kaliz
-
Posts
398 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Events
Blogs
Posts posted by kaliz
-
-
what went wrong!? i never typed in 7676 that is one thing i am 100% sure off.
-
-
my pleasure, it just boots 5757 with 5300 ring and 7000+ memory, able to raise bclk up to 5900MHz but havent been able to use high mem freq on superpi 32m , yet :D
-
-
nice thermal grease!
-
Really efficient and amazing score for this clockspeed
-
1
-
-
impressive! Very great ring and mem clock
-
very nice 8 sticks!
-
1
-
-
The HWinfo readout with just 50% core utilization is because of the polling period is set to default 1000ms. If you shorten the polling rate to 200ms your read out are 5 times more accurate ( the sensors will collect data every 200ms instead of every 1000ms it does now,
you can find the oprtion in Settings
-
yoooo this is pretty nice for Z690!
-
-
8000 works just fine too ofcourse
-
1
-
1
-
-
I dont want to be harsh but why are you asking these basic knowledge things on a dedicated benchmark and overclocking site? I think you need to start at the very basics and learn. Work your way up with knowledge, read on OCN forums etc. I suggest leave everything CPU wise stock and make a stable RAM profile first, go from there. Good luck
-
When you see LN2 mode in bios :D
-
it counts the iGPU for x2 when uploading from hwbot app
-
-
not too shabby! Now I have to try again :D
-
just grabbed my taichi lite B650E +7800X3D system and ran some bclk OC ycruncher. the zentimings is open for inspiration,
once you get the feeling for it its not that hard
gotta tell you, i overclock everything DDR4 and DDR5 and X3D overclocking is totally different than anything with a multiplier and voltage input., so be prepared for a learning curve
-
2
-
-
it is a great board for eclk OC on all my AM5 CPUs, its miles better at RAM OC vs a cheaper B650 board and eclk+RAM OC up to 8800 works. The trick is, to use PBO curve optimizer with bclk OC, and make sure you have set up your RAM properly. When using eclk: BOOT: It will first train the 100 bclk timings, after that it will retrain with eclk so its like a double boot. Good luck it a beast of a board.
-
Great little mobo for it
-
Thanks! I got this X99 mobo just last week, for my old 5820K and a 6900K, i love DDR4 OC on this board 10-10-10 2750 was the 'best' with extreme tight subs, max 3500 12-12-12 but still trying to get it higher more consistent. The 12-12-12 was a little bit faster in 7zip vs 10-10-10. will check out the guide!
btw GB3 memory was around 8400 trying to get it 9000+
-
nice CPU i dont think mine can do 5875
-
great to see this board in action
-
1
-
-
bennylodewijk - DDR5 SDRAM @ 5173.2MHz - 5815 MHz Memory Frequency
in Result Discussions
Posted