Jump to content
HWBOT Community Forums

Intel most high end platform Core i7-950 with GIGABYTE X58A-UD3R OC Guide


windwithme

Recommended Posts

I still remember Intel launched new platform in November 2008. It started the Core i7 Age.

This platform is LGA1366, and CPU is Core i7 series. The chipset is X58+ICH10R.

Half years later, Intel announced LGA 1156 platform and CPU has Core i3, i5 and i7 which is wider product range.

For LGA 1366 market position is not big impact compare to P55.

 

Currently, LGA 1366 platform strength are 3-channel memory and multi PCI-E x16.

The weakness is X58 power consumption is higher. The entry model is same as mid range LGA 1156 platform.

End of March, Intel announced first 32nm 6-cores 980X CPU for X58 platform to extend its’ life cycle.

Internet also has many news about next 6C12T Core i7-980X in 2011.

 

Back to our topic - Intel Core i7-950. Blue box is representing Intel.

The price is 9100NT, around 299USD.

i795001.jpg

 

Inside the box, there are CPU, original copper-bottom cooler, manual and Intel sticker.

i795002.jpg

 

The clock is 3.06GHz, support Turbo Boost to achieve 3.33GHz.

Physical 4 Cores with Hyper-Threading to reach 8 threading, also called 4C/8T.

45nm manufacturing, Max TDP 130W, 8MB L3 Cache. The spec above are all entry LGA 1366 CPU spec.

i795003.jpg

 

MB is GIGABYTE X58A-UD3R, the entry model for high end X58 chipset.

The price is around 7500NTD, 250USD.

i795004.jpg

 

Light blue and white colors design. The overall components and design are good.

i795005.jpg

 

Lower-Left Corner

2 X PCI-E X16 supports X16 and 2-Way/3-Way ATI CrossFireX/NVIDIA SLI technology.

2 X PCI-E X16 supports X8

Realtek 8111E LAN Chip

Realtek ALC889 supports 7.1 channel and High Definition Audio/Dolby Home Theater technology

Design in Taipei

i795006.jpg

 

Lower-Right Corner

6 X Blue SATAII, provided by ICH10R, SATA2 supports RAID 0, RAID 1, RAID 5 and RAID 10

2 X White SATAII, provided by GIGABYTE SATA2 chip, SATA2 supports RAID 0, RAID 1 and JBOD

1 X IDE, provided by GIGABYTE SATA2 chip

2 X White SATAIII, provided by Marvell 9128, SATA3 supports RAID 0, RAID 1

Dual BIOS, dual protection

i795007.jpg

 

Upper-Right Corner

6 X DIMM DDR3 supports 800/1066/1333/1866/2200(OC) and the maximum capacity is DDR3 24GB.

DDR3 uses 2 phase PWM and next is 24-PIN power connector.

i795008.jpg

 

Upper-Left Corner

LGA 1366 CPU socket. The electroplating metal cover for better looking.

Back is 8PIN design, UD3R uses 12 phase PWM to fulfill X58 platform Core i7 power.

i795009.jpg

 

IO

4 X USB 2.0(Black/Yellow)

2 X USB 3.0(Blue)

1 X RJ-45 LAN port

2 X eSATA/USB 2.0 combo (Yellow)

1 X S/PDIF Fiber/Coaxial output

1 X 1394a

clr CMOS button

i795010.jpg

Link to comment
Share on other sites

System Configuration

CPU: Intel Core i7-950

MB: GIGABYTE GA-X58A-UD3R

DRAM: CORSAIR DOMINATOR-GTX3 DDR3-2400

VGA: GIGABYTE GTX460 OC

HD: Intel X25-V 40GB RAID 0

POWER: CORSAIR Gold AX750W

Cooler: Mega Shadow Deluxe Edition

OS: Windows7 Ultimate 64bit

i795011.jpg

 

Default performance

CPU 133.2 X 24 => 3197.8MHz 1.088V

DDR3 1865.2 CL8 9-7-24 1T 1.500V

 

Hyper PI 32M X8=> 17m 04.626s

CPUMARK 99=> 504

i7950dpi.png

 

Nuclearus Multi Core => 21816

Fritz Chess Benchmark => 24.63/11822

i7950dnm.png

 

CrystalMark 2004R3 => 257373

i7950dcm.png

 

CINEBENCH R11.5

CPU => 5.53 pts

CPU(Single Core) => 1.12 pts

i7950dcb.png

 

Windows Experience Index - CPU 7.5

i7950dwind7.png

 

PCMark Vantage => 15799

i7950dpcvan.png

 

i7-950 spec is over 3GHz already. When user enable Turbo Boost, the clock can pull to 3.2~3.3GHz.

i7-950 can get very good scores in most common benchmark software. The CPU performance has achieved high end segment.

Also, DRAM can OC to DDR3 1866 without pulling CPU frequency and combine exclusive 3-channel technology, the overall performance can be enhanced more.

 

This time, I use new mid-end VGA - GTX460. I also test some 3D benchmark to compare the LGA 1366 performance.

3D Performance

3DMark Vantage => P17078

CPU SCORE => 47850

GPU SCORE => 14063

i7950d3dvan.png

 

StreetFighter IV Benchmark

1920 X 1200 => 209.18FPS

i7950dstf4.jpg

 

DEVIL MAY CRY4

1920 X 1200 => 156.96/133.44/161.89/115.24 fps

i7950ddmc4.jpg

Link to comment
Share on other sites

FINAL FANTASY XIV

1920 X 1080 => 3172

i7950dff11.jpg

 

LOST PLANET 2

DX11 1920 X 1200 TEST A - 37.5 fps

i7950dlp2.jpg

 

GTX460 is mid-end VGA market, and its performance is quite well in the above games.

OC version clock is 715MHz which is higher than normal GTX460.

3DMark Vantage is also over 17000. LOST PLANET 2, need very high 3D performance, is over 37 pages as well.

 

BIOS OC Setup

Main BIOS Tuning Menu, called M.I.T.

i7950b01.jpg

 

System Status and Info

i7950b02.jpg

 

CPU 200Mhz/DDR3 2000 Setup Page

i7950b03.jpg

 

Memory Setup Page

i7950b04.jpg

 

Advanced DDR3 Parameter Setup

i7950b05.jpg

 

Voltage Page

Load-Line Calibration Standard/Level1/Level2

CPU Vcore 0.50000~1.90000V

QPI/Vtt Voltage 1.075~2.015V

CPU PLL 1.300~2.520V

IOH Core 1.000~2.000V

DRAM Voltage 1.300~2.600V

i7950b06.jpg

 

Besides CPU, DDR3 quality, voltage is also important for OC.

You can see the X58A-UD3R setup pages above, QPI/Vtt Voltage is important for pulling high clock.

CPU operates at 200/2000 stable will need 1.45~1.55V.

The voltage setup is the key factor for OC X58 chipset.

 

DDR3 Bandwidth Comparison

DDR3 1865.2 CL8 9-7-24 1T 1.500V

Sandra Memory Bandwidth - 28574 MB/s

ADIA64 Memory Read - 16057 MB/s

MaXXMEM Memory-Copy - 21755 MB/s

I7950DMEM.png

 

DDR3 2000 CL8 9-7-24 1T 1.600V

Sandra Memory Bandwidth - 30813 MB/s

ADIA64 Memory Read - 21072 MB/s

MaXXMEM Memory-Copy - 21755 MB/s

i7950omem.png

 

LGA 1366 platform is the only platform supports 3-channel technology. The DDR3 bandwidth is extremely high.

Especially, when OC to DDR3 2000, the performance is almost double.

DDR3 performance increased is the key strength for Intel phase in Core i7.

Link to comment
Share on other sites

OC Performance

CPU 200 X 20 => 4000MHz 1.392V

DDR3 2000 CL8 9-7-24 1T 1.600V

 

Hyper PI 32M X8=> 14m 04.133s

CPUMARK 99=> 628

i7950opi.png

 

Nuclearus Multi Core => 26426

Fritz Chess Benchmark => 30.61/14690

i7950onm.png

 

CrystalMark 2004R3 => 313158

i7950ocm.png

 

CINEBENCH R11.5

CPU => 6.88 pts

CPU(Single Core) => 1.40 pts

i7950ocb.png

 

Windows Experience Index - CPU 7.7

i7950owind7.png

 

PCMark Vantage => 18251

i7950opcvan.png

 

After i7-950 OC to 4GHz, you can compare the detail performance difference.

The performance increases over 20% in most benchmark software.

There is only Windows Experience Index is almost the same.

It’s due to Windows Experience Index is the estimate system performance. It doesn’t test too detail items.

This system get 7.7 of 7.9 is very high score already.

I used to test several better quality Core i7, most need 1.30~1.392V to OC to 4.2GHz. Just for your reference.

 

3D Performance

3DMark Vantage => P17254

CPU SCORE => 54034

GPU SCORE => 14063

i7950o3dvan.png

 

StreetFighter IV Benchmark

1920 X 1200 => 210.98FPS

i7950ostf4.jpg

 

DEVIL MAY CRY4

1920 X 1200 => 154.46/127.41/166.21/116.81 fps

i7950odmc4.jpg

 

FINAL FANTASY XIV

1920 X 1080 => 3209

i7950off11.jpg

Link to comment
Share on other sites

LOST PLANET 2

DX11 1920 X 1200 TEST A - 40.1 fps

i7950olp2.jpg

 

In the same GPU clock, let’s compare the performance by CPU difference.

3DMark Vantage GPU score is almost the same, but the CPU score raise around 13%.

FINAL FANTASY XIV, DEVIL MAY CRY4, StreetFighter IV Benchmark 3D performance also raise a little.

However, it doesn’t mean higher CPU clock doesn’t help 3D performance. It’s possible that CAPCOM games don’t rely on CPU.

In the market, there are many GAME needs high CPU ability.

 

i795012.jpg

 

For Intel hi-end X58 platform, the entry model price always keeps at 300USD.

Since i7-920, i7-930 and i7-950 are all in this range.

The hi-end one is 32nm 6C12T 980X Extreme to replace 45nm 4C8T 965/975 Extreme.

So if you own LAG 1366 platform, you no need to envy 2011 Sandy Bridge.

After all, LGA 1155 is 32nm 4C8T i7 product line, so far there is no news about 6C12T CPU.

 

i795013.jpg

 

LGA 1366 is long life product in Intel platform.

Since Nov 2008 launched, Intel will launch new LGA2011 chipset in 2011 Q4.

This part is not same as LGA 1156 users which need to upgrade soon.

In multi-core performance, 980X and 990X can provide upgradeable higher performance.

Although I know the price is high, but it’s still better than no 32nm 6C12T CPU can choose.

 

Last thing about X58 product line is X58 having wide product range in the market due to every vendor launched many models in past 2 years.

The most entry X58 chipset MB is same as X58A-UD3R around 250USD.

Compare to the other same price range P55 products, even the entry X58 products spec is still better than P55.

This is windwithme 15th LGA 1366 review in past 2 years. I hope it can be your reference data before purchasing. :)

 

This article is also published in my personal blog. WIND'S 3C

You are welcome to check any time.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...