inspectagame
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by inspectagame
-
-
Would I be better off to use an .xtu profile for same board and chip and see how that runs, I just read about the XTU utility and the profiles of peoples hardware etc.
Do these profiles change all the settings in the bios or in windows?
-
Hi folks,
First post here, hope I a in the right place for the thread, ok so I have bought an ASRock X79 Extreme 6 and Intel i7-4930k combo.
I am trying to find uefi settings for this combo but fresh outta luck, I am using BIOS version 3, I run a Corsair H100i liquid cooler on the CPU and that did my last i72600k @ 4.9ghz very nicely.
Ok so I am struggling to use the auto or EZ OC at 4.6, 4.8 forget it but 4.6 is struggling, the fixed voltages are like 1.45 and that to me is too high for sure, ok so guys, can anyone or does anyone know of the uefi settings I should be manually dialing into this combo?
I am aiming for 4.8 eventually but just not having success, with this combo, the i7-2600k and Z68 Extreme 4Gen3 board I had prior was a cinch, this is not looking so good, I ummmmed and arrrred about this upgrade and I am not reaping 4.6 without high voltages and 4.8 forget it.
Could anyone please help me and share your expertise with the main uefi settings I should be dialing in?
CPU-Z validation page is here: http://valid.x86.fr/q1919f
Many thanks in advance guys
Cheers Mat
ASRock X79 Extreme 6 & i7-4930k UEFI OC help!
in Sandy Bridge-E / Ivy Bridge (X79) OC
Posted
Ok awesome I will try that, now this board also has a 4.4, 4.6, 4.8 etc pre-made settings, scrub that and just use core voltage and the multiplier and nothing else, i'll give that a try thank you mate