced BCLK. I hadn't researched that frequency before, and now I see that drop from the 100 MHZ set in bios. And now I know what "spread spectrum" is and what it does. I tried increasing by .24 to make up for what was missing, but experienced instability. I did not however try disabling Spread Spectrum. I did see a slight increase in RAM and CPU frequency from that increase. I guess that's how people are able to get those non-standard RAM frequencies I see online. I did order a z790 Apex and some 8000 MHZ DDR5. I bet THAT board will allow me to play a little more with BCLK with better stability. I just don't know what else my z690 Edge can give me. Thanks again, and let me know if there's anything else you think I can try.

Hi all, Long time gamer, first time poster. I've been fiddling with my RAM timings for for days, and I don't know where to go from here. Thought I'd see if someone in the Rookies thread can help me out. My goal is to get my latency (AIDA64 Extreme ) below 50 ns, I dream of 45-46 ns. But is that just what it is? A dream? Current AIDA64 Latency ~ 51.8 ns Stable at 4133 with 15-15-15-30 RFC 260 Specs and OC (TestMem5 anta777 5 Cycles PASS) (secondaries and Tertiaries are in the screenshot). Kit: GSKILL Trident F4-4266C17D-32GTRSB RTL : I thought I had tightened the RTLs, but it looks like I only have them at 73/73/73 | 81/81/81 (Can't find iO-L timings in my BIOS to fiddle with them) Board: z690 Edge DDR4 VCore: 1.325 v DRAM Voltage: 1.5 v SA Voltage: 1.42 v VDDQ: 1.35 v What can I do here to make an impact on my Latency? Hope I've provided enough info, and hope someone can give a guiding hand.